SP Bel-Art

With a 1000ml (32oz) capacity, this wash bottle is an essential tool for any laboratory that frequently uses isopropanol. The wide-mouth design ensures easy filling and reduces the risk of spillage, making it a highly practical choice for busy environments. The bottle is crafted from low-density...

Stainless steel, laboratory type tongs have 7.6cm (3") tips coated with brown Teflon® FEP. Coating complies with FDA regulations governing direct food contact applications Provides an anti-stick surface for easier material handling and release

Cylindrical alnico magnet sealed in polygon-shaped Teflon shell

Flexible, Teflon® rod with a powerful Alnico Teflon® coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps. Flexible white rod is 33cm (13") long Autoclavable

Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.

Polypropylene Excellent chemical resistance Molded pitchers with large, comfortable handles and well designed pouring spouts Graduations are metric, permanently translucent on outside wall Steam autoclavable at 121°C (250°F) Shatter-proof

Choose from a variety of features in these digital stem thermometers that are suitable for field studies, wet lab applications, wash down areas, food testing and tanks. Will read temperatures in liquids, semi-solids and gases 3” to 7.75” probes easily reach into cuvettes, test tubes,...

For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm (3') lower...

Make accurate additions of precious materials as needed. Rotating the toothed thumb wheel vibrates the curved tip spatula, giving you control over transfer from spatula to weighing dish. Available with a plain stainless steel blade or with a brown Fluo-Kem® Teflon® FEP coating Coating...

Stack up to Five Units Perforated shelves are movable to suit your dry storage needs in this desiccator cabinet that stacks up to 5 units high. Smoke-tinted, polystyrene Two removable shelves can be set at four heights Pull down door slides out of the way into a compartment located underneath the...

Available in two lengths to suit your needs, these sterile liquid thieves draw a sample with a simple pull of the handle, then dispense easily into the vessel of your choice. Ideal for sampling water and other low viscosity liquids, oils and ointments; 0.15cm (¹⁄16") tip hole...

These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding...

Ideal for both production work and laboratory use, Pharma Scoops are used by pharmaceutical, food, cosmetic, and chemical companies. Bright red color reduces chance of scoop being left behind in a sample; can serve as code to avoid cross contamination; can provide contrasting background for light...

These sterile powder samplers are ideal for taking a single, targeted 50ml sample from free-flowing powders and granules. After insertion, rotate tube to open then close the collection slot, and remove to retrieve the sample Made from FDA and EU conforming materials; safe for food, drug and cosmetic...

Clear, unbreakable polycarbonate cylinder has a 245ml capacity and is 3.3cm I.D. x 30.5cm H (1?” x 12”) with removable 4” polyethylene base. Hydrometer not included.

This assortment of 22 stepped and straight tubing connectors comes in handy around the laboratory, and contains fittings compatible with tubing from 3.2 to 12.7mm (? to ½"). Chemical-resistant polypropylene for use with a wide range of liquids or gases Includes 12 Stepped Tubing...

Table-top Buchner funnels with medium porosity (45-90 microns) fixed filter plates are 6.4mm (1/4") thick high density polyethylene with a non-porous circumference to better fasten filter paper to the plate. The high density polyethylene rigid plate is 4.8mm (3/16") thick. Holes are 4.8mm...

Flast flowing with Fritware® Porous Plates HDPE with sealed-in, polyethylene filter plate of coarse porosity (90-130 microns) Offer good retention and fast flow under vacuum Can be used with or without filter paper Use below 52°C (125°F)

This polypropylene jar improves on the classic tapered square design with a larger opening for easier placement and removal of slides. The polypropylene screw cap is 5.3cm in diameter, has a flat top, easy grip knurled edge, deep thread and a seal ring to prevent leaks. Five internal slots hold up...

For all of your magnetic separation experiments, these powerful racks sequester magnetic beads so that affinity ligands (antibodies, streptavidin or proprietary reagents for coupling nucleic acids) or rinse solutions can be added or decanted in assays. They offer exceptional quality and value...

For convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring High-density...

Compact Size Saves Bench Space This non-corrosive support stand with stainless steel mounting rod provides modern advantages over metal ring stands. The compact polypropylene base has a smooth surface making cleaning easy, and measures 21 x 16cm (8-1/4 x 6-1/4”) x 4.5cmH (1-3/4”). At a weight of...

Maintain the 96-Place Format of High Throughput Applications with Large, 15mL Test Tube Capacity Ideal for mimicking the 96-place format used in microplates, deep-well plates and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid temperature...

Sturdy, stable polypropylene rack is made specifically for organizing and protecting 3mm O.D. thin-walled Nuclear Magnetic Resonance tubes. Holds up to 72 tubes in a 6 x 12 array. Hemispherical wells in the lower deck cradle tubes Sturdy, stable polypropylene construction Handles at each end for...