SP Bel-Art

Neutralize Autoclave Odors with a Choice of Four Fragrances Heat-released deodorant pads neutralize autoclave odors with one of four pleasant scents. Simply open foil pouch and place pad in bag prior to autoclaving Pads have a three year life span; will last longer if stored in a sealed container...

Convenient wire racks keep disposable glove or tissue boxes handy Internal dimensions of individual compartment: 12.7cm W x 9.5cm D (5 W x 3-3/4" D) Racks available for 1, 2 or 3 boxes Each box is held in its own compartment and can be easily replaced Durable epoxy coated steel wire racks are...

This hand controlled tool allows users to take liquid samples at specific depths. Simply place thumb over top hole, insert to desired depth, remove thumb to allow liquid to enter the tube, place thumb back over tube to prevent liquid from moving in or out, and remove. Polyethylene plastic sampler...

Designed specifically for safe, convenient storage Sits flat on the bench top for convenient access without “dropping” other pipettes Has capacity of up to four sterilization cans Durable epoxy-coated surface Autoclavable Pasteur Pipettes, used in high volume for inoculating media,...

Two lengths to fit a wide range of vessels Autoclavable While many magnetic stirring bars are impeded by powders in a liquid, the Saturn Spinbar overcomes this problem. A large bulb in the bars center lifts the stirring bars ends while spinning thereby reducing surface contact area and allowing the...

Hold Fragile Spectrophotometer Cuvettes in Complete Safety These two tier racks support cuvettes with a minimum of physical contact, greatly reducing the chance of damage. Only the corners of the cuvettes touch the racks Accommodate 12 cuvettes of 10mm light path Will not scratch quartz cuvettes...

Chemically inert, polyethylene container has a deep screw cap to provide maximum protection against breakage. Once cap is removed slides project 12.7mm (½") out of the jar for easy grip and clean handling. Internal grooves accept 5 to 10 microscope slides 25 x 75mm (1 x 3"); can be...

Bottle contains 473ml (1 pint) Spray pump with every bottle Provides anti-static and anti-fog protection for glasses, goggles, microscope eyepieces, etc. Simple and safe to use Bottle contains a non-silicone fluid that cleans, polishes, anti-stats, and anti-fogs lenses. An easy to use spray pump is...

Small enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable

Scienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) and are unmatched at preserving sample volume. These sterile, 40µm or 70µm porosity strainers remove cell aggregates and create uniform single cell suspensions...

These sterile Jumbo Pipettes are ideal for sampling from narrow- or wide-mouth containers up to 208-liter (55 Gallon) drums. Reaches into container while keeping hand clear of contents Diameter allows for use through drum bunghole or other small openings Color-coded end helps prevent handling errors...

These polypropylene plastic forceps have serrated tips to ensure a firm grasp. Strong and durable Steam autoclavable up to 121°C (250°F)

The strong, permanent adhesive on these labels withstands cold storage temperatures and maintains adhesion to glass, plastic, cardboard and more, even in liquid nitrogen. Organize and label samples for short or long-term cold storage Ideal for -80°C to -196°C environments Dot and rectangle...

All the features of the Secador 1.0 desiccator cabinet Carry handle for portable convenience Double latches, two shelves Dimensions (H x W x D): 14.7" x 8.4" x 16.3" (37.3 x 21.3 x 41.4 cm); volume 0.75 ft 3 .

The attractive design and sturdy construction of the Secador® line of desiccator cabinets assures easy and reliable storage of moisture and UV sensitive products. Choose from an extensive selection of sizes, styles and colors to meet your specific dry storage needs.  Durastar®...

Minimize Pipetting Errors Make precise additions of liquid components to microplate wells by adjusting plates to the most convenient angle. The angular presentation of the plate and clear acrylic platform beneath allows you to easily judge which wells have received liquid addition by comparing the...

Available with and without faucet Molded low-density polyethylene Rugged, long-lasting and corrosion-resistant Heavy walls and wide, top flanges Can withstand temperatures up to 77°C (171°F) Faucet models feature a needle type polyethylene faucet with 12.7cm (1/2") bore

The Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,...

This desiccator cabinet is ideal for creating a carbon dioxide atmosphere for tissue culture processing or flushing with nitrogen to create an anaerobic environment. Two gas ports allow the cabinet atmosphere to be rapidly and effectively flushed. The gas port stopcocks are 4mm diameter and accepts...

Accurate and Economical Liquid Dispensing Avoid outside contamination with this highly accurate closed system. Borosilicate glass burettes have white 0.1ml graduations and are mounted to a high-density polyethylene screw cap Squeezing the flexible polyethylene bottle forces liquid into the burette...

Fits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing combinations...

Large to Small Volumes, the Spinpak® Assortment has You Covered A 10-pack of the most commonly used Spinbar® Octagonal Magnetic Stirring Bars in a variety of colors and sizes. Eight-sided Spinbar® Octagonal Magnetic Stirring Bars provide greater surface area and added turbulence when...

Polypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)

The Petri Dish Incubation Tray holds 100mm (4") Petri dishes securely on an incubator rack. Excellent aid for keeping cell cultures organized 28 holes in bottom allow air passage; 19mm (3/4") in diameter 1.6mm (1/16") thick, white epoxy-coated steel Steam autoclavable at 121°C...