PerkinElmer Lab Supplies

This kit contains: 5mL x 0. 63mm outer diameter syringe 2mL clear sample vials (144) 2mL amber sample vials (100) blue crimp caps with septa (100) green crimp caps with septa (100) red crimp caps with septa (100) septa for waste/wash vials (100) crimper - 11mm decapper - 11 mm 2 mL vial rack

For use with the PolyScience® WhisperCool™ Refrigerated Chiller 240 V, 50 Hz, 12.2 A part number N0772045 and the PolyScience® WhisperCool™ Refrigerated Chiller 208-230 V, 60 Hz, 12.2 A part number N0772046

The PerkinElmer auto-ignite jet assembly comes with a FID detector and the auto-ignite mechanism of the jet makes it easy to use.

These thin ultra-light foil pans can be used to run HyperDSC methods on solid samples. The thin material provides optimal thermal contact between the sample and the sensor. The "sample wrap" reduces thermal gradients while scanning at fast rates.

PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your ICP-OES and ICP-MS applications. Remember to replace your tubing frequently and always keep spares on hand.

Our closures with septa are made in a wide variety of sizes and materials ensuring you have the right combination for your sample type and analysis temperature. Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be...

Our extensive quality control and inspection process demands the very best quality sources. Choosing a PerkinElmer deuterium, tungsten or xenon source provides outstanding ultraviolet and true visible performance. Exceptional performance anywhere in the detector’s 190 – 700 nm wavelength range. Lamp...

Replaceable quartz window that slides into the purge extension between the torch and the optics. The Radial Purge Extension Quartz Window is constructed for use with Optima 2x00/3000/7000 DV/8000 systems. This short tube design facilitates effective purging, which is crucial for maintaining sample...

Fitting Size (in.): 1/16" Ferrule I.D. (mm): 0.4 Column I.D. (mm): 0.18 - 0.25

This Three-Stop Peristaltic Pump Tubing is designed for use with the FIAS, FIMS, and the S10 Autosampler. It can also be used with the AS9X Autosampler and ships as a package of 6.

2mm Split Mode Quartz Liner for Programmed-Temperature Split/Splitless Inlet System

A complete High Sensitivity plastic body nebulizer with Pt/Ir capillary and Viton o-rings. This nebulizer is fabricated of inert plastic materials for maximum performance and corrosion resistance. It's compatible with the PerkinElmer AAnalyst 200/400/700*/800* AA instruments. Note: The AAnalyst...

Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

System 2 electrodeless discharge lamp for the detection of elemental Selenium (Se). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are typically...

The ASXPRESS PLUS FEP-covered carbon fiber sample probe is 10 inches in length, and with tubing, has a capillary length of 75 inches. This probe kit Includes: PFA capillary tubing Capillary tube connection fitting Probe clamps, qty. 2 Ferrule, qty. 1 O-rings, qty. 5

This torch module mounting block is a sample introduction component used with Optima ™ 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV and 8x00 ICP-OES series instruments.

1% HNO3, 10 g/L: Cd, Cr, Fe, In, Mg, Pb, 10 g/L: Co, Cu, Se, 500 mL

The Flared Peristaltic Pump Tubing starter pack includes 4 of each commonly used sizes: Orange/Red PVC Pure tubing, 0.19 mm inner diameter Green/Yellow PVC Pure tubing, 0.44 mm inner diameter Yellow/Orange PVC Pure tubing, 0.51 mm inner diameter Gray/Gray Santoprene tubing, 1.30 mm inner diameter

Use for trace metal analysis. Check your standard curve. Economical, 100mL volume. Quality Control Standard, 7A Elements, Matrix per Volume 5% HNO₃ per 100mL, Concentration of Element: 100mg/mL Aluminium, 100mg/mL Barium, 100mg/mL Boron,1000mg/mL Potassium, 500mg/mL Silicon, 50mg/mL...

Potassium Bromide (KBr) KBr has a slightly wider spectral range than NaCl but is more hygroscopic. Although able to provide good resistance to mechanical shock, KBr is easily cleaved. KBr can be used up to 300 °C.

High efficiency oxygen trap has a capacity of 2.5 liters at room temperature. It is also effective for removing sulphur compounds such as hydrogen sulfide and mercaptans. This oxygen trap is for use with nonoxidizing gases such as; He, Ar, N2, and CH4. Oxygen removal to below 70 ppb using normal GC...

Sample cups are of heavy-duty construction to prevent cracking or tipping. Their conical design allows for use of nearly the entire sample. Translucent; preferred for most solvents.

PerkinElmer vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.Our vials are manufactured from Type I Borosilicate Glass, which meets all USP, JP, and EP Pharmacopeia requirements. The glass performs excellent at high...

Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum...