PerkinElmer Lab Supplies

PerkinElmer Lab Supplies

Products (591)

Compare Tool

Select up to 3 products

  • P7+ prepFAST sample valve

    P7+ prepFAST sample valve with CTFE stator and 1mm PFA rotor. Includes center and side mixing ports.

  • Replacement Glow Plug

    Two sizes of aluminum capsules are available. The smaller, with an internal volume of 4 mL, can hold sample weights up to 2.5 mg. The larger, with a 30 mL internal volume, accommodates samples up to 20 mg. Sealing of the larger capsule should be carried out in the presence of helium or argon to...

  • Platinum Sampler for NexION 1000/2000/350/300 S

    Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum...

  • Arsenic (As) System 2 Electrodeless Discharge Lamp

    System 2 electrodeless discharge lamp for the detection of elemental Arsenic (As). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are typically...

  • Deluxe Tool Kit

    PerkinElmer

    Deluxe Tool Kit

  • STANDARD TUNGSTEN FILAMENT & ASSEMBLY

    Standard Filament.

  • Cyclonic spray chamber drain fitting

    Cyclonic spray chamber drain fitting with ETFE capillary tubing - 24 length by 0.030 ID x 0.062 OD.

  • Replacement Air Intake Filter for oil free Compressor

    PerkinElmer's Replacement Air Intake Filter is specifically designed for oil-free compressors, ensuring clean air intake and optimal compressor performance. Its efficient filtration capabilities protect the compressor from dust and particulates, extending its operational life. This filter is easy to...

  • Instrument Calibration Standard 2, Matrix per Volume 5% HNO3 per 100mL

    Instrument Calibration Standard 2, Matrix per Volume 5%HNO3 per 100mL, Concentration of Element: 100mg/mL Ag,100mg/mL Cr, 150mg/mL Mn, 400mg/mL Ni, and 200mg/mL Zn. We recommend a 100-fold dilution with high-quality 5% HNO3. All the solutions you need for daily calibration of your ICP and HGA tor...

  • End-Capped THGA Graphite Tubes with Advanced Platform

    The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an...

  • Rectangular Sodium Chloride Sealed Cell, Pathlength: 0.1mm

    The sealed liquid cells have a corrosion-resistant construction making them ideal for highly volatile samples. The sealed liquid cells are ideal for quantitative analysis where you require an accurate reproducible cell thickness. These cells use a lead spacer which is amalgamated to the window...

  • Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler, Capacity: 9/29, Sample Vessel Size: 50mL/15mL

    The PerkinElmer Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler (rinsing-port rack) with rinsing port location (location 0), 8 locations for 50 mL solution containers, and 29 locations for 15 mL solution containers.

  • Fixed 2.0 mm I.D. Injector Quartz Torch (Blue Mark) for NexION 2000/1000

    This one-piece quartz torch, marked blue, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Base Configuration's Sample Introduction Kit (N8150034).

  • Orange/Blue 0.25 mm i.d. Flared PVC Peristaltic Pump Tubing

    PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your ICP-OES and ICP-MS applications. Remember to replace your tubing frequently and always keep spares on hand.

  • Right Instrument Filter

    Two Right Instrument Filters are included in the NexION 2000 ICP-MS Base Configuration's Consumable Kit (N8150054), Core Configuration's Comsumable Kit (N8150055), Productivity Configuration's Consumable Kit (N8150056), and Semi Configuration's Consumable Kit (N8150057).

  • Purple/Purple 2.06 mm i.d. PVC Peristaltic Pump Tubing

    PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your ICP-OES and ICP-MS applications. Remember to replace your tubing frequently and always keep spares on hand.

  • Cobalt (Co) Lumina Hollow Cathode Lamp

    Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Cobalt (Co). Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and the highest performance. PerkinElmer offers a wide range of single-element and...

  • Red/Red 1.14 mm i.d. Santoprene Peristaltic Pump Tubing

    PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your ICP-OES and ICP-MS applications. Remember to replace your tubing frequently and always keep spares on hand.

  • 0.5 mm I.D. MEINHARD Nebulizer Internal Standard Tee for NexION 2000/1000

    The internal standard mixing tee is perfect for online addition of internal standard or online dilution. Achieves excellent mixing with minimal dead volume.

  • MPP Santoprene Tubing, 1.30mm, grey grey

    PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your applications. Remember to always keep spares on hand.

  • A 1/8 inch replacement nut for the programmed-temperature split/splitless inlet system for the AutoSystem

    A 1/8 inch replacement nut for the programmed-temperature split/splitless inlet system for the AutoSystem.

  • Silver Vanadate, 40 g.

    Our scientists select the purest raw materials, condition them, then test them on PerkinElmer analyzers.

  • Visible Spectrum Calibration Set (UV Standard)

    Set of reference materials to verify the ordinate and abscissa (wavelength) accuracy of UV/Vis and UV/Vis/NIR Spectrometers. The set comprises four glass filters mounted in precision aluminum spring mounts. They are designed for use with the standard 10 mm cuvette holders of most UV/Vis and...

Compare Tool

Select up to 3 products