PerkinElmer Lab Supplies

PerkinElmer Lab Supplies

Products (591)

Compare Tool

Select up to 3 products

  • Manganese (Mn) Pure Single-Element Standard, 1,000 µg/mL, 2% HNO3, 125 mL

    Concentration: 1,000 µg/mL Matrix: 2% HNO3 Volume: 125 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities reported at...

  • Replacement Air Filter Element for Filter Assembly N0775325

    Replacement Air Filter Element for Filter Assembly N0775325

  • TFM Pressure Seal for Standard 75 mL (40 Bar) Digestion Vessels

    This is a replacement part. The pressure seal is also available in the Consumable Kit (PN N3132000) for your convenience.

  • Brass Back Ferrule, Size: 1/8in

    Brass Back Ferrule, Size: 1/8in, Pkg 5

  • Alumina Injector 2.0 mm i.d. for Avio

    A robust option ideal for a wide variety of applications. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.

  • Iron (Fe) Lumina Hollow Cathode Lamp

    Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Iron (Fe). Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and the highest performance. PerkinElmer offers a wide range of single-element and...

  • Flow Spoiler

    PerkinElmer

    Flow Spoiler

  • Stainless Steel High Pressure Capsules

    Includes 5 stainless steel capsules and 20 gold-plated copper seals. For DSC runs where high pressure is expected in the capsule, we recommend you use high pressure capsules. The capsules are safe to handle due to a bursting disk on the cover of the capsule which allows the sample to escape if the...

  • Dual-Stage Detector Improved

    The Dual-Stage Detector is designed for better stability and longer lifetime than its predecessor. ELAN instruments produced after April, 2005 have the proper electronics to accept this detector without modification. ELAN instruments manufactured before April, 2005 will require a onetime upgrade to...

  • Hyper Skimmer Cone Screw for NexION 1000/2000/300/350

    This hyper skimmer cone screw is used with NexION 1000, 2000, 300 S, 300 Q, 300 X, 300 D and 350 ICP-MS series instruments.

  • Gem tip Cross-Flow II Tip Kits for Optima 8x00

    The PerkinElmer GemTip Cross-Flow II Tip Kit is for use with the Optima 8x00 ICP-OES. Excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids. The Tip Kit includes a clear sapphire sample tip and a red ruby argon tip....

  • AA Ultra Quiet Oil-Less Air Compressor Micron Dryer Filter Element

    With the addition of a water separator with a 5 micron particle filter, no liquid transfers into the air supply, providing you with contaminant free air. Each quiet, vibration free compressor comes standard with an internally and externally coated air tank with top drain. The AA Ultra Quiet Oil-Less...

  • Nickel Sampler Cone for NexION 1000/2000/350/300 Q/X/D

    Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum...

  • Lead (Pb) Pure Plus Single-Element Standard, 1,000 µg/L, 2% HNO3, 125 mL

    Concentration: 1,000 µg/L Matrix: 2% HNO3 Volume: 125 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities reported at...

  • Sodium (Na) Lumina Hollow Cathode Lamp

    Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Sodium (Na). Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and the highest performance. PerkinElmer offers a wide range of single-element and...

  • MIR Polystyrene Reference Card

    Instrument Performance Validation Kits are available for both Mid-IR and Near-IR FT-IR instruments. All the kits include a polystyrene Traceable Reference Material (TRM) for abscissa calibration valid for three years. The Mid-IR IPV kits also include NG11 Schott Glass Reference Material (RM) for...

  • Oil Standard Sulfur Concentration 1000 µg/g -50g

    The Sulfur (S) Metallo-Organic Standard from PerkinElmer is ideal for your ICP-MS applications.

  • High Flow Sample Probe, Carbon fiber support, 0.8mm i.d. (blue marker)

    Size: 0.50 mm i.d.(orange), 150 cm

  • Rinsing Port for AS-93 Plus/S10 Rinsing Kit

    The Rinsing Port for AS-93 Plus/S10 Rinsing Kit by PerkinElmer is essential for maintaining the cleanliness of your sampling equipment. This port facilitates efficient rinsing, helping to prevent contamination between samples. Constructed from high-quality materials, it offers reliable performance...

  • White/White/White 1.02 mm i.d. Solvent Resistant Yellow Peristaltic Pump Tubing, 3-stop

    Peristaltic Pump Tubing Resistant to Organic Solvents for AA, ICP-OES, ICP-MS and FIAS-200, Thickness: 0.84mm, Inner Diameter: 0.84mm, Color white/white

  • Arsenic (As) Pure Single-Element Standard, 1,000 µg/mL, 2% HNO3

    Concentration: 1,000 µg/mL Matrix: 2% HNO3 Volume: 500 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities reported at...

  • Filter For Mercury Analyzer

    Ensure precision and reliability in your Flow Injection Mercury System (FIMS) with the high-quality filter from PerkinElmer. Specifically designed for mercury analyzers, this filter promises to effectively eliminate any potential impurities, thereby enhancing the accuracy of your results. Suitable...

  • Autosampler Carbon Fiber Sample Probe

    The carbon fiber reinforced probes are designed to be mounted to a Z-drive with two probe clamps and without a guide plate. The carbon fiber probes can also be used with the prior version Z-drives, but the guide plate must be used. Most CETAC autosamplers built since January 2009 are equipped with...

  • PEEK Tubing, Outer Diameter: 1/16in, Inner Diameter: 0.010in, 5ft

    Quickly stop a flow stream Ideal for high pressure and high temperature applications, this 5-foot length of PEEK tubing brings precision and reliability to your lab setup. With an outer diameter of 1/16 inch and an inner diameter of 0.010 inch, it provides a balance of flexibility and strength. The...

Compare Tool

Select up to 3 products