Labconco

Exhaust adapter for back to back ClassMate Fume Hoods to connect (2) 12" exhaust collar connections to one 12" connection. Constructed of powder-coated steel.

For use with Labconco CentriVap Pro Vacuum Concentrators. Anodized Aluminum and PTFE coated options available. To prevent loss of sample during centrifugation, limit sample volume to 30-50% of total sample container volume.

Protector Stainless Steel Controlled Atmosphere Glove Boxes Protector Controlled Atmosphere Glove Boxes provide a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment. Fiberglass-lined models are performance tested to maintain oxygen...

Labconco XPert Weigh Boxes use inlet and outlet HEPA filters to provide operators with a physical protective barrier against hazardous airborne particulates and powders. These boxes include an anti-static ionizer fan to reduce static charge and a balance vibrator isolator, both useful during...

Glass Trap fits inside the CentriVap Cold Trap's collector chamber to protect the chamber and lid from corrosive materials. Includes insulative cover, 1/2" stems and elbows. Included with CentriVap Acid Systems. Not compatible with pre-2005 CentriVap Cold Traps. Shipping weight 4 lbs. (2...

Built to standard desk height. Without bottom shelf or guard rails For use as a writing table, extra bench, or for transporting heavy instruments Two casters provided with foot operated wheel brakes Top is phenolic board with melamine laminated surface which resists staining and heat Holds up to 400...

Fast-Freeze Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are available...

Canister W/Stand For Chem Trap

The Protector Downdraft Powder Station keeps users safe by containing powders during fi ngerprint processing. The open-sided, open-top work station provides unrestricted operator movement and accommodates oversized evidence. Available in 2' and 3' widths, two or more Stations may be placed...

Solvent Vent Kit

Blue anodized aluminum blocks hold tubes of various sizes in an aluminum bead bath Aluminum construction promotes the conduction of heat or cold from the Temp-Zone area to help maintain sample temperature Beads sold separately

Protector Stainless Steel Double Controlled Atmosphere Glove Boxes Protector Controlled Atmosphere Glove Boxes provide a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment. Fiberglass-lined models are performance tested to maintain...

Rodent Barricade

Solid Epoxy Dished Work Surfaces are available in 2', 3', 4', 5' and 6' widths. They may be used to support a variety of Labconco enclosures including Paramount Ductless Enclosures, Purifier Class I Enclosures, Purifier HEPA Filtered Enclosures, Purifier Filtered PCR Enclosures,...

Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. An...

Rotary Vane Vacuum Pump, 195 liters/minute displacement at 60 Hz. 1.3 x 10-4 mBar partial pressure. Direct-drive, two-stage, oil-sealed, sliding-vane. Includes on/off switch, inlet and outlet ports, mode selector (High Vacuum and High Throughput), gas-ballast control (Closed, Low Flow and High Flow)...

Compact, corrosion-resistant housing Inherently safe design An accessory for the Demonstration Hood, XPert Balance Enclosure, Protector® XVS Ventilation Station or Protector® Work Station, the FilterMate uses a HEPA filter, carbon-based filter or a combination of both filters to remove...

Fully assembled from 18 gauge, 1 inch square steel tubing 4 inch diameter casters which absorb vibration over rough, uneven floors. Two have toe-locks. Two or four wire basket racks Includes removable drip pan Ergonomic, extruded rubber handle grips Lightweight, vinyl-coated portable wire baskets...

Use the Sash-Glider to clean both sides of a biological safety cabinet's sash while it remains closed, to avoid contamination risks. Kit includes: magnetic outside and inside blades 2 microfiber sheets 10 disposable white scrubbing strips Applicable Products: PuriCare Procedure Stations (2013...