Humboldt Products

The Deluxe Water Bath supports the following standards: ASTM D6927, D5581, D4867 Water Bath with microprocessor-based temperature control for precise temperature control throughout the range. Includes magnetic circulator, ensuring constant water temperature, and, a stainless steel shelf, which...

Made of nickel-plated zinc alloy, with hardened steel cutting wheels Spring-loaded, to remain open until used For tubes up to 38 mm diameter

Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

Universal Plasticol coated jaws Swivel jaws of stamped steel; forged steel shank Recommended for condensers and irregular shapes

Meets U.S. Pharmacopeia XIX. Made from hardened tool steel in accordance with specifications for Powdered Glass Test. Mortar has a flat-bottomed cylindrical cavity. Mortar: 76.2mm. O.D. cavity: 50.8mm dia x 43.9mm deep; Pestle: 50.4mm dia, 108mm overall length, Shipping. wt.: 8 Lbs

Distance from center of ring to center of clamp: 4-1/4" (108mm). Plated. Attaches to support rods up to 3/4" (19mm) in diameter.

Stainless Steel Curved Nose Scoops are designed for the accurate sampling and handling of powders and granules. The curved nose allows for easy access to containers and minimizes spillage during transfer. Constructed from durable stainless steel, these scoops provide longevity and hygiene in...

The Humboldt Mfg. Co S/J joint clamp is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures durability and long lasting usage.

The Humboldt Mfg. Co crucible tongs are suitable for use in research facilities and chemical laboratories while conducting experiments. They are made of high quality material which ensures long lasting usage.

The Humboldt, Small, Riffle-Type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such as...

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and...

Max. opening 1-7/8"(48mm), Stainless Steel, 1/4"(6mm) Wire Size, 9"(229mm) length

Two prong zinc-plated, stamped steel with aluminum alloy holder is adjustable by checknut to any angle Takes objects from 3/8” to 1 3/8” diameter. Fits rods up to 1/2” diameter. Length: 6 3/8”.

Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections.  *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11...

Heavy gauge nickel dishes have straight sides, flat bottom, and pour lip. These high-quality Nickel Evaporating Dishes serve as an essential tool in many laboratory applications. Made from robust and durable nickel, they are designed to withstand repeated heating cycles, making them ideal for tasks...

These threaded base plates are designed to attach to a tabletop or inverted into a recessed hole for flush mounting. Models are available with either a threaded hole completely through the center or with an unthreaded thru-hole. These die-cast units are supplied without rod. Other sizes are...

The Humboldt Medium, Riffle-type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such as...

Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

With heavy, rectangular base of plate steel, finished in hard enamel Zinc-plated steel rod is machined at lower end with U.S. National coarse thread 508 mm rod is 9.5 mm in diameter with 3/8-16 thread; 610 and 914 mm, 13 mm in diameter with 1/2-13 thread 8835B50 support is furnished with 8835C18...

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch...

These Application Thermometers provide a mercury-free alternative to ASTM mercury thermometers. They provide the same performance as a mercury thermometer, but use a blue liquid formula, which is non-toxic non-caustic, nonhazardous and biodegradable; and, meet or exceed the ASTM E2251 specifications...

Sand is specially graded natural silica sand graded to retain 98% on a No. 100 (150µ) sieve, 75% on a No. 50 (300µ) 30% on a No. 40 (425µ) and 2% on a No. 30 (600µ). Specific gravity is 2.65 Packed in 50 lbs. (22.7kg) bags

Screw Compressor Clamps are used to control the flow in flexible tubing. The clamps have a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. The clamps feature brass construction that is plated for corrosion resistance and...

1196Y59: Flexible stainless steel blade with straight edges and rounded ends. Blade is riveted into wooden handle. 4" long, straight-edge spatula, 3/4" x 4" (19mm x 102mm). 1196Y60: 6" long, straight-edge spatula, 7/8" x 6" (22mm x 152mm). 1196Y61: 6" long, straight-edge spatula, 1/2" x 6" (13mm x...