Select up to 3 products
The LaChrom Elite Autosampler represents a new standard of performance in HPLC. Whether you need high sample capacity, extreme precision, ultra-low carry over, or rapid cycle times between injections, the LaChrom Elite models excel.
Cemented or removable needles Reinforced plunger Replaceable barrel/plunger assembly Barrel and plunger are fitted for increased precision. Accuracy and repeatability are ±1%. Heavier metal plunger stem acts as support for the small plunger. Weight of the metal handle gives the syringe a...
The Microlab 600 Controller comes standard with the Basic functionality. For Advanced Controller functionality, the Basic to Advanced Controller Upgrade Kit (SD card) must be purchased separately.
Stationary Phase PRP-X400 Mode Cation Exchange Packing Material Type PSDVB/Sulfonic Acid Particle Size 7 µm Pore Size N/A Format Column Hardware Inner Diameter 4.6 mm Hardware Length 250 mm Hardware Material PEEK Max. Pressure (bar g) 5000 Exchange Capacity 2.5 meq/gm Mobile Phase Limits pH...
Volume 10 mL Syringe Type Gastight Syringe Series 1000 Termination Luer Tip Cemented Needle (LTN) Needle Cemented Needle Gauge 22 gauge Point Style 3 Needle Length 2 inch (51 mm) Needle Inner Diameter 0.0161 inches (0.41 mm) Needle Outer Diameter 0.0283 inches (0.72 mm) Std. Needle Dead Volume 6.81...
The latest generation of Hamilton autosampler syringes are recommended for use in Agilent's 1290 Infinity LC Injector HTC/HTS. Removable Needle (RN) Gastight syringe Needle: Small RN (CTC)
Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary...
Detailed Description PTFE tubing for ML500 valves with M6 threads Gauge 12 gauge Instrument ML500A, B, & C series Tubing Length 650 mm Tubing Material PTFE Tubing Point Non-tapered Tubing Threads M6 or 1/4-28 Tubing Volume 2042 µL ...
The Kel-F hub is made from CTFE plastic. Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are...
The Hamilton gastight 1701SN series 10 uL syringe is mainly used in research purposes involving injections.
The Hamilton 700 series 10 uL syringe is compatible with small removable needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig and temperature rating of up to 10 to 115 degree F.
Polymeric anion exchange packings for separation of inorganic and organic anions. Easily separate the eight common anions (fluoride through sulfate) Good separation of fluoride from the water dip Use with organic solvent from 0 to 100 % for elution of hydrophobic anions or column cleaning pH stable...
The Hamilton 1700 series 50 uL syringe is suitable for use with cemented needles. This syringe model offers borosilicate glass, PTFE and PCTFE fluid path. It can be used at a pressure rating of up to 1000 psig and temperature rating of up to 10 to 50 degree C.
Hamilton ORP buffers provide accuracy of ±5 mV with stability up to 2 years after date of manufacture. The 500mL bottle design uses Hamilton's unique calibration compartment which helps avoid cross contamination and only uses approximately 15 ml of solution.
The Hamilton 700 series 5 uL syringe is suitable for use with small removable needles. This syringe model offers SST, borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig (137.9 bar) and temperature rating of up to 10 to 115 degree C.
Genuine Hamilton electrolytes are needed to keep your laboratory sensors running smoothly. Complete the maintenance on your sensor by using Hamilton cleaning and storage solutions to ensure high accuracy and long life.
7000 Series Modified Microliter® Removable needles Replaceable barrels and parts No dead volume Positive displacement syringe for use with liquids. A tungsten plunger wire travels inside the needle, eliminating dead volume. Knurled hubs are used exclusively on the 7000 Series syringes allowing...
The Hamilton 1000 series 5 mL gastight instrument syringe with saltline plunger style features PTFE luer lock (TLL) termination. It is suitable for use with metal (N) or kel-F needles. This syringe model offers borosilicate glass, PTFE and UHMWPE fluid path. It can be used at a pressure rating of up...
The Metal hub is made from nickel plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs...
Volume 100 µL Syringe Type Microliter Syringe Series 700 Termination Cemented Needle (N) Needle Cemented Needle Gauge 22 gauge Point Style 3 Needle Length 2 inch (51 mm) Needle Inner Diameter 0.0161 inches (0.41 mm) Needle Outer Diameter 0.0283 inches (0.72 mm) Std. Needle Dead Volume 6.81...
Easy to use Pressure tested up to 100 psig Autoclavable Lever-actuated on/off valve for use with Luer Lock Gastight® syringes from 50 µL to 2,000 mL. Collect gas or fluid samples and transport or store them in their original sampling syringe. Teflon® fluid/gas path ensures the highest...
The Hamilton 700 series 500 uL syringe is suitable for use with cemented needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 1000 psig and temperature rating of up to 10 to 50 degree C.
Manufactured by Hamilton, the Glass Barrel exemplifies the perfect blend of robustness and precision. Known for its high resistance to a variety of chemicals, this glass barrel is an ideal choice for handling different types of liquid samples in a laboratory setting. Its durable construction is...