Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

Employs flint to produce a spark when snapped across rasp Rasp can be turned for fresh surface Zinc-plated hood traps gas for ready ignition Overall length 203 mm (8.1”). 

These noiseless burners provide a clear flame of any desired height from 1/2" (12.7mm) to 12" (305mm), with separate control of both flame temperature and flame length. The burners incorporate threaded aluminum air control sleeves and precision machined, fine-pitch brass needle valves…

Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Safety enhanced laboratory gas burner, battery operated with touch free IR-sensor and button function. Innovative technology that thinks with you! Fuego SCS pro with new functions & graphic display The Fuego SCS pro represents a new status among laboratory gas burners. The…

Small, portable, lightweight unit with built-in piezoelectric crystal for ignition Operates on butane gas Maximum flame temperature 1,300°C (2,400°F) Flame lasts up to two hours on a full charge of butane; reservoir capacity 26 grams Flame adjusted by means of needle valve…

Stainless steel design Long-lasting double tube system Sterilization period 5-7 seconds Self-locking angular adjustment The electrical sterilization system SteriMax is most suitable for the sterilization of inoculation loops, needles and instruments. It is ideal for laboratories…

Bunsen Burner, LPG - StabiliBase, Anti-Tip Design SIMPLE DESIGN This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve. Burner is designed to have the flame controlled via the valve…

Premium Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN This premium Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion FOR LPG Suitable for use with liquid petroleum gas (propane or butane). Burner…

The portable micro butane burner is easy to operate and has a 2-step ignition and adjustable flame control. It is supplied with a rubber gasket to keep it securely placed on a table top. The flame can reach a maximum temperature of approximately 1,300° Celsius (2,450° Fahrenheit). The burner can…

The portable butane burner is a great option for any lab because the wide base and low profile provides the burner with a stable footing. The support rings attached at the top, allow you to use the burner as a hotplate for laboratory glassware. The valve and ignition buttons are separate for…

Bunsen Burner, LPG - Flame Stabilizer, StabiliBase Anti-Tip Design SIMPLE DESIGN This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve and brass flame stabilizer. Burner is designed…

Hooded lighter is safe and economical. The hood traps gas and protects the lighting file. Replacement flints are also available.

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

The portable micro butane burner is easy to operate and has a trigger ignition and adjustable flame control. The simple on and off control and steady tip-resistant design, make it a useful and portable burner almost anywhere in the lab. The flame can reach a maximum temperature of approximately…

The safe alternative for traditional Bunsen burner or alcohol! Flame without a match Innovative Security Technology Easy-to-use Low cost and environmentally friendly Minimum space requirement Multi-Talented The Flame 100 is ideally suited for all flame…

This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

The mobile handheld laboratory gas burner powerjet 2 - The solution for all flame sterilization work in the microbiology or biotechnical fields. The burner is lit as soon as the bar is pressed. The flame can be regulated in size and is extinguished by release of the bar. Additionally…

Used to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.

Gasprofi 1 SCS micro - Series: Safety and comfort in the smallest possible space. Optimal for all flame-related applications in the laboratory. Simply safe to operate Depending on the model, the Gasprofi 1 SCS micro - Series can be operated with touch free IR-Sensor, button function or…

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Power supply (used for Argos StarFire ST burner)

Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections.  *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners.…

Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …

When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer. Mounted on a die casted zinc alloy base. Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer and is threaded into a die casted zinc alloy…

The Bunsen Burner can be used with natural gas or cylinder propane gas. The burner has a knob that allows you to adjust the height of the flame and a sturdy cast iron base that provides stability.

The Tirril Burner for Small-Scale Burning Test (ASTM D5025) supports the following standards: ASTM D5025 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Supplied complete with…

Micro Bunsen Burner, LPG - StabiliBase Anti-Tip Design The micro Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with an air flow adjustment sleeve. The total height of the burner is its best…

Natural Gas with Flame Stabilizer Tirril Bunsen Burner

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Premium Meker Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN The Meker Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion. This burner produces a…