Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks.

Erlenmeyer flask with a standard taper outer joint. For stoppers see CG-3000.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. For Larger Flasks See CG-1524.

22- or 18-gage platinum wire gauze U-Shaped Carrier is 12 x 12 mm with a 3 mm space between sides. The 20-gage wire stem forms into loop for hanging on stopper hook in Thomas-Schoniger flask. Heavy-gage sample carrier is similar to 1233S50 Sample Carrier but with heavier 18-gage wire.

Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.

6513C60 stopper was traditionally offered by Thomas for 300/500 mL combustion flasks; glass tip extends 50 mm below ground joint 6513C65 stopper is used for 1,000 mL combustion flasks; glass tip extends 90 mm below ground joint All feature U-shaped platinum gauze with 3 mm opening for insertion…

Low actinic red stained glass provides protection to light sensitive solutions. Allowing less than 1% transmission below 400nm and 5% from 400-600nm. Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large…

Blanks for fabrication of single or multi-neck round bottom flasks.  NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.

European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. With standard taper outer joints on center and side necks.

Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass, and a microcarrier style impeller with glass shaft that extends through the cap and PTFE paddle. Flasks are typically used with a circulating water bath.…

MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two angled sidearms…

Heavy Wall blanks are 30% heavier than our standard CG-618 series. Blanks are used in the fabrication of single or multi-neck round bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.

2800mL flask with 3 baffles on the lower outside edge of the flask to help oxygen transfer to the culture medium.

Single neck, flat bottom flask with a standard taper outer joint.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and vertical side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.

Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.

Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw…

SYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

Micro round bottom 3-neck flask with all 14/10 threaded outer joints. Supplied complete with open-top screw caps (MW-102-33) and Viton O-rings (MW-100-08).

For use with turbidity meter or nephelometer Scratch and striation free side tube Available with or without cleanout port Autoclavable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements 38-430 top cap and 20-415 sidearm cap have white styrene…

With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C

The Celltreat 75 sq-cm tissue culture flask contains a stable hydrophilic surface that ensures uniform cell attachment. Zip closure bag keeps the contents of the bag safe and secure by preventing any leakages. The large canted neck gives smooth access to the entire flask surface. Thick durable…

Durable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A plastic snap cap is included. Meets Class A specifications per ASTM E-288. Batch Certified. Our volumetric flasks feature QR code integration to facilitate quick and easy…

TriForest Erlenmeyer Shaker Flasks are manufactured with virgin, optically clear, non leaching LEXAN® Polycarbonate resin that retains clarity after gamma radiation. The flasks are certified pyrogen free, DNase/RNase free, ideal for cell cultures, microbial cultures, plants, media preparation,…

Polypropylene flasks are molded in one piece to withstand full vacuum to 30" Hg Oval marking area Autoclavable Tubulation at 45° angle prevents tipping. Barbed adapter accepts 1/4" to 3/8" I. D. tubing

Disposable flasks feature wide, easily accessible mouths Optically clear polycarbonate Baffled and non-baffled bottoms available Sterile and certified non-pyrogenic Fernbach design 4907K36, 4907K49, 4907K30, and 4907K48 are certified RNase- and DNase-free Designed for…

With Cell Suspension Stirrer, Celstir® Entire flask assembly can be autoclaved Offered in six sizes, working capacities 25 to 1,000 mL Easy access through side arms Of Wheaton “200” borosilicate glass Cylindrical with screw neck and polypropylene cap …

For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.

These borosilicate glass reaction vessels are jacketed with 1/2" hose connectors. They have four indentations for improved stirring and a tooled flat flange with an O-ring groove for a greaseless seal.

Single long neck flask with a Standard Taper outer joint Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Round bottom Short ring neck These PYREX® round bottom boiling flasks have short ring necks. These ring neck boiling flasks are precisely tooled for uniform stopper fit. The reinforced rim increases mechanical strength. These flasks are used in applications requiring rigid stoppering…

Overflow measuring flasks are a simple and very precise way to conform to fixed volume instructions. They are available in different sizes for different measuring ranges with the respective sample volumes.