These knee-length lab coats are made of easy care 100% cotton fabric. Coats feature one upper left breast pocket, two roomy lower pockets, and side slit openings. Coats are manufactured with a vibrant tie dye pattern.

Student optical bench contains sufficient equipment for high school physics applications. Set includes the following: 1 Meter Stick, 1 Screen support, 2 Lens Supports for 38mm and 75mm lenses/mirrors, 5 Board screens measuring 10 x 12.5cm with a millimeter scale on both sides, 1 Marker and object,…

Multipurpose Polypropylene molded trays can be used for sterilizing, drying glassware, porcelain ware, and other laboratory supplies. These steam autoclavable trays have tapered walls designed for nesting.

Pack of 12 stirring rods. Rods are made of soft flint glass, with both ends fire-polished and rounded.

Color-reaction or spot plates, glazed except for bottom surface. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Every batch of porcelain is heat tested in our factory. Glaze - No…

For covering boiling solutions Fire-polished edges concave shape Can be used on funnels, dishes and jars

Made from high quality borosilicate glass, these autoclavable, flat, clear Petri dishes can withstand repeated sterilization and can be used many times. Each dish includes a lid. Note: Lid does not seal air tight.

This 13 x 100mm polystyrene test tube has a capacity of 7ml. Tube features a round bottom and includes a hollow top plug cap made of polypropylene. Sold as a pack of 100 tubes.

Polyethylene dropping pipettes are graduated, and can be easily rinsed and re-used. Offered in 1ml and 3ml sizes.

High precision interferometer with interchangeable optics for Michelson or Fabry-Perot setups. 200 MM precision geared lead screw for fine adjustment. This product has a 90 day lead time. Market standard for this type of product.

Protect against cross-contamination using these racked, sterile filter pipette tips. These universal tips are manufactured from polypropylene and the filters are manufactured from polyethylene with a hydrophobic design to prevent liquids and aerosols from entering the body of the micropipette.…

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors,…

This unique kit allows students to make a wide range of investigations with only a small number of items. The kit contains two sets of three metal cylinders - aluminum, copper, and steel. In one set the cylinders all have equal masses, and in the other they have equal volumes. The measuring…

7 dissecting instruments in a folding vinyl pouch 8 dissecting instruments in a folding vinyl pouch 10 dissecting instruments in a large trifold vinyl pouch 14 dissecting instruments in a zippered vinyl case

Sedimentary rocks are types of rocks that are forms by the deposition of materials on the Earth’s surface and within bodies of water. The set included: bituminous coal, breccia, chalk lumps, chert, diatomite, flint, laterite, lime stone black, lime stone siliceous, mud stone, rock phosphate,…

Our polypropylene one-piece measuring cylinders have raised graduations for easy readability. They are autoclavable and have excellent contact clarity. The hexagonal base provides excellent stability to the cylinder, and the tapered spout enables easy pouring of reagents. Stated tolerances are the…

Made from high-quality virgin polypropylene, these microcentrifuge tubes are RNase, DNase, and Pyrogen free for safer use in molecular biology and other biochemical applications. Include a connected snap cap, large molded-in graduations, and a frosted surface for easier writing. Autoclavable tubes…

Gooch crucibles have a perforated bottom and include lids. Crucibles are glazed on inner and outer surfaces except for the outside bottom and rim. Used for determination of total suspended solids. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56…

Designed to fit onto the top of our star and round base cryogenic vial closures. Provide quick visual indentification of specific vials for ease in organizing inventory. Compatible with all of our cryo vials except P60102 and P60103 skirted base cryo vials.

This electroscope is housed in a 250ml borosilicate glass flask with a metal rod attached to a rubber stopper. A pair of aluminum leaves is suspended from an alligator clip. The knob on top of the rubber stopper accepts a charge. When the charge enters the flask, the aluminum leaves separate. Also…

Impact-resistant and built to last, United Scientific REUZ™ (“re-use”) beakers are made of 304 Stainless Steel. The corrosion-resistant stainless construction includes rolled top rims, smooth edges and radiused corners for easy, thorough cleaning. These beakers do not contain graduation markings -…

Pre-cleaned borosilicate glass test tubes without rims. Tubes can be used for hot or cold applications, are reusable, and can be autoclaved.

These bottles are made of translucent and low density polyethylene (LDPE). Solutions can be dispensed easily by lightly squeezing the bottle. The flexible polyethylene delivery tube can be directed wherever required.

Liebig condensers are used to cool and condense hot vapor as part of a distilling apparatus. This condenser has a straight inner tube that the condensing vapor passes through, and a larger outer jacket that cooling water passes through. Socket is 24/40

These amber boston round flint glass bottles include screw cap with dropper assembly are designed for general use. The glass is non-porous, which allows for easy cleaning or autoclaving. The amber color helps protect light sensitive materials.

Cylinders comply with ASTM E1272, Class A standards, batch certified. Double metric scale, calibrated to contain. Borosilicate glass cylinders with pour spouts feature heavy uniform wall tubing and strong, stable, hexagonal bases. All cylinders come with bumper guards.

Set of six of our most popular spoons and spatulas for the laboratory includes one each: 4" blad mounted on a hardwood handle, microspoon with Plastic Handle, Stainless Steel 6" Spatula (one end flat, one end spoon), 6" Stainless Steel Spatula (one end bent, one end flat), 6" Stainless Steel…

Set of 6 3-D manipulatives for demonstrating normal faulting, reverse (thrust) faulting and horizontal faulting. Set is provided with an access code to download interactive Teacher and Student Guides, videos, geoinformation data sets, and other resource information.

The Earth acts like it has a huge bar magnet located at its center. This set contains a globe that is 110 mm wide with a magnet contained along its axis. The magnaprobe contains a small magnet that is allowed to rotate on two axes. This set illustrates the path of the magnetic field…

This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

Our Variable Volume Micropipettes feature built-in tip ejectors and autoclavable tip cones. They work on a click stop digital system, are easy to calibrate and maintain, and easy to disassemble for autoclaving. Manufactured in an ISO 9001:2008 certified facility, these pipettes are highly accurate.…