Thermo Scientific Nalgene
-
Amber Wide Mouth Polyethylene Bottles
Thermo Scientific NalgenePigmented to provide protection for light-sensitive materials Nalge 2106 series Amber HDPE Screw cap Leakproof Complies with U.S. Pharmacopoeia 23 requirements for maximum light transmission
-
Standard Capacity, Wide Mouth Polypropylene Bottles
Thermo Scientific NalgeneStandard capacity Nalge 2105 series Autoclavable Rigid and translucent walls Includes polypropylene screw caps Leakproof Excellent chemical resistance
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
Polypropylene Carboys With Spigots
Thermo Scientific NalgeneNalge 2319 series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only…
-
Closed-Dome Polypropylene Tanks
Thermo Scientific NalgeneStore, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks, designed for use as closed containment systems. Offered in sizes ranging from 75 to 380L , tanks featurea a 150mm neck opening fitted with a gasketed closure for secure sealing. …
-
Autoclavable Polypropylene Utility Trays
Thermo Scientific NalgeneHeavy-duty for repeated autoclaving of small instruments and labware With tapered sides, rounded corners and strong rims Stackable
-
Plastic Funnels, Polypropylene
Thermo Scientific NalgeneFor standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable
-
Filling / Venting Closure With 1/4 Inch Fittings PP 83B
Thermo Scientific NalgeneThermo Scientific™ Nalgene Filling/Venting Closures are aseptic handling solutions for pharmaceutical, biotechnology and laboratory liquid transfer applications. For use with Nalgene bottles and carboys with 83B closures, including pre-mounted lengths of platinum-cured silicone tubing…
-
Autoclavable Ungraduated Round Bottom Centrifuge Tubes
Thermo Scientific Nalgene2602F40 is translucent Usable to 50,000 x g in refrigerated or non-refrigerated centrifuges *2610D22 and D30 with lip
-
Polypropylene Wide Mouth Jars
Thermo Scientific NalgeneNalge 2118 Polypropylene with polypropylene screw closure. Translucent jars are repeatedly autoclavable, with excellent chemical resistance.
-
Wide Mouth HDPE Large Bottles
Thermo Scientific NalgeneHigh density polyethylene Nalge 2120 series Large capacity Leakproof Durable Weighs up to 50% less than same size glass containers For dry materials or water sampling, high-density bottles have size 100 mm polypropylene screw cap. The bottles come individually…
-
Oak Ridge™ Centrifuge Tubes with Screw Closure
Thermo Scientific NalgeneWithstand up to 50,000 x g in refrigerated or non-refrigerated centrifuges. Before autoclaving, just set closure on top of the tube without engaging the threads. Must be filled to 80% of the total capacity. With polypropylene screw closure.
-
Coex Polyethylene Film Tank Liners
Thermo Scientific NalgeneEnhance mixing capabilities with open-bag, flat-bottom liners. Thermo Scientific™ Nalgene™ Coex Polyethylene Film Tank Liners offer cost-effective, single-use biopharmaceutical and diagnostic reagent fluid processing with rigid Nalgene cylindrical plastic tanks. Coex Polyethylene film…
-
Nalgene™ Stackable Drawer
Thermo Scientific NalgeneCreate high-density storage with the Thermo Scientific™ Nalgene™ all-purpose stackable drawer. These drawers nest, and can be mounted under a shelf or cabinet with provided screws.
-
Erlenmeyer Flasks For General Laboratory Use
Thermo Scientific NalgeneHeavy-walled, unbreakable in normal use Polypropylene has excellent chemical resistance and withstands continuous service at 130°C Autoclavable 2,000 mL flasks have molded-in graduations Stopper size: 50 mL flask No.1; 125 mL flask No.3; 250 mL flask No.6; 500 mL flasks No.7; 1,000 mL flask,…
-
Wash Bottles, Autoclavable
Thermo Scientific NalgeneAutoclavable, leakproof Nalge 2405 Made of contact-clear polypropylene copolymer with polypropylene screw cap and stem Stem and cap are molded in one-piece 9765N80 wash bottle takes cap number 28. 9765N90 wash bottle takes cap number 38.
-
4-In-1 EZ Tote Bottle Carrier
Thermo Scientific NalgeneEasily carry multiple bottles from the stockroom to the lab Easy to assemble, stores flat Versatile tote carries 500 ml, 1L or 4L bottles Strong, durable and lightweight plastic With a capacity of 28 pounds, this folding tote is perfect for safely and easily carrying bottles…
-
Replacement Spigots for Nalgene 2318 Series
Thermo Scientific Nalgene1753C67 is a standard spigot for carboys (Nalge 6422) 1753D30 spigot is needle type for tanks (Nalge 6421) Both are polypropylene with thread size 1 1/8” - 12 female screw thread Includes removable tubing adapter for smaller tubing; fits sizes (1/4” or 5/16” i.d.) 5/8”…
-
Nalgene™ FEP Separatory Funnels with Closure
Thermo Scientific NalgeneFunnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…
-
Low Particulate/Low Metals Bottles
Thermo Scientific NalgeneTeflon FEP Tefzel ETFE Screw Closure Narrow-mouth bottles with a particle level of less than 20 particles per ml at 0.3µm and greater Each bottle is double bagged under Class 10 laminar flow hoods inside a Class 100 clean room Excellent for storing high-purity chemicals …
-
Acrylic Plastic Petri Dish Racks
Thermo Scientific NalgeneProvide full side visibility for checking culture during incubation Lightweight and easy to load; provide safe transport Break-resistant PC posts screw in easily 3497A30 and A32 Racks are closed top, permitting inversion when loaded
-
Polypropylene Carboys with 1.5" Sanitary Flanges
Thermo Scientific NalgeneUse the Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with 1.5" Sanitary Flanges as dispensing ports or with secure hookup for supply reservoirs to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in…
-
LDPE Wide Mouth Carboys
Thermo Scientific NalgeneNalge 2234 series Lower-density bottles have molded handles and polypropylene screw cap Size 100 Walls are rigid and opaque Leakproof Neck i.d. 3 1/2 inches Graduated to contain in 1-gallon and 5-liter increments Dimensions: 10 liter carboys measure 13 3/4” high x 9 7/8” o.d.;…
-
HDPE Pans
Thermo Scientific NalgeneSoak labware or form ice baths using Thermo Scientific™ Nalgene™ HDPE Pans. These pans are tapered for nesting and are chemically resistant to most acids, bases and alcohols. Without covers Rugged and durable, tapered for nesting Molded-in handles and rolled edges for easy…
-
Polymethylpentene Wide Mouth Jars
Thermo Scientific NalgeneNalge 2117 Autoclavable jars offer glass-like clarity with good chemical resistance Polymethylpentene with polypropylene screw cap Straight sides Excellent museum jars; formaldehyde loss is only ≈2% a year 125 and 250 mL sizes have Mason jar threads and are useable with Osterizer…
-
Bubble Point Test Apparatus
Thermo Scientific NalgeneEnsure product integrity of Thermo Scientific™ Nalgene™ MF75 Series Filter Unit or Bottle Top Filters by using the Nalgene™ Bubble Point Test Apparatus. Tests filter unit membranes without removing the membrane from the filter unit. Cast aluminum Tests the bubble point…
-
Polymethylpentene Beakers
Thermo Scientific NalgenePlastic, with glass-like clarity, strong and impact-resistant Low form with spout Autoclavable Usable continuously to 150°C, intermittently to 175°C Excellent chemical resistance, although attacked by powerful oxidizing agents and affected by prolonged exposure to hydrocarbons, ethers, etc.…
-
Carboy Heavy Duty PP w / Handles 20L
Thermo Scientific NalgeneThermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …
-
Oak Ridge™ Centrifuge Tubes with Sealing Cap
Thermo Scientific NalgenePolypropylene co-polymer provides greater chemical resistance than polycarbonate and can be autoclaved repeatedly. Contact-clear tubes allow easy view of contents. Can be used up to 50,000 x g in refrigerated or non-refrigerated centrifuges with sealing cap closure option. Before autoclaving, just…
-
Oak Ridge™ Centrifuge Tubes
Thermo Scientific NalgeneIdeal for high-speed centrifugation of aggressive chemicals. Excellent for chloroform and phenol extractions. Resists any acid, base or solvent. Autoclavable tubes withstand temperatures from -100°C to +150°C. For use in refrigerated and non-refrigerated centrifuges up to 50,000 x g. Before…
-
General Storage Cryogenic Vials
Thermo Scientific NalgeneEconomical, non-sterile without printing or graduations Deep-skirted screw closure design minimizes risk of contamination Self-standing without a holder; conical bottom allows complete sample retrieval Externally-threaded polypropylene vials and high-density polyethylene closures minimize…
-
Safety Waste Systems
Thermo Scientific NalgeneIdeal for temporary waste containment Easy-snap safety latch on lid Lid/vent system reduces volatile emissions Wide mouth funnels for easy pouring Safer than glass HDPE and PTFE material construction resists most common lab solvents, acids and bases. Removable neck screen…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)