Kemtech America
-
SYNTHWARE All Glass Vacuum/Inert Gas Manifolds
Kemtech AmericaWith 4mm double oblique, high vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels. Distance between stopcocks is 75mm center…
-
SYNTHWARE Hollow Glass Penny-Head Stoppers
Kemtech AmericaPenny-Head Stopper, Glass, Hollow, Synthware, Various Joint Sizes Available, heavy wall design.
-
SYNTHWARE Round Bottom Angled Four Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Hickman Still Head, with Side Port
Kemtech AmericaHickman Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE Large Volume Vacuum Traps
Kemtech AmericaVacuum Trap, Large Volume Capacity: 500 and 1000mL available.
-
SYNTHWARE Microscale Reflux Solvent Still
Kemtech AmericaReflux Solvent Still, Microscale, Synthware, Capacity: 25mL, Joints: 14/20, Stopcock Bore: 2mm.
-
SYNTHWARE Transfer/Storage Flasks
Kemtech AmericaSYNTHWARE transfer/storage flask for long term storage of deoxygenated solvent. Recovery of solvent is done thru the valve body using a cannula or syringe.
-
SYNTHWARE Vacuum Trap
Kemtech AmericaFor use with vacuum manifolds having 35/20 socket joints. Please order the pump adapter and socket clamp separately.
-
SYNTHWARE PTFE-Faced Septum
Kemtech AmericaSeptum, PTFE-faced, Synthware, Multiple Sizes Available, for use with side port on Hickman still head.
-
SYNTHWARE Polypropylene Boxes
Kemtech AmericaStorage Box, Adjustable Compartments, Synthware, Polypropylene, for storage of 14/10 microscale kit components.
-
SYNTHWARE Glass High Vacuum Stopcocks, 90 Degree
Kemtech AmericaStopcock, High Vacuum, 90 Degree, Synthware, Multiple bore and plug sizes available, Stem OD: 8, 10 and 12mm available, with hollow glass plug, Precision ground with corresponding numbers on the barrel and plug.
-
Addition Funnel, Pressure Equalizing, High Vacuum Valve, Synthware, Capacity: 25-250mL available, Joints: 14/20, 19/22 or 24/40 available, Valve Size: 0-4mm, Valve has extended tip for semi-needle valve adjustment.
-
SYNTHWARE Septum Stoppers, Sleeve Type
Kemtech AmericaSleeve Type Septum Stopper made from natural white rubber.
-
SYNTHWARE Microscale Distillation Head
Kemtech AmericaWith 2mm glass stopcock and 24/40 joint. Supplied with a special 25mL long-neck flask for small volume efficiency.
-
SYNTHWARE Distillation Cow Receiver
Kemtech AmericaDesigned for microscale application. With one female joint and four drip-tip male joints.
-
-
SYNTHWARE Sublimation Apparatus
Kemtech AmericaSublimation Apparatus, Synthware, Capacity: 100 or 150mL available, Flange Size: 57 or 80mm available, supplied complete with condenser, flask, O-ring and horseshoe clamp.
-
SYNTHWARE Diagonal Rotary Evaporator Condenser
Kemtech AmericaDouble coil condenser for use with Buchi rotary evaporators for cooling with tap water in a diagonal position. A 19/38 top valve. With 35/20 spherical ball joint.
-
SYNTHWARE Glass T-Bore Stopcock Plugs
Kemtech AmericaReplacement Stopcock Plug, T-Bore, Glass, Synthware, Multiple Bore and plug sizes available, solid glass plug.
-
Synthware Connecting Adapters
Kemtech AmericaSynthware combination adapting connector with a top spherical socket joint and a lower standard taper inner joint.
-
SYNTHWARE High Vacuum Valve Plugs
Kemtech AmericaHigh Vacuum Valve Plug, PTFE Protected, Synthware, Size: 0-4, 0-8 or 0-12mm available, Plug has a machined in PTFE tip O-ring to make the primary seal.
-
Synthware Vacuum/Inert Gas Adapters
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the standard taper inner joint.
-
SYNTHWARE Vacuum Traps, Hose Connections
Kemtech AmericaVacuum Trap, Hose Connections Available in multiple sizes with various joint sizes, diameter, length, and inner/side tube size.
-
SYNTHWARE Plug Retention Kits
Kemtech AmericaPlug Retention Kit, Stopcock, Synthware, Stainless Steel, Multiple Plug Sizes Available.
-
Synthware Vacuum Take-Off Adapters
Kemtech AmericaSynthware vacuum take-off adapter with drip tip. The upper outer and lower inner standard taper joints are the same size.
-
Microscope Cover Glass, Borosilicate 3.3
Kemtech AmericaKemtech America Cover Glass in Boro 3.3. Cover Glass available many dimensions and come in either 1mm or 1.5mm thickness. Individually wrapped by Aluminum vacumm pack with desiccant.
-
SYNTHWARE Separatory Funnels with Standard Taper Joint
Kemtech AmericaSeparatory Funnel, Standard Taper Joint Capacity: 10-250mL Available Joints: 14/20, 19/22, and 24/40 available PTFE Stopcock Bore: 2mm Supplied with PTFE stopcock and PTFE or glass penny-head stopper
-
TLC Cylindrical Developing Tanks
Kemtech AmericaAll glass cylindrical TLC developing chambers that will accommodate 25 x 75mm to 50 x 200mm TLC plates. The compact design offers good plate visability and minimal solvent use. Lid has a short length standard taper joint with a ball style handle.
-
SYNTHWARE Modified Schlenk Flasks with Glass Stopcocks
Kemtech AmericaSYNTHWARE modified Schlenk flask with a standard taper outer joint and 2mm bore glass stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.
-
SYNTHWARE Air Reflux Condenser with 14/20 Joint
Kemtech AmericaAir Reflux Condensor, Synthware, Joints: 14/20, Overall Length: 143mm, Length Between Joints: 96mm.
-
SYNTHWARE Conical Reaction Vials
Kemtech AmericaConical Reaction Vial, Synthware, Capacity: 3, 5, and 8mL available, Joint: 14/20.
-
SYNTHWARE Round Bottom Two Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.