The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

For flasks, resin kettles, etc. Constructed of aluminum exterior for extreme durability Form fitting for even heat distribution Internal operating temperature limit of 450°C. Usable with a splash guard or poncho shield for increased safety and life. Certified by Canadian…

No sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…

Medium Duty, Model HST10 Totally enclosed, 1/17 hp, permanent magnet DC motor Direct-drive, with rpm/torque readout and X-Y output Maximum rpm: 2,500 Torque: 1.5 lbs.-in. (1.73 kg-cm) Direct drive provides 20 to 2,500 rpm and 1.5 lb.-in. torque. Available for 120 or 240 V, 50/60 Hz…

Shaker holder for 500 mL Erlenmeyer flask. The Erlenmeyer flask holder will hold a single flask Mid-Range shaker holds up to four

The Glas-Col flask holder is a laboratory equipment used while conducting wide range of experiments. It is suitable for use in research facilities and chemical laboratories. It features reliable and sturdy construction which ensures durability.

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

Splash guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

These supports are adjustable in height to provide convenient locations of series M mantles. If a drain container is necessary, one side of the leg brace may be easily removed to accommodate it. The adjustable legs are self-storing when not in use.

The series TM spherical flask mantle covers only the flask's bottom half, letting you see its full contents. Larger sizes have multiple circuits for ease of temperature control when a flask is less than half full. Splash Guards can be used with TM102 through TM117. Poncho Safety Shields can be used…

Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

Versatile, user-friendly shakers that offer reciprocating shaking and mixing for many hours with bench top convenience. Variable speed motor controller - mixing action from gentle, low speed shaking to vigorous, high speed shaking Compact - can fit inside a fume hood for added safety …

The Series TM Resin Reaction Flask mantle provides even heat distribution to prevent scorching of clear resinous material. One-circuit heat input simplifies temperature control.

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

This timed control turns the output load on and off and then repeats the cycle. Each position on the knob from LO to HI represents a specific cycle time where the on time ranges from 6 to 100 percent. For example the LO setting represents a total cycle of approximately 60 seconds with an on time of…

Holders for Large Separatory Funnels or Flasks From the upright or fill position, the funnel may be rotated to the 45° or 60° position for shaking and then returned to the upright position for the addition of materials or extracting. The flask may remain in the holder for the entire…

Griffin beaker heaters Maximum internal temperature 450°C Resilient and pliable interior, which cradles fragile beakers Heat is concentrated at the bottom, so even small liquid volumes can be heated Glass cloth mantle conforms to shape of beaker for even application of heat Controller…

This tube holder lets you use the Bench-Top Shaker for Mojonnier fat extraction. Each holder accepts up to four flasks, 37 mm in diameter.Maximum of two holders can be shaken at one time. The load max of up to five pounds (2.27 kg) need not be balanced. Unstoppered flasks may be shaken vertically.…

The series O Erlenmeyer and filter flask mantles help prevent thermal strain on unusually susceptible heavy-walled vessels.

Made of cast iron aluminum, these lab clamps are ideal for many applications on the bench or latticework. Heavy-duty 90 degree clamp designed to be more user friendly Larger knobs make hand tightening easier and provide sufficient pressure to hold rods securely Can be used on…

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

The Series M mantle is the most compact mantle with an aluminum shell that can heat flasks up to 72 liters. Like the Series TM, this mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Only the bottom of the…

Continuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…

Horseshoe-base laboratory stand with 11/16 (17mm) diameter stainless steel mast. Accepts containers up to 9" (229mm) diameter. Designed for durability, these lab stands are designed for the lab bench

This series O spherical mantle covers both the top and bottom of 1-, 2-, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask.

With a patented Glas-Col Snorkel Stopper, you'll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it…

Vigorously shakes large funnels Capacity is 80 lbs. The 3D floor shaker eliminates the time consuming and tiring manual shaking of large vessels. The 3D motion circulates liquids up, down, sideways and around making this shaker useful for hemolyzing blood, water pollution analysis or…

These supports are adjustable in height to provide convenient locations of series M mantles. If a drain container is necessary, one side of the leg brace may be easily removed to accommodate it. The adjustable legs are self-storing when not in use.

This series O spherical mantle covers both the top and bottom of 1-, 2-, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask.

User friendly microprocessor-based ramping control Microprocessor based PID control Ramp-rate or time-based programming profiles 24 Step program capability Program looping Guaranteed soak (dwell) deviation Auto tuning function allows automatic setting of control…

Splash guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

Conveniently rotates a large number of Erlenmeyer flasks at once. Attaches with ease to any Rugged Rotator base.