Heats odd lengths of glass tubes and metal pipes Ribbon-type heating elements running lengthwise in the tape are encased in a durable glass braid and are impregnated and covered withtough silicone rubber Silicone rubber insulate stranded terminal leads at one end and waterproof fittings…

The Flexible homogenizer drive allows up-and-down motion of rotating pestle in a stationary tube that can be mounted in ice or controlled-temperature bath. Application: Accepts the Adjustable Chucks Furnished with the Motor Drives as Well as the L11 Quick-Change Chuck and the L14 and L15 Flex-Grip Chucks

In both permanent and temporary applications, this tape heats odd lengths of glass tubes and metal pipes. Ribbon-type heating elements running lengthwise in the tape are encased in durable glass braid and are impregnated and covered with tough silicone rubber, which insulates stranded terminal…

The mantle is used extensively in analytical work and in purification of research products with only small samples available. In sizes for spherical flasks 5 to 35mL and pear-shaped flasks 5-250mL. Certification: All 115 volt units are CSA certified. Electrical: Separable 3-ft.,…

The series O Buchner funnel mantle provides gentle heat for solutions that must be filtered while warm.

These funnel mantles allow extraction of fluids while hot, preventing solidification of viscous material in cold stopcocks. The thickness of the fiberglass fabric between heating elements and soft glass wall of the separatory funnel prevents thermal strain and the resultant cracking. Viewing is…

This heating mantle can heat metal beakers safely and efficiently. Inner glass-fabric ayers prevent contact of heating elements and vessel walls. The mantle is designed for straight-walled, flat bottom vessels.

The ideal, no-hassle way to prevent unwanted heat transfer in the lab Three different InsulEze kits can be used alone or in combination to insulate almost any laboratory configuration Can be used as a heat shield, a cold shield, for insulating over heaters, as a shock absorber, as a…

Heating mantles are preferred over Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series STM mantle for applications needing more heat. Aluminum Housed Mantles Feature: …

This series O mantle is a hemispherical style, meaning it covers only the bottom half of the flask. This allows full view of the flask contents. The mantle accommodates single- and multi-neck flasks.

The series O Buchner funnel mantle provides gentle heat for solutions that must be filtered while warm.

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

No sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…

Flask Holder lets you shake one to four Erlenmeyer flasks at a time. It will work with uncapped flasks (for gentle shaking), or you can close them with screw caps or tapered stoppers. An elastic band automatically holds the stoppers in place. One or two flask holders can be shaken at once. A…

Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full…

This funnel mantle reduces viscosity and prevents precipitation of solutions that must be kept warm during transfer.

Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used…

Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

Nutating Separatory Funnel 3D Shaker Our nutating shakers combine the functionalities of a vigorous laboratory shaker with an added circular rocking motion. The result is that samples are shaken while also being oscillated around a central axis - this means that agitation of the…

Thorough mixing action Variable speed control Speed range of 2-80 rpm Dry Powder Rotator has the drive bar set at a 20° angle so the motion of the rotator closely reproduces the mixing action achieved when mixing by hand, making it useful for working with hard-to-mix powders. Not only is the…

Designed to meet mixing requirements for varying viscosities and volumes Feedback circuitry to maintain speed when viscosity changes Reference circuitry to maintain speed even with voltage fluctuations of ±10% Cord connections between drive motors and controls Stirrers filter the drive…

Heavy cast iron base accommodates containers up to 406 mm diameter Nickel-plated rod is 762 mm long x 19 mm diameter With tapped holes in base, 1/2-13 U.S. National Coarse thread, for use of additional rods such as 8835C24 and C36.

The Glas-Col over-temp probe monitor is a laboratory equipment used while conducting wide range of experiments. It is suitable for use in research facilities and chemical laboratories. It features sturdy and reliable construction which ensures durability.

Controls two separate circuits independently Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Use on bench top or mount to lattice work using clamp provided on back panel Will…

Griffin beaker heaters Maximum internal temperature 450°C Resilient and pliable interior, which cradles fragile beakers Heat is concentrated at the bottom, so even small liquid volumes can be heated Glass cloth mantle conforms to shape of beaker for even application of heat Controller…

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

Shaker holder for 1000 mL Erlenmeyer flask. The Erlenmeyer flask holder will hold a single flask Mid-Range shaker holds up to four

This series O spherical mantle covers both the top and bottom of 1-, 2-, or 3-neck spherical flasks for improved safety and efficiency. The circumferential zipper holds the halves snugly together to prevent heat loss, and the side split in top allows removal without disturbing the flask.

Splash guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

Smooth rotation and repeatability Totally enclosed motors Variable speed motor drives are designed to make the homogenizing process faster, safer and more thorough. These variable-speed drives feature totally enclosed motors. For high-speed operations, the direct drive shaft is…

Glass-Col offers its standard series TM mantle for round-bottom flasks with the PowrTrol power control as a special, economical package. The PowrTrol is a solid-state, proportional-voltage control that provides precise manual control of the output range, which is adjustable from 5-100%. The…

Heating Mantles/Stirrers in Self-Standing Metal Case Eliminates need for mantles with holes or very thin insulation that will accommodate separate stirring devices The optional EMC-4 StirControl II (Thomas number 5912M10) creates and synchronizes a rotating magnetic field within the StirMantle…