Borosilicate glass transition adapter to convert beaded pipe 2 to standard taper joint.

Lab stand support shelf fits any stand with up to 5/8"od rod. Stand measures 7 x 10" and is available with or without 4" rubber-bordered center hole. Manufactued from light, cast aluminum and epoxy coated. Rod mounted codes -04 & -06 feature a 5/8in OD x 12in long stainless rod with a through hole…

Glass standard taper and spherical joint adapters featuring right angle tee ground glass sidearms. The sidearms are used to make tube compression fitting connections to a wide variety of flexible and rigid tubing using our 12709,12711,12715 & 12716 product families of fittings.

Erlenmeyer flask with standard taper joint.

Trypsinizing flask for converting of homogenous tissue samples into cell suspensions by digestion of connective tissue. Side port has dam below the side arm to prevent undigested tissue from being poured out while decanting cells. Flask has GPI thread top and side arm cap. The three extra deep,…

Smith Buret for dispensing precise quantities of liquids. The wide base adds stability when placed on a balance pan. Complete apparatus consists of a flask, buret and cap stopper. With a 19/10 cap type stopper joint as illustrated, and a standard taper

PTFE agitator with removable blade secured with a PTFE pin. Supplied 3.2x15.2cm blade will fit through a 45/50 joint. Fits 19mm od drilled type or knob type 8076, 8078 & 8079 shafts.

Self-aligning, three-piece bearing. Complete consists of inner Trubore bearing, Nylon bushing with O-Ring, and threaded adapter. Unique design eliminates costly replacement since inner bearing will spin if shaft binds or will self-align at O-Ring seal in the event the motor is slightly cocked.…

Useful for supporting column, flasks, dishes, etc. Shaped with internal bevel.

With 25 mm fritted disc diameter. 40/35 for all sizes. All porosities of a given size are priced the same. Inlet/outlet arms are 8 mm O.D.

Medium length joints, top and bottom, that will accept full length joints. When inserted into flask, splash guard combines with flask neck to give best protection against pot splash up. Overall height is kept to a minimum to effect best distillation.

Erlenmeyer flask, heavy wall, with a standard taper joint.

Specially designed, standardized flasks, with stoppers. All capacities have 12/18 joint with approximately 10 mm opening. Cylindrical body affords better mixing and drainage, and ease of withdrawal using pipets. Wide base offers greater stability. Uppe

Round bottom, three neck flask. Side necks are angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance. Microscale flasks, codes -34 & -36, feature 14/10, 20-400 externally threaded cap-seal joints supplied with 14.7-15mm holed caps, PTFE faced…

Complete fast-freeze flask with snap-on rubber cap and 1/2-inch or 3/4-inch O.D. plain or valve adapter, compatible with all major brand freeze drying manifold valves. Borosilicate flasks are designed for ease of handling, faster loading. Uniform wall weight maximizes heat transfer while…

Space saving, Elliptical shaped, bump trap. For use in Rotary Evaps between the steam tube and the evaporator flask. Prevents fluid from being drawn into the condenser. Shape allows for the same effect as standard traps but with less space between the flask and evaporator tube. This allows for use…

Heavy wall, bottle shaped, filtering flask with removable polypropylene hose connection. Offered plain or plastic coated. Order 6989-40 for replacement hose connection assembly consisting of PBT hose connection, EPDM o-ring, VMQ silicone seal, PP screw

Used for filtration of solvents and collection of precipitate. With two standard taper 14/20 or 24/25 outer joints and two standard taper 14/35 or 24/40 inner. With fritted disc.

Used for pouring liquids or powders into multineck flasks. Available with standard taper joint.

PTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.

The Dounce type, glass tissue grinder is supplied with two glass pestles; one with a tight inner tolernace and one with a loose inner tolernace. The loose pestle can be used for initial reduction of the tissue sample and the tight pestle can be used to fine grind the tissue and complete the homogenation.

Dual purpose flask features the TWISTLOR ACE-Seal: simply push adapter head and flask together, turn 90 degrees. Flange on flask has two ground-flats opposite each other that allow Nylon retainers on adapter head to pass over. O-Ring positioned in head

Bulb style condenser with drip-tip bottom joint. Provides high efficiencies in a compact size.

Precision Trubore Stirrer Assembly consisting of 10 mm ID bearing, bushing, precision ground, button type glass shaft and blade. Available with either glass or PTFE stir blade.

Repeat cycle timer control, bench top or bar mountable, for regulating reflux ratio on distillation heads. Supplied with removable side bar for mounting to 1/2in rod. Minimum and maximum on/off range: 0.1 to 6000 seconds. Available in 120v. 24 month limited warranty.

For sulphur absorption chamber, after Edgar and Callingaert. Diameter of disc 30mm, height above disc 200mm, capacity 130mL. Will fit a No. 7 rubber stopper.

Vacuum, improved form. Material to be dried is placed in the inner tube, 15.2cm long by 25.4mm I.D. When the liquid in the distilling flask boils, the vapors pass through the drying chamber and heat the inner tube at a constant temperature. The vapors then ascend to the reflux condenser, condense…

Conical 4" (10.2 cm) neck for use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks. Supplied with three outer joints in line, plus a thermometer side arm which is internally threaded for use with 5029 Nylon B

Standard taper outer ground joints with external thread for making an O-RING-CAP SEAL connection with mating 7608 inner joint. Used in fabricating ACE Microscale Glassware. Joints not supplied with cap or O-Ring, see 9590 and 7855.

Designed for small chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose…

Two sizes, both featuring an O-Ring sealed, greaseless flange with 6517 Quick Release Clamp. Top flange is ground flat, bottom mating flange has an O-Ring groove for a CAPFE O-Ring (PTFE encapsulated silicone), held tightly together via a quick release clamp. Size 60 is 200mm high x 60mm I.D.; uses…

Conical 4" neck with three socket joints in line, plus a 14/35 outer joint for thermometer. Use 6496 Clamp for securing to flasks. For use with 6475, 6476, 6477, 6479, 6480, 6481, 6491, 6492, 6497, 6498 and 9656 ACE Reaction Flasks.