0.5, 1.5, and 2.0ml screw cap vials molded from high precision mold and high purity resin. Screw caps deliver leak-proof seal for all types of contents, ideal for life science reagent or solution. All vials are available in skirted and conical interiors to allow full recovery of samples stored.…

* Tube contains garnet matrix and one 1/4" ceramic sphere * Used to grind animal and plant tissues, insects, nematodes and lyse bacteria, yeast, fungi, algae * For use on MP Bio FastPrep instruments or any bead beater Lysing Matrix A 2 mL tube from MP Bio contains garnet matrix and…

Designed for safety Available in standard red or blue tip Tubes are wrapped in multiple layers of clear Mylar plastic to help avoid accidental breakage. The Mylar wrap helps to contain the sample if the tube fractures, inside or outside the centrifuge. Chance of contamination due to…

Non-sterile, precision molded, round bottom test tubes for general purpose laboratory work Polystyrene tubes provide clarity and are appropriate for use with mild acidic (except oxidizing acids) or alkali solutions, alcohols (except higher alcohols) and salt.

Ace Glass pressure tubes are the premier glass pressure vessels in the industry. our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breakage under pressure. Observe all laboratory safety procedures including working behind a shield.

These Nessler tubes are ideal for color comparison and feature cap style stoppers that do not need to be removed to take readings. Shadowless bottom of each tube transmits undistorted light Standard Taper cap style stopper Replacement cap is 15182 (3058L93 & 3058L98) 3058K65 is…

Test Parameters PeroxySafe MSA; PeroxySafe STD; AciSafe MSA; FaSafe STD; AldeSafe STD; AldeSafe MSA; AlkalSafe STD

Ace Glass pressure tubes are the premier glass pressure vessels in the industry. our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breakage under pressure. Observe all laboratory safety procedures including working behind a shield.

The straight-style drying tubes have a small stem which is approximately 6mm in diameter, a body that is approximately 14mm in diameter, and a bulb is 26mm in diameter. They are available in three lengths. The U-shaped style drying tubes have a tube that is 14mm in diameter and are available…

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

Made from quartz. Used as reaction or sample tube in 7891 Turntable Reactor.

Foam plugs for all size test tubes and laboratory flasks Identi-Plugs® are for use with test tubes and flasks. They are reusable and leave no clinging fibers like cotton plugs. They provide a snug fit, yet permit free air flow. Plugs are ideal for use with Drosophila vials. They spring…

Ace Glass pressure tubes are the premier glass pressure tubes in the world, rated at 150 psig at 120 degrees C. Featuring a #7 Ace-Thred sample port, these tubes offer the convenience of sampling while remaining connected to the researcher's apparatus. Due to varying conditions, Ace cannot…

Heavy wall with lip for crown cap closure. Approximately 100mL capacity, 38mm O.D. x 17.8cm long.

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

The FastDNA SPIN Kit for Soil is designed to isolate bacterial, fungal, plant, and animal genomic DNA from soil and other environmental samples. Soil is processed by a FastPrep instrument and Lysing Matrix E tubes designed to efficiently lyse all microorganisms. The released DNA is purified by a…

These multipurpose screw cap test tubes are offered in convenient sizes to suit a variety of applications. The screw caps are designed to be leak-tight allowing the tubes to be used for storage or transport.

Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

Thistle Tube - Glass 7mm OD stem with Bulb top. Available in the following stem lengths: 150, 300, 400mm

These borosilicate glass Schlenk sample tubes incorporate a grease-free high vacuum 0-4mm valve and are suited for pressure/vacuum applications. Ideal for reaction and storage of air-sensitive compounds. Sidearm can be connected to inert atmosphere/vacuum source or a manifold.

These Nessler tubes are ideal for color comparison. Shadowless bottom of each tube transmits undistorted light Rings and legend are durable white ceramic enamel 45310A series is supplied in matched sets of 6 Graduated ring scale of any of the six tubes will not vary by more than 3…

This borosilicate glass test tube has a round bottom and a Standard Taper outer joint. See LG-10300 and LG-10310 for stoppers.

This 12 x 75mm polypropylene test tube has a capacity of 5ml Tube features a round bottom and is autoclavable Sold as a pack of 100 tubes

The Glass Double Thistle Tube has funnel opening on both ends, 7mm OD stem and is 300mm in length.

These tubes are designed for use with Teledyne Tekmar 2016/2032 Autosamplers and 4100/4200 Automatic Samplers that are equipped with 3/4” diameter mounts. The opening of these disposable tubes is larger and it permits easier sample loading and facilitates the weighing of solid and…

The Precision Systems glass sample tube is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of high quality material which ensures long lasting usage. It is easy to handle and convenient to use.

KIMAX-51 tube made from N-51A borosilicate glass tubing with a sturdy lip and uniform wall thickness for maximum heat transfer and chemical resistance. Tube is without a marking spot.

Borosilicate Glass. Available with and without base. With and without graduations.

These Nessler tubes are ideal for color comparison. Shadowless bottom of each tube transmits undistorted light Rings and legend are durable white ceramic enamel which correspond with specific volumes of liquid 45315A series is supplied in a matched set of 6 Graduated ring scale of…

Lysing Matrix B 2 mL tubes have blue caps and contain 0.1 mm silica spheres. Used primarily for lysis of gram positive and negative bacteria. Will also disrupt fungal tissue and spores. For use on FastPrep instruments or any bead-beating device.

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes

For culture tubes and flasks with DeLong®-style necks and ports Molded pressure fins for firm grip Manufactured from non-toxic, autoclavable polypropylene Seven colors for easy identification Six sizes