Durable square bottles made from high-density polyethylene (HDPE) with low-density polyethylene (LDPE) screw caps. V94189 is made of LDPE and has a polypropylene (PP) screw cap.

Ideal for general laboratory use including mixing, storing or transporting culture media, chemicals or solvents Enhanced graduations Wide mouth with pour ring Completely autoclavable Polypropylene caps included Extra-wide opening for ease of filling, dispensing, pipetting …

Borosilicate 3.3 hybex glass Autoclavable caps (GL45) & drip rings Permanent enamel graduation markings Large area for bottle marking/identification Autoclavable, reusable and breakage resistant Five cap colors hybex™ reusable media bottles are manufactured from…

Heavy-duty, reusable bottles Wide opening for easy access Polypropylene pour rings included The RAY-SORB® process provides a shield to protect light sensitive products. Less than 1% transmission below 400 nm and reduced (5%) from 400-600 nm as compared to untreated, clear,…

Designed for use with 14395 series bottles and 26720 series flasks. Pour rings are made of clear drip-free polypropylene or red ETFE 14395E-452 high temperature ring is recommended for use with 14395H-452 high temperature cap

The BD middle brook OADC enrichment is developed specifically for the cultivation of a wide range of microorganisms from the derivatives of clinical and non-clinical specimens. It comes in a ready-to-use petri dish that prevents sticking of bacteria on the surface.

Polypropylene Reagent Bottles with Screw Caps Rugged, slope-shouldered bottles are made of polypropylene with polypropylene screw caps. They provide excellent chemical resistance to alcohols, aldehydes, aliphatic hydrocarbons, bases and many acids. Linerless caps have an internal sealing ring.

Foxx Life Sciences offers an exclusive line of EZBio® Single Use Bottle Assemblies available in Polyethylene Terephthalate Glycol-modified (PETG) and Polycarbonate (PC). Made with USP Class VI components and Gamma Irradiated in the U.S., these bottle assemblies come with tubing and vent filters…

Heavy wall glass storage bottles with #15 Ace-Thred are intended only for storage of low-boiling liquids at room temps or at not less than -20°deg;C. Designed to resist internal pressures up to 100 psi, as low as -20°deg;C. The low pressure rating based primarily on the rating for PTFE…

1230K91 - 1230K96: Black phenolic screw caps With 14B rubber liner Autoclavable Ideal for culture work 1230L89 - 1230L94: Tear-off unlined aluminum seals This seal can be completely removed and contents readily poured from bottle

Wheaton PETG Square / Octagonal Media Bottles are made of Eastman Tritan Eastar Copolyester PETG which is the resin of choice for single use labware and medical devices. This resin meets ISO 10993 and / or USP Class VI biocompatibility requirements and is Food Contact Status compliant. The PETG is…

Polypropylene (PP) slope-shouldered reagent bottles with PP stoppers. Bottle V100894 includes handle.

Rugged, autoclavable centrifuge tube boxes can be used at temperatures of -90°C to 121°C. Racks hold 36 each 15ml tubes, or 16 each 50ml tubes, and feature a clear lid for easy identification of contents.

Low-density polyethylene (LDPE) bottles with polypropylene (PP) screw caps.

Style: Straight Sided Round Bottle Size: 91 x 96mm Color: Clear Material: Glass Qty: 12 Attached Cap: Black PP Cap & PTFE Disc Capacity/Volume: 16oz (480ml)

KimCote® plastic-coated bottle has enhanced graduations and marking spot is permanent white enamel. This general use bottle is provided with a wide opening (approx. 30 mm ID) GL 45 screw thread and is supplied with linerless autoclavable (121 ºC max) polypropylene blue cap. Bottle design includes a…

Manufactured from borosilicate glass which provides the best chemical resistance Graduations and marking patch assists in measuring volume and identifying content Special pour lip facilitates pouring Packaged in partitioned carton to help prevent scratch marks on bottles

Clear, square disposable polyethylene terephthalate (PET) bottles are space-saving and convenient to handle Clear, square polyethylene terephthalate (PET) bottles Ideal for mixing, sampling and storage in environments ranging from -40° to 50°C Raised graduations Neck ID: 29…

Slope-shouldered polypropylene (PP) reagent bottles with PP Screw Caps.

With 24mm O.D. drain extension near bottom for attaching stopcock shutoff valve. Shutoff is an 8mm bore PTFE plug stopcock with a #25 Ace-Thred at a right angle. Ace-Thred attaches to drain extension via a 7506-10 Nylon Bushing and FETFE O-Ring. The 9.

Three-neck, made of heavy wall glass with standard taper 24/40 joints.

HDPE container with white LDPE-lined Polypropylene Cap Caps assembled onto containers Narrow mouth for precision pouring Recommended for collecting water samples and other low viscous liquids Sturdy handle for easy transport and pouring Unprocessed container comes assembled and ready…

Wheaton PETG Square / Octagonal Media Bottles are made of Eastman Tritan Eastar Copolyester PETG which is the resin of choice for single use labware and medical devices. This resin meets ISO 10993 and / or USP Class VI biocompatibility requirements and is Food Contact Status compliant. The PETG is…

Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone

Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone

Manufactured from borosilicate glass which provides the best chemical resistance Special pour lip facilitates pouring Packaged in partitioned carton to help prevent scratch marks on bottles

Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone

Plastisol coating for safety USP Type I clear borosilicate glass Provided with graduations and writing patch 33-430 screw cap can be purchased separately Autoclavable

Stainless Steel Port Assemblies are designed for use with Media Storage Bottles for adding & withdrawing media. 3 Port models feature siphon, fill and vent tubes and is supplied with a 45mm Polypropylene blue open top screw cap & white silicone

LDPE Bottles with Screw Caps Round-shouldered low density polyethylene bottles have polypropylene screw caps, and are suitable for storage of many acids, bases, aldehydes and alcohols. Linerless caps have an internal sealing ring for a positive seal.