STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

mdi PVDF membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

Minisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for…

Increased throughput and speed of sample preparation Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples. Strict quality control: Syringe filters are…

mdi PTFE membrane Syringe filters type SYTG incorporate a PTFE membrane with a multi-layered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC…

Finneran 13mm Syringe Filters with glass fiber membranes are available in 1.0um, 2.0um and 5.0um pore sizes. Glass fiber membranes have fast filtration flow, elminate sample contamination and have good chemical compatibility. Finneran syringe filters are autoclavable.

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), allowing you to…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and…

A 33 mm diameter sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. 33 mm Millex filter units provide greater throughput than the 25 mm units Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than…

Syringe filters for convenient filtration of small sample sizes through membranes. PTFE membranes are permanently hydrophobic and resistant to solvents, acids, and bases.

New ergonomic design - the most comfortable pipettor you ever laid a hand on New power source for uninterrupted extended operation - can be charged while in use New ultra quiet precision pump - great control for aspiration or dispensing The new Drummond Pipet-Aid XP2 advances the…

mdi PES membrane Syringe filters type SYKG incorporate a PES membrane filter with a multilayered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. The microglassfiber prefilter provides excellent protection to the final membrane filter due to its high retention…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively…

Quick and efficient filtration of samples and all kind of solutions, solvents or gases Housing injected in Polypropylene or Acrylic Multifunctional Syringe Filters: equipped with luer-lock or luer-slip male connections for different applications Sterilized or non-sterile Available in…

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 25 mm syringe filter is recommended for filtering 10–100 milliliter (mL) volumes to remove particles prior to…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use…

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

mdi microglassfiber syringe filters are specially designed for clarification of extremely viscous samples that may clog a membrane filter. These filters have microglassfiber media encased in a polypropylene housing. All mdi Syringe Filters are color coded for ease of identification and offer a…

A syringe filter generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter. We offer three filter diameters: 15mm, 25mm and 30mm with membranes made of the following materials: RC…

mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they…

CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a…

Minisart Plus: Fast, sterile filtration of high particulate liquids. Surfactant-Free Cellulose Acetate membrane (SFCA) and binder-free glass fiber (GF) depth pre-filter.

3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

Finneran 25mm Glass Fiber Automatic Filters are suitable for manual and automated filtrations. Ideal for sample volumes up to 10mL. Autoclavable.

A 33 mm diameter sterile syringe filter with a 0.1 µm pore size hydrophilic PVDF membrane. Designed for sterilizing protein solutions, tissue culture media, buffers and additives Feature a Millipore Durapore® PVDF membrane and are the lowest protein-binding syringe filters…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …

Minisart GF: Binder-free glass fiber depth filter for clarification of liquids heavily laden with coarse particles; or may be used as a prefilter for 0.2 µm or 0.45 µm Minisarts.

Minisart NY25 Plus: Rapid small volume filtration and sterilization of solvent-based samples and difficult to filter aqueous solutions. NY25 X Plus includes a ployamide (Nylon) memrane with a binder- free glass fiber depth pre-filter.