2nd Generation Ultravap® Levante - The intuitive, automation-ready sample evaporator for microplates & tubes.    Robot-compatible  Increase rate of sample dry down with evaporation temperature of 80 degrees C - reducing drying times by up to 50%  Color…

The MiniVap® Gemini Sample Concentrator is a two-position nitrogen blowdown concentrator and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design…

The Aquilon cold trap is a device that condenses vapor into a liquid or solid (ice). The main purpose is to prevent vapors from entering the vacuum pump, where they would condense, contaminate vacuum pump oils and can cause corrosion. Whilst doing this task the cold trap further prevents vacuum…

Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

RE801 is a highly functional and programmable rotary evaporators which are standard equipped with motorized lift, vacuum regulator, vapor temperature display functions and automatic distillation function. Features One touch electric lift for easy up and down movement Automatic…

Economy type, easy to use rotary evaporator with manual lift, analog control and a 4L or 7L water bath. Features Speed can be changed freely with the control knob Option for 3 different kinds of glassware Option for 4L or 7L capacity water bath Rotary joint’s locking…

The Ai SolventVap series rotary evaporators come with a modular heating bath, vertical glassware, and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely…

The BUCHI accessory is suitable for use with Rotavapor® or Multivapor™ evaporator unit models or with Sepacore® flash system models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

The MiniVap® is designed for low usage R&D departments where low numbers of individual plates or vials need drying. The MiniVap® is easy to operate and maintain. Can be used with any ANSI/SLAS 96-well plate. Compact footprint - fits all standard fume cupboards.

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

The Buchi SVL 15 seal is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe, sold as 5 per set.

RE601 is a highly functional and programmable rotary evaporators which are standard equipped with motorized lift, vacuum regulator, vapor temperature display functions and automatic distillation function. Features One touch electric lift for easy up and down movement Digital…

The Yamato receiving flask of 5 Liters capacity, is suitable for use with RE-71 large scale rotary evaporator model.

2nd Generation UltraVap® Mistral - a automation compatible blowdown evaporator.  Fully liquid handling robot-compatible dry down station  Hotter than ever - Increase rate of sample dry down with new evaporation temperature of 80 degrees C - reducing drying times by up to…

Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

20L Rotary Evaporator, 3 ph Chiller Complete, turnkey 20L Industrial-S Rotary Evaporator optimized for industrial ethanol recovery. 20L Distimatic Automatic Control Distimatic Control Module for Heidolph 20L Rotary Evaporator's allows continuous, unattended evaporation…

1230D81 - Buchi R-210 Rotavapor Vapor Duct, 29/32 for A-Condenser. Prevents cross-contamination and is particularly easy to dismantle and clean. The vacuum seal is manufactured from PTFE composite material and provides long service life with effective sealing. 1230D82 - Buchi R-210…

Two heating baths are available for the Rotavapor R-210 and R-215. With a heating capacity of 1300 W, they provide enough energy for a fast distillation. The mayor differences between the bath B-491 and B-495 are the bath size and temperature range. The B-491 can be used as a water and oil bath up…

The Buchi foam detector is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-250 and R-250 EX. This detector helps in minimizing the moisture content in the device.

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. A number of different autosamplers have been used with Agilent AA,…

The Buchi type s condenser assembly comes with a cooling coil and a cold trap and is used with Multivapor™ evaporators. The combination of plastic and glass coating provides added strength.

The Buchi seal holder is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe.

The newly developed product line from IKA® in ergonomic, compact design with innovative functions to improve operating results. Rotary evaporators with integrated heating bath HB 10 basic (3 litre) inc. space saving vertical glassware (1 litre). Heating bath with adjustable safety…

The Buchi vacuum seal is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe.

1229D81 - Buchi V-850/855 Vacuum Controller Valve combined with condensate trap and non-return valve with attachment for Rotavapor (not necessary with V-700/710 in stand-alone systems). 1229D82 - Buchi RC-81 remote control can be used to control the vacuum controller and the Rotavapor:…

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. This mini-rotary evaporator is designed with slide jack mechanism for…