Ideal for identification of vials, plastic bags and other containers for long-term storage and color coding in deep-freezing and harsh laboratory environments. Temperature range from -196°C to +110°C

Cryogenic plastic labels for long-term storage in deep-freeze harsh environments for biomedical research and clinical laboratories. Temperature range from -80?°C to +120?°C. Resistant to autoclave and boiling water. Cryo labels accept desktop laser printing and permanent marker.…

Label Size: 0.875" x 0.875" (22mm x 22mm) Ideal Use: Microscope Slides Sheet Layout: 8 across - 12 down Labels/Sheet: 96 Colors: White, Blue, Green, Orange, Red, Yellow or "Rainbow Pack" U of M: 2,400/pack Rainbow Pack: Includes 5…

Durable Freezerbondz® Polyester (B-492) markers are designed for laboratory identification applications such as vials, centrifuge, tubes, test tubes, straws and slides. Can be applied to frozen surfaces including glass and polypropylene stored in liquid nitrogen. Good print smudge resistance,…

BMP®61 Series ribbon cartridges allow users to change ribbons in seconds. One-color ribbon for printing a single color onto a label. R6400 Series Resin Formulation offers superior chemical and abrasion resistance when printed on the appropriate label material from Brady®. Recommended for use with…

DYMO® compatible paper labels for regular use (non-cryogenic) at ambient temperatures.

High adhesion and high pliability are the hallmarks of Brady’s nylon cloth (B-499) label material designed to meet a broad array of identification requirements from control panels to liquid nitrogen environments. Application Versatility – Highly pliable material conforms tightly to curved surfaces…

The strong, permanent adhesive on these labels withstands cold storage temperatures and maintains adhesion to glass, plastic, cardboard and more, even in liquid nitrogen. Organize and label samples for short or long-term cold storage Ideal for -80°C to -196°C environments Dot…

The BradyPrinter i5100 Industrial Label Printer provides the fundamental printing capabilities for the high-mix and high-volume work you need to get done every day. Change printer settings easily with the intuitive touchscreen. Complete label set up faster with Intelligent Print (IP) technology…

Super chemical-resistant polyester (B-481) is designed for use in the slide staining process and other laboratory ID which requires superior chemical resistance. Performs well in the commonly used H&E (hematoxilin and eosin) slide staining process. Excellent resistance to a wide variety of…

White, in continuous 500-inch (12.7-m) rolls imprinted with red-bordered rectangles, width x length indicated below 6260K10 provides 300 labels; 6260K15 provides 200 labels. Without dispenser.

Cryo-Lazr-Tag™ labels come in a sheet format for printing with desktop laser printers. The plastic waterproof labels are specifically designed to permanently adhere to vials, microtubes, microplates, glass tubes, freezer boxes, plastic bags and other containers that will undergo long-term…

Waterproof cryogenic plastic labels for direct-thermal barcode printers. Can be printed without ink ribbons. Can be used for long-term liquid nitrogen and freezer storage.

Get your ideal label printing scenario with the BradyPrinter i3300 Industrial Label Printer – labels and ribbons that snap into place, no calibration and no wasted blank labels. Mid-volume industrial label printer ideal for identification throughout your facility, including everything from wires…

Cryogenic plastic labels for long-term storage in liquid nitrogen and deep-freezing harsh environments for biomedical research and clinical laboratories. Cryo labels accept desktop laser printing and permanent marker. Water-resistant; Wear and tear proof; Do not jam printers; Resistant to UV and…

Cryogenic plastic labels for long-term storage in liquid nitrogen and deep-freezing harsh environments for biomedical research and clinical laboratories. Cryo labels accept desktop laser printing and permanent marker. Water-resistant; Wear and tear proof; Do not jam printers; Resistant to UV and…

Self-Laminating Polyester (B-461) is a clear film with a matte white printable zone ideal for cables, laboratory ID or general labeling where graphics need to be protected. Good smudge resistance, solvent resistance and high/low-temperature performance. Service temperature of -320 to 230° F (-196…

Deep-freeze thermal-transfer labels for identification of vials, tubes, freezer boxes, plastic bags (at -196°C in liquid phase and vapor phase Liquid Nitrogen, and -80°C freezers) and other containers. Designed for long-term biopreservation in laboratory deep-freeze and harsh environments.…

This B-403 material completely dissolves in warm water within 30 seconds, leaving no adhesive residue behind. Material may be used with the Brady Material Dispenser with Liner Remover for simple labeling tasks. Ideal for use in laboratory settings, asset tracking or general use. Easy to remove,…

Direct Thermal Cryo-Tags® are formatted to easily work with the Dymo® Labelwriter®, but also work with most direct thermal printers. Quickly label your samples with sharp text, clear barcodes or a combination of both! TEMPERATURE-RESISTANT - From -196°C to 70°C and also…

Cryo-Tags from -196°C to 80°C For Use with Thermal Transfer Printers Unique solvent-resistant, acrylic-based adhesive provides excellent cold temperature performance Specially coated for use with a resin ribbon that provides the best performance under extreme conditions …

"The Choice is Clear!" Our patented Cryo-Clear™ Laser Labels withstand conventional and cryogenic storage conditions (vapor and liquid phase nitrogen storage at -196°C). The labels are chemically inert with a solvent resistant acrylic adhesive that will adhere to all…

Nev’s Ink, Inc. Brand cryogenic storage labels offer adhesive that is designed to withstand extreme cold temperatures from -196° C (-311°F).  Labels can be printed on and will not bleed.  Offered in an array of sizes and colors on rolls or laser sheets.  Perfect for…

Make labels that withstand up to 10 years of outdoor abuse with this low-shrink vinyl label material (B-595). Print almost anywhere with a durable Brady handheld label maker. Versatile — Ideal for labeling pipes, equipment, shelves and other industrial surfaces. Tough — Designed to withstand…

These stock shipping, caution and handling labels draws the attention to your valued shipments. Featuring, a permanent adhesive for an aggressive adhesion to corrugated boxes, stretch film and mailers. Caution and handling labels help packages arrive safely. 500 LABELS PER ROLL - 3” CORE.

I-CHEM Environmental sample labels are designed to make sample handling and identification more efficient in the field and laboratory. Each label is color-coded with preservation type for quick reference. White labels are available to create a customized labels to suit your particular field or lab needs.

Label Size: 1.28” x 0.50” with 0.375” spot (33 x 13 mm with 9.5 mm spot) Use: 1.5 mL tubes Sheet Layout: 4 sets across x 17 sets down Labels/sheet: 68 sets

Sheet Size: 8.50" x 11" (216mm x 279mm) Ideal Use: Cut to size Colors: White U of M: 25 sheets/pack

Deep-Freeze plastic rectangle labels designed for 0.2ml PCR tubes. Can be inscribed with permanent markers or printed in laser printers. Temperature range from -196°C to +120°C. Withstand liquid nitrogen, deep freezing, boiling water and autoclaving. Resistant to multiple freeze-thaw cycles…

Label curved frozen lab surfaces including tubes, vials and cryocanes with the ultra-thin B-492 polyester label material. Print almost anywhere with a durable Brady handheld label maker. Specialized — Ideal for laboratory use on curved surfaces including test tubes, vials and straw pipettes.…