Burets, Cannabis
-
Automatic Zero Acrylic Burets
Thermo Scientific NalgeneNalge 3640 Safe and easy-to-use Includes reservoir bottle with screw cap, 0.9 meter of PVC tubing and dust cap Similar to 1985R15 series, but automatic zero type with low-density polyethylene squeeze bottle reservoir connected to side filling tube by PVC tubing.
-
For use in educational laboratories where Class A accuracy is unnecessary Made from uniform bore tubing, with red graduations which are permanently fused onto the glass and remain sharply legible Straight glass tip stopcock with 2 mm bore Teflon stopcock plug; supplied with plastic dust cover
-
The titrating burette with splinter protection is a fast acting burette with Schellbach stripes based on Dr. Schilling's design with automatic zero point extraction and Bürkle dosing armature.The glass burette has a plastic sheathing which increases resistance to breaking and protects…
-
Class B Accuracy Acrylic Burets
Thermo Scientific NalgeneSafer and more break-resistant than glass Clear plastic with black markings, individually calibrated Polymethylpentene stopcock and tip; stopcock plug Teflon ® , 2 mm bore Resistant to dilute acids and bases, except hydrofluoric acid and ammonium hydroxide; not for use with alcohol…
-
Automatic Titrating Burette
BürkleBurette with Schellbach stripes type Schilling / Bürkle with original Bürkle dosing armature. A universal aid in the laboratory, electroplating industry, water treatment plants, for field analyses, etc. Precise dosing using the press button, exact fine titration with the micro-screw and…
-
LaMotte Automatic Burets
LaMotteAutomatic self-zeroing glass buret insures non-contamination Constructed of glass, 305 mm long With offset dispensing tip Graduated 0 to 10 mL in 0.1 mL increments Self-zeroing; overflow is returned to reservoir 2002A01 (LaMotte 0847) and A06 (LaMotte 0996) burets include 50 mL plastic…
-
PYREX® 25mL Buret with White Enamel Markings, with Dual Rotaflo® Stopcocks
-
Burettes, PTFE Screwthread
United Scientific SuppliesBurettes with Screw Thread (PTFE) stopcocks are made from the highest quality, accurate bore tubing to provide a high degree of accuracy, reliability, and durability. Accuracy per Class "A", ASTM E-287. Meets USP Standards, Serialized and Certified, Blue Graduations.
-
PYREX Class A Burets
CorningPrecision bore tubing assures uniform accuracy between any two points on the scale With Standard Taper 2 straight glass stopcock Supplied with plastic dust cap Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taperstopcock gives precise…
-
Precision bore tubing is used these 25mL Class A PYREX® burets to assure accuracy between any two points. Durable colored graduations are sharply defined and easy to read. Carefully ground Standard Taper stopcock gives precise control. All sizes furnished with a 2mm bore stopcock plug. For…
-
KIMAX Class B Automatic Zero Burets With Reservoir
DWK Life Sciences (Kimble)Class B accuracy With filling tube and overflow tube Kimax®, with 3-way PTFE stopcock overflow cups and refill tube. Filling is through stopcock. Overflow tube at the top of the buret that accepts 1/4” i.d. flexible tubing. Buret is self-zeroing style. Stopcock for all sizes is…
-
KIMAX Class A Serialized and Certified Automatic Zero Burets with PTFE Stopcocks…
DWK Life Sciences (Kimble)KIMAX® precision bore automatic burets are used in applications requiring the highest degree of precision and accuracy for volumetric analysis. These are ideal for repeat titrations requiring traceable volumetric accuracy or when the titrant should not be handled. Packed complete with a…
-
Ground Glass Flask Stopper Amber
Vee Gee ScientificThe Sibata Glass Stopper is lightweight yet very strong to reduce chipping and breakage. It meets ASTM E-675 specifications.
-
KIMAX Dispensing Burets With Straight-Bore PTFE Stopcock
DWK Life Sciences (Kimble)Scale is durable white ceramic enamel Plain top 1988K10 has 1 mL subdivisions and a tolerance of ±2.0 mL. Dimensions: 36 mm o.d. x 544 mm L. 1988K20 has 5 mL subdivisions and a tolerance of 2.5 mL. Dimensions: 43 mm o.d. x 646 mm L. 1988K30 has 10 mL subdivisions and a tolerance of 10 mL.…
-
Discharge Tube Unit
HirschmannThe Hirschmann discharge tube unit is suitable for use with dispensers, which are used in research facilities and chemical laboratories. It is made of high quality material which ensures durability and long lasting usage.
-
ValueWare® Burets, Straight Bore, Class B
DWK Life Sciences (Kimble)Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…
-
Burette with Ground Glass Stopcock, 10ml
GSC International, Inc.These glass burettes have a straight bore, a ground glass stopcock, and permanent graduations. Class A. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive…
-
Ammonia Dissociation Buret
SP Wilmad-LabGlassGraduated from 10 to 90% in 1% subdivisions, this borosilicate glass buret is used to determine the degree of dissociation of ammonia during the nitriding of steel alloys. Buret is 100mL and reads the amount of ammonia absorbed. Stopcocks are glass and a Standard Taper 14/20 joint connects the…
-
Burettes with Straight Bore Ground Glass Stopcocks
GSC International, Inc.A straight bore glass stopcock burette with permanent and accurate graduation lines. Subdivided 0.1mL
-
KIMAX Straight-Bore Class B Burets
DWK Life Sciences (Kimble)With PTFE stopcock Includes plastic KIM-KAP® dust cap Scale is durable black ceramic enamel. Plain top. ASTM E287, Class B.
-
KIMAX Class A Micro Burets With Integral Reservoir
DWK Life Sciences (Kimble)Durable white ceramic enameled scale Side filling tube has separate Teflon stopcock to control liquid; tube is 5/16 inch o.d. Calibrated to the accuracy requirements found in ASTM specification E 694 Kimax precision bore buret has a side filling tube with a separate stopcock to control liquid…
-
Glass Buret
Vee Gee ScientificVEE GEE Scientific Class A Burets w/ PFTE Stopcocks meet ASTM E-287 Class A Specifications. Made from precision, uniform Schott DURAN® true-bore tubing to ensure the stipulated capacity tolerances. These burets (also known as burettes) feature durable, permanent markings, fine, sharp lines, and…
-
KIMAX Class A Serialized Micro Burets With 3-Way PTFE Stopcock
DWK Life Sciences (Kimble)Permanently marked with an individualized serial number Supplied with a Certificate of Graduation Accuracy Scale is durable white ceramic enamel Stopcock for both sizes is Ps 2. Filling is through stopcock; filling tube accepts 1/4” i.d. flexible tubing. 1990U10 has 0.01 mL subdivisions…
-
These PYREX® burets are suitable for use in school and institutional laboratories not requiring the accuracy of our Class A models. They are used when dispensing large volumes of liquids rapidly and accurately. Made from close tolerance, accurate bore tubing with uniform walls, these burets have a…
-
Burettes with PTFE Stopcocks
GSC International, Inc.A quality borosilicate glass burette with PTFE stopcock. The PTFE stopcock is almost freeze proof and does not require grease. Subdivided 0.1mL
-
Buret Titration Right Hand 50ml
DWK Life Sciences (Kimble)KIMAX® buret used in electrometric titration assemblies. Stopcock is set at a 55 degree angle to the center of the graduated scale Offset dispensing tip Burets have funnel tops Durable black ceramic enamel scale Manufactured from 33 expansion, low extractable borosilicate…
-
Precision Bore Class A Burettes with PTFE Stopcock
SP Wilmad-LabGlassMade of borosilicate glass, these precision type, Class A burets have a straight 2mm PTFE stopcock. Calibration is in compliance with ASTM E 694 specifications. Reference No. ASTM E 287 Laboratory Glass Graduated Burets
-
Automatic Burette, Glass, Class A, Individually Certified
United Scientific SuppliesSelf-zeroing burette is mounted on a glass bottle. Includes a PTFE needle valve stopcock, intermediate stopcock and rubber bellows. Class A, ASTM E-284, meets USP standards, individually serialized and certified. Includes Schellbach backing for easy reading of liquid levels. With amber graduations.…
-
Drying Tube
BrandTech®Drying Tube with sealing-ring for Dispensette/Digital Buret/Titrette. For use with: (Thomas Nos.) 1194M54, 1194M55, 1224B89, 1221V47, 1224B90 and 1221V48.
-
Buret, Smith Type, Weighing
Ace GlassSmith type for dispensing precise quantities of liquids. The wide base on the flask enables the operator to place the entire unit on the balance pan. Capacity of flask and buret is 10mL. Lower joint is 14/20.
-
Bel-Art Automatic Burets
SP Bel-ArtAutomatic self-zeroing glass buret ensures non-contamination Easy-to-read blue graduations against a white background 10 mL buret readable to 0.05 mL; other burets readable to 0.1 mL Delivery end fitted into plastic push-button stopcock permitting drop-by-drop delivery Small screw…
-
Burettes, PTFE Screwthread
United Scientific SuppliesBurettes with Screw Thread (PTFE) stopcocks are made from the highest quality, accurate bore tubing to provide a high degree of accuracy, reliability, and durability. All graduations are in resilient white enamel. Accuracy per Class "A", ASTM E-287, Batch Certified.