These lead weights can be coiled into a helix, spiral, cone or any irregular shape to stabilize vessels in a water bath. Flexible; versatile Coil around flasks, thread through handles or loop around bottle necks Coated with chemical resistant red Vikem® vinyl to protect glassware …

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Cylindrical with handling knob Supplied in high quality polycarbonate case with red insert …

This slotted weight set includes the following: One 500g brass slotted weight Two 200g brass slotted weight One 100g brass slotted weights One 50g brass slotted weight Two 20g brass slotted weights One 10g brass slotted weight One 50g hanger One weight rack PRODUCT…

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Flat with one end turned up for easy handling Supplied in high quality polycarbonate case with…

DURABLE & STURDY Made of high quality brass with a fine finish - Each weight is engraved to show the individual mass SLOTTED Masses are slotted allowing individual weights to be removed with ease ESSENTIAL An essential piece of equipment for many weight-bearing science…

UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

Stainless steel polished finish Designed to meet ASTM E617-13 specifications ASTM Class 0 weight sets and individual weights are not individually marked with their weight value or individually serialized per ASTM E617-13 Nominal value marked on weights Serial numbers applied to case…

UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

We sell several hooked weights that are different shapes and weights. All styles are designed so that they can be hung in tandem. They are sold individually. Weights include: #4-25007 : Hooked Brass Weight, 50g #4-25008 : Hooked Brass Weight, 100g #4-25010-CI : Hooked Cast-iron…

Screw knob style weights are ideal for most laboratory calibration applications Sizes from 1 mg to 100 g Two-piece polished stainless steel gram weights Five tolerance levels from Ultra Class SM to ASTM Class 4 Sets and individual weights available These standard…

Troemner Alloy 8 Stainless Steel Precision Metric Weights are available in Troemner UltraClass, and ANSI/ASTM E617 Classes 0, 1, 2, 3 and 4. Troemner Alloy 8 Stainless Steel Precision Avoirdupois Weights are available in ANSI/ASTM E617 Classes 1, 2, 3, and 4. ANSI/ASTM Class weights meet or exceed…

Primarily used to test commercial weighing devices by state and local weights and measures officials, device installers and service technicians. Class F weights may be used to test most accuracy Class III scales, all scales of Class IIIL or IIII, and scales not marked with a class designation. …

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

To get all the accuracy your electronic balance and/or scale provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose. Weights are available in a…

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

This slotted weight set includes the following: Ten 10g plastic slotted weights One 10g hanger PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, which are known to the State of California to cause cancer, birth defects, or other…

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

These weights are manufactured Troemner Alloy 8 Stainless Steel, which was developed by Troemner and is available exclusively through Troemner. This unique material possesses low magnetic susceptibility, uniform consistency and high resistance to corrosion. It is the finest grade of stainless steel…

Space saving rack Holds 5-8 rings 7.5” D x 6.75”H Autoclavable Simple rack for organizing and storing with minimum space requirements. Holds rings with a minimum I.D. of 0.7”. Circular base is 7.5” diameter and 6.75” high.  

UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

Perfectly Designed for any kind of Balance Testing ASTM precision weights, Best Price-Performance Ratio Low magnetic permeability and high corrosion resistance ensure reliable values. All weights are made with stainless steel, no aluminum is used even in milligram weights. Individual…

METTLER TOLEDO's world leading expertise in metrology extends to weights, weight sets and weight calibration services. The weight portfolio covers OIML weights from fifty micrograms to five tons in all accuracy classes. Our weights are used all over the world, not only for testing balances but also…

Thomas Scientific Calibration Weights are solid construction and made with non-magnetic stainless steel. OIML E2 can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.…

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. Sets are supplied in a rugged polypropylene case with a handle on top. Foam insert has compartments…

Class 4 For calibration of semi-analytical balances and for student use. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies that require traceability but do not need to meet any stringent regulatory requirements. The Traceable Weight…

These weights are manufactured Troemner Alloy 8 Stainless Steel, which was developed by Troemner and is available exclusively through Troemner. This unique material possesses low magnetic susceptibility, uniform consistency and high resistance to corrosion. It is the finest grade of stainless steel…

Perfect for stabilizing glassware and laboratory containers! Argos Technologies® lead ring weights are ideal for stabilizing glassware and laboratory containers during water immersion. The vinyl coating prevents scratching on labware or the benchtop. The "C" shaped rings have…

UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as…

Stabilize labware in water baths and on the benchtop Added security and accessibility For beakers and flasks Weighted holders allow beakers or flasks to be secured and placed into a water bath with full access to the vessel opening. The Vikem® vinyl coated lead ring has been…

Class 2 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01 g to 0.001 g.

These weights are manufactured Troemner Alloy 8 Stainless Steel, which was developed by Troemner and is available exclusively through Troemner. This unique material possesses low magnetic susceptibility, uniform consistency and high resistance to corrosion. It is the finest grade of stainless steel…