The Insta-Test Low Range Hydrogen Peroxide Test Strips is a convenient way to quickly measure peroxide levels in water with fast dip and read results. Range and sensitivity is 0, 1, 3, 10, 30, 50 ppm.   Applications: Drinking Water, Industrial Water Boiling and Cooling, Laundry…

Method: colorimetric with test strips and reagent 20 - 40 - 100 - 200 - 500 mg/l Pb MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C. The lead test is suitable in environmental analysis. Not only in all aqueous media but also…

Method: colorimetric with test strips 10 - 40 - 80 - 180 - 400 mg/l SO₃ 2- MQuant™ Storage class: 10 - 13 Other liquids and solids Storage: Store at +2°C to +8°C. The sulfite test is suitable for food analysis, particularly in the testing of wine and…

For determining trace levels of copper in water Octet Comparator has color standards representing 0, 0.05, 0.10, 0.15, 0.20, 0.30, 0.40 and 0.50 ppm Cu Sufficient for 50 tests

Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trizalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. …

Method: colorimetric with test strips and reagents 0.02 - 0.05 - 0.1 - 0.2 - 0.5 mg/l As 0.1 - 0.5 - 1.0 - 1.7 - 3.0 mg/l As MQuant™ UN Number: UN3316 Storage class: 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C. Hazard: Irritant;…

Octa-Slide Comparator Tests total iron after any ferric iron is reduced to ferrous in the sample Sufficient for 90 tests Ferrous and ferric iron may be tested separately by eliminating the reduction step. Octa-Slide has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0…

A method for measuring the color of potable water in terms of an easily reproducible color standard is essential to water engineers responsible for the distribution of supplies for public consumption. Color determinations are useful for detecting any irregular contamination of the supply due…

Caused by the presence of carbonates, bicarbonates, hydroxides, and other dissolved salts, alkalinity is important to drinking water, food, and beverage processors; boiler operators; and aquatic biologists. Contains 50 tests. Easy to use, disposable, and inexpensive A great way to obtain…

UN Number: UN3316

The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA. Features …

Drop Count Method For determining sulfite in water Employs modified APHA Method 428 One drop equals 5 ppm SO₃ Sufficient for 50 tests at 100 ppm

Insta-Test® strips are available to perform checks for water quality factors. Test strips are a quick way to monitor water without having to use reagents.

The DG Water Tests are accurate and sensitive water test kits for the detection and quantification of toxic chemicals in water. The kits are easy-to-use and cost effective. The DG Water Test Kits include: Sample Vials Developing Solution Color comparator Disposable Pipettes …

Reagents Chlorine is the most widely used disinfectant for drinking water and is also important for sanitizing swimming pools, cooling towers, other industrial equipment and treatment of wastewater. Its measurement and control are vital for both safety and economic reasons. Many Hach chlorine…

Chlorine dioxide is used as an oxidizing microbiocide in industrial cooling water treatment, the dairy industry, the meat industry, and many other food and beverage industry applications. It is used as a bleaching agent in the pulp and paper industry, and as a disinfectant in municipal water…

QUANTOFIX Chlorine Sensitive semi-quantitative test strips for the determination of total chlorine. Measuring range: 0-0.1-0.5-1-3-10 mg/L Cl2

3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…

Spectroquant ® Prove 300: a robust UV/VIS spectrophotometer for sensitive measurements, such as the analysis of drinking water and beverages.

The New Dual Range QAC Test Strip takes care of ALL of your testing needs on ONE STRIP! Whether checking the concentration of your QAC solution or checking to ensure complete removal from treated surfaces, the new Dual Range QAC Test Strip DOES IT ALL! Chemically-treated test strips change…

Sensafe® Low Range Peroxide Check is a break through in testing for Hydrogen Peroxide (H2O2). Utilizing ITS’ patented aperture technology, this strip allows for detection levels of 0.05, 0.3, 0.5, 1.0, 2.0, and 4.0 ppm, all in an easy dip and read procedure. Simply dip the patented…

QUANTOFIX Total acid semi-quantitative test strips for the determination of total acid content as expressed as g of citric acid. Measuring range: 2-2.5-3.0-3.5-4.0-5.0 g/L Citric acid

Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

QUANTOFIX QUAT semi-quantitative test strips for the rapid and reliable determination of quaternary ammonium compounds (QUAT) in solutions. Measuring range: 0-10-25-50-100-250- 500-1000 mg/L benzalkonium-chloride

The waterproof, Bluetooth ® ColorQ ® 2x PRO 7-PLUS Kit handheld professional pool photometer directly measures the seven primary tests of Free Chlorine (DPD), Total Chlorine (DPD), Bromine (DPD), pH, Alkalinity, Calcium Hardness, and Cyanuric Acid directly on a digital display. The…

7625 CAS Dropper Pipet Sufficient for 50 tests at 20 ppm 1 drop = 1.25 ppm HEDP 1 drop = 1.4 ppm PBTC Chromazurol S method may be used for Dequest, Bayhibit, Belcor 575 and Belsperse 161 phosphonates. Indicator changes from yellow to pink at the pH ideal for the reaction, then…

Direct Reading Titrator Method (9859A70 and A71) For determining total (T) alkalinity in water Range of 0 to 200 ppm as CaCO₃ in 4 ppm increments Employs APHA Method 403. Sufficient for 50 tests at 200 ppm. Direct Reading Titrator (9859B10) For determining phenolphthalein (P)…

All necessary reagents for the analysis are contained in the cells Considerate packaging design protects the cells from fluctuation even in unfavorable environment Elimination of possible mistakes through barcode-system

Sulfite is not usually present in surface waters. If sulfite is discharged in effluents or from domestic wastewaters, it readily oxidizes to form sulfate. Sodium sulfite is the most common form of sulfite and is an excellent reducing agent with applications as an oxygen scavenger. Sulfite…

The Micro Check Test Strips are an accurate, inexpensive and safe alternative for reagent chlorine testing. Quick, accurate and easy to use results are achieved in under 1 minute.  Free Chlorine with sensitivity as low as 0.05ppm (mg/L). Micro Check free, detection levels ppm (0, 0.1,…

Method: colorimetric with test strips and reagent 10 - 20 - 40 - 60 - 100 mg/l HCHO MQuant™ UN Number: UN3316 Storage class: 8B Non-combustible, corrosive hazardous materials Storage: Store at +2°C to +8°C. Hazard: Corrosive Formaldehyde is used as a…

This Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10…