Lab Tube Connectors & Adapters
Sealing caps stand out in this category for their ability to provide leak-proof closures, which are essential in preserving sample purity and preventing contamination. Compression fittings are excellent at offering robust and reliable connections that withstand the rigors of lab operations. These fittings are especially valuable in high-pressure applications, ensuring safety and consistency in results.
Tubing couplings and connectors further improve lab setups by facilitating quick and efficient tube connections. Their versatility makes them suitable for various laboratory configurations, including Y-tubing setups in chromatography.
These connectors and adapters, integral to lab tubing systems, significantly contribute to the accuracy and efficiency of laboratory procedures. Explore our lab tube connectors and adapters to discover how these small yet vital components can streamline your lab workflows and enhance experimental outcomes.
-
Quick Disconnect Tubing Couplings
Thermo Scientific NalgeneHigh-density polyethylene Friction-fitting members form a readily demountable joint for connecting flexible tubing Quick disconnect tubing couplings provide a safe, convenient means for rapid attachment and disconnection of filtering flasks, manometers, etc. Each member has a heavy flange for…
-
-
Shut-Off Valves with Fittings
IDEX Health & ScienceQuickly stop a flow stream Withstands pressures up to 500 psi!
-
Fits 5 sizes of tubing and will act as straight connector for the same size tubing on both ends, or will act as a reducer for any combination within the range. The inside diameter increases with notch size when needed length is cut off for unrestricted flow. These molded polypropylene connectors…
-
Angled Connectors
BürkleCylindrical angle hose connector to connect hoses. PVDF , Temperature resistant up to +160°C max., highly resistant to chemicals PP , Temperature resistant up to +135°C max. Sterilisable
-
Keep you operation running smoothly by keeping replacment parts handy Max pressure 6000 psi (414 bar) 10/PK
-
U-284 Column Coupler, Acetal/PEEK, 10-32 Coned
Cole-ParmerGreat for reducing overall flow path volume Couple two devices together Lessen volume of flow path 10-32 coned port connections 0.007" thru-hole 1.3 µL swept volume Acetal nut/PEEK ferrule Max pressure of 5000 psi (345 bar Column Couplers allow zero dead-volume…
-
Weld to single-use bags to transfer viscose fluids and powders. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system Free technical application support available to determine which connector type is needed for your application.…
-
Manufactured in an ISO Class 7 certified cleanroom to minimize contamination by pollutants. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system Free technical application support available to determine which connector type is needed for…
-
Scienceware® Complete Fitting Assortment
SP Bel-ArtStop wasting time hunting for the right tubing connection. This generous assortment of 72 plastic fittings has everything you need for routine laboratory set-ups. Clear, hinge-top, polystyrene storage box makes it easy to find what you need Includes commonly used sizes of connector and…
-
Cylindrical straight hose connectors for various hose sizes. PVDF , Temperature resistant up to +160°C max., highly resistant to chemicals PP , Temperature resistant up to +135°C max. Sterilisable
-
Nalgene™ Metric Non-Phthalate PVC Tubing
Thermo Scientific NalgeneThermo Scientific™ Nalgene™ Metric Non-Phthalate Clear Plastic PVC Tubing is manufactured from the highest-grade resin materials and performs like classic Nalgene 180 tubing but is free from orthophthalate DEHP plasticizers. Complies with FDA CFR21 for food packaging, USP VI,…
-
Sanitary Reducers
Carolina Components GroupFlowLinX Sanitary Reducer Fittings are designed for single use fluid transfer applications where sanitary processing is critical. Reduce from 3" to 1.5" flange sizes. FlowLinX Sanitary Fittings are available in polypropylene material and are compatible with other TC flanges made to…
-
PFA 90° adapter, compression to male NPT fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the…
-
Tubing
HamiltonSlip plastic tubing over the end of the connector to quickly adapt the tube to a 1/4-28 connection.
-
Weld to single-use bags to transfer cell culture, drug compounds, and other biological fluids Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system. Free technical application support available to determine which connector type is needed…
-
Low-Pressure Y Connector Assemblies
IDEX Health & ScienceUse Y connectors in a variety of low-pressure situations throughout your fluidic system. Y connectors create less turbulence and solvent outgassing than Tee connectors, improving analytical results. Handy mounting holes make it a snap to mount connectors. Y connector assemblies come complete with…
-
-
Super Flangeless™ Nuts, 1/4-28 Flat Bottom for 1/8" OD Tubing
IDEX Health & ScienceCombine with Super Flangeless™ ferrule for a high pressure holding flat-bottom fitting assembly Eliminates tubing twist that can loosen connections Resistant to loosening through vibration
-
Manufactured in an ISO Class 7 certified cleanroom to minimize contamination by pollutants. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system. Free technical application support available to determine which connector type is needed for…
-
Tubing Connectors
Cadence SciencePlated Brass or 316 Stainless Steel Meets ISO 594 Specifications Final Assembly water tested at 45 PSI For industrial use only.
-
Sanitary Hose Barb Connector
Thermo Scientific NalgeneThermo Scientific™ Nalgene Sanitary 1 in. Hose Barb connector supports connections between 1 ″ sanitary fitting to flexible tubing with inner diameter of 0.5".
-
Four-Way Connectors
United Scientific SuppliesPolypropylene cross-shaped connectors with serrated ends are ideal for leak-proof tubing connections. Autoclavable.
-
Reducer Tubing Adapters
Foxx Life SciencesFoxx Life Sciences connectors are available in a variety of standard sizes. They provide a secure, watertight connection. These connectors make it possible to connect two hoses, securely and efficiently. Made from polyethylene.
-
LDPE Check Valves
SP Bel-ArtEnsure one-way directional flow in vacuum lines with these polyethylene plastic check valves. Operate positively; instantly blocks flow if direction changes Built-in arrows indicate direction of free flow Neoprene disk, no metal Maximum operating pressure is 20psi
-
T-Shaped Connectors
United Scientific SuppliesPolypropylene T-shaped connectors with serrated ends are ideal for leak-proof tubing connections. Autoclavable.
-
Bulkhead Panel Mounted Fittings
Cadence ScienceThese are ideal fittings for critical instrumentation where there can be no movement of the adapter. Each bulkhead fitting includes a 1/4"-28 hex panel nut as well as a lockwasher for secure fit. For industrial use only.
-
Technical Features: fits 1/8 inch ID Tubing (0.125 inch, 3.2 mm)
-
Manufactured in an ISO Class 7 certified cleanroom to minimize contamination by pollutants. Ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of your system Free technical application support available to determine which connector type is needed for…
-
2- and 3-Way Valves
BürkleTwo and three-way valves are used for transfer of liquids or gases in order to release the flow, to block it or to change its direction. PP/PE: for industrial use, red/white PVDF: excellent chemical resistance, transparent, suitable for food Operating temperature: PP/PE +5 up to…
-
Technical Features: Fits 0.70 inch OD Tubing (17.8 mm)