Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies quartz torch with 1.8 mm injector, is often used for smooth functioning in the system. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Barrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…

Agilent torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs. Torches without slots are recommended for organic solvents. One-slot torches are the standard torch for aqueous solutions. Three-slot torches…

The Agilent Technologies mounting block is suitable for Quick-Change torch module and Optima 2x00/4x00/5x00/7x00/8x00 instruments. It features high-quality, durable material construction. Application: For Quick-Change Torch Module, Optima 2X00/4X00/5X00/7X00/8X00 This product is only available…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs. Torches without slots are recommended for organic solvents. One-slot torches are the standard torch for aqueous solutions. Three-slot torches…

Easy-fit 2.4 mm semi-demountable high solids torch for 5000 series VDV/SVDV ICP-OES. Features a 2.4 mm ID injector with replaceable extended outer tube with slot for radial viewing. Recommended for high TDS samples. This product is only available to U.S. Domestic Customers. For research…

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

Torch igniter tape, copper, for Optima 8x00, 50 pieces. Application: For Optima 8X00 PerkinElmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Quick-change torch module, includes cyclonic spray chamber and concentric nebulizer, for Optima 8x00. Application: For Optima 8X00 PerkinElmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Easy-fit 1.4 mm semi-demountable torch for 5000 series RV (radial) ICP-OES. Features a 1.4mm ID injector with a replaceable shorter tube (no slot) for dedicated radial viewing. This torch is recommended for routine analysis of aqueous and semi-volatile organic samples. This product is only…

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

Easy-fit 1.8 mm semi-demountable torch for 5000 series VDV/SVDV ICP-OES. Features a 1.8 mm ID injector with replaceable extended outer tube with slot for radial viewing. Recommended for routine analysis of aqueous samples. This product is only available to U.S. Domestic Customers. For…

Matrix Value-Pack to support routine operation of Agilent axial ICP systems with inert sample introduction system. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs. Torches without slots are recommended for organic solvents. One-slot torches are the standard torch for aqueous solutions. Three-slot torches…

Agilent ICP-OES inert torches with alumina/ceramic injectors allow the analysis of samples contain hydrofluoric (HF) acid. HF resistant torches/injectors are suitable for handling HF digests unlike standard quartz injectors where the free HF attacks and degrades the quartz components. Inert torches…

The Agilent Technologies fully demountable inert torch assembly kit is used for hydrofluoric (HF) acid analysis of samples in axial 700, Vista and Liberty series ICP-OES systems. Application: For Axial 700, Vista & Liberty Series ICP-OES, For Analysis of Samples Containing Hydrofluoric (HF) Acid …

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

Torch igniter tape, copper, for Optima 2/4/7x00, 120 squares. Application: For Optima 2/4/7X00 PerkinElmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

Injector support adaptor, bottom, for cyclonic spray chambers, for Optima 4300V/5300V/7300V. Application: For Cyclonic Spray Chambers, for Optima 4300V/5300V/7300V, PerkinElmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…

O-ring kit, complete, for vertical torch, for Optima 4300V/5300V/7300V. Application: For Vertical Torch, For Optima 4300V/5300V/7300V This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies O-ring kit includes all parts made of high-quality materials. Kit is suitable for Optima 2x00/4x00/5x00/7x00 DV/8x00 instruments. Application: For Injector Support Adapter, for Optima 2X00/4X00/5X00/7X00 Dv/8X00 This product is only available to U.S. Domestic Customers. …

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.