Cadence Science® pipetting needles are available in a wide choice of sizes for use in laboratory procedures. All needles are made with type 304 stainless steel cannulae. Catalog numbers 7950 to 7957 needles are fitted with stainless steel hubs for special applications with corrosive materials…

The BD™ Tuberculin syringe features bold, clear scale markings to assist in making easy and accurate dosage measurements. The thinner and smaller syringe size is easier to control and is less threatening to patients. *Intended use for general purpose fluid aspiration/injection and NOT…

Sterile, designed for single use Individually wrapped, with protective guard on needle Non-toxic; non-pyrogenic Syringe capacity and needle size are plainly marked on wrapper, which is color-coded to needle gauge. Needle hub and plunger are made of Color-Klear™ translucent,…

Monoject™ Tuberculin Syringes are available with both permanent and detachable needles. They are sterile, latex free, single-use, and packaged in either rigid or soft pack. Features Ultra comfort, anti-coring needle Graduations: 0.01 mL and 0.5 Sterile and latex free …

Sterile, single-use, autoclavable (8941B14-8941B44) Syringes do not include needle Heat-staked, tamper-evident cap assures sterility Bold, easy-to-read graduations Positive plunger stop and three-piece rigid pack Translucent, color-coded hub shows blood flashback …

SOL-Millennium offers a wide range of hypodermic needles with the focus on patient comfort. The hubs are color coded for gauge identification. SOL-M™ blister peel-apart packaging allows for ease in dispensing the needle.

Lavender Threaded Luer Lock Hub; 30 gauge 0.5 inch - id inch:0.006(0.1524mm) od inch:0.012(0.3048mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.

Monoject™ Hypodermic Needles are available as needle only or needle  and syringe combinations Features: • Stainless steel lubricated cannula • Color-coded needle hub • Not manufactured with DEHP or natural rubber latex • Sterile,…

304 SS needle with chrome-plated brass Luer hub. Needle is designed with a slightly curved, deflecting tip to prevent coring during needle insertion through the septum. Standard Hub with 304 Stainless Steel Tubing

Green Threaded Luer Lock Hub; 18 gauge 1.25 inch High Precision Taper Tip- id inch:0.033 (1.20mm) polypropylene plastic threaded tapered dispensing tip.

Widely used for allergens and the mixing of adjuvants and antigens, oil based liquids or any two liquid media differing in viscosity. By locking two syringes on to the double hub needle or double hub adapter, two liquids such as a mineral oil and an emulsifying agent may be readily pumped between…

The Dynarex Tuberculin Safety Syringe provide a sterile, effective way to deliver small doses of medication accurately. Each needle has a double bevel, allowing for ease of penetration while reducing the required plunger force, helping larger doses flow smoothly. With wider unit spacing, the users…

PInk Threaded Luer Lock Hub; 20 gauge 0.5 inch - id inch:0.025(0.635mm) od inch:0.036(0.9144mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.

SOL-M™ blunt fill needles can be used to draw-up medication, reconstitute medication and accessing IV bags. These needles can replace standard hypodermic needles to reduce the risk of needle stick injuries. SOL-M® blunt fill needle has a 45° bevel and is compatible with standard luer…

Permanently attached needle Reduced dead space for reduced Insulin waste Smooth plunger action for greater filling accuracy Auto ground needle tip for greater comfort Latex Free   Sterile Non-toxic   Non pyrogenic 

Modern GC Headspace analysis requires injecting over large temperature ranges (e.g. ITEX analysis). Traditional headspace syringes come with a rubber O-ring sealed plunger which has a limited sealing performance at high temperatures. Hamilton's NEW headspace syringe with its unique,…

Designed for use with the Wheaton Stepper™ 411 Repeater Pipette Accepts red color-coded, 37.5mL Ecostep™ Syringes 5/Case

Non-sterile, clean, ready-to-use Assembled, graduated Bulk packed in double wrapped polybags. Can be autoclaved or gas sterilized out of polybags. 8940S32, 8940S69, 8940T39, 8940T75, & 8940V50 *Intended use for general purpose fluid aspiration/injection and NOT for storage…

These polypropylene syringes with Luer tips, may be used with any size needle. The rigid polyethylene plungers of these disposable syringes are slightly oversized, creating a tight seal against the walls of the semi-flexible PP barrel, as well as providing an exceptionally smooth draw. No…

Bulk, Non-sterile DNR (Latex) free 125/case

Sol-M 3-Piece Syringes accurately measure liquid medications and are available in a wide range of sizes. High-transparency barrel to easily visualize contents Silicone lubrication ensures smooth plunger movement Plunger backstop that prevents accidental withdrawal of plunger…

The TS Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminum locking insert, then molded into polyethylene hubs. molded hub colors correspond to gauge…

Passive safety mechanism for the prevention of needlestick injuries Needle bevel is designed for easy insertion that minimizes patient comfort Catheter is made of polyurethane (PUR), allowing for a softer catheter insertion that improves patient comfort Variety of catheter gauges and…

Green Threaded Luer Lock Hub; 18 gauge 0.5 inch High Precision tip - id inch:0.033(0.84mm) od inch:0.050(1.27mm). Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.

The BD Vacutainer® push button blood collection set offers a clinically demonstrated, split second retracting safety needle to help reduce costly needlestick injuries. It is available with a preattached holder for added convenience and to help meet the Occupational Health and Safety…

Easy to use Pressure tested up to 100 psig Autoclavable Lever-actuated on/off valve for use with Luer Lock Gastight® syringes from 50 µL to 2,000 mL. Collect gas or fluid samples and transport or store them in their original sampling syringe. Teflon® fluid/gas path…

Lavender Threaded Luer Lock Hub; 30 gauge 516 inch - id inch:0.006(0.1524mm) od inch:0.012(0.3048mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.

For lab use only.

Pink Threaded Luer Lock Hub; 20 gauge 2.0 inch High Precision tip. Polypropylene plastic threaded hub with burr free passivated stainless steel canula, bonded with a UV cured adhesive.