Lab Stoppers

Lab stoppers are essential for maintaining the integrity and safety of experiments in laboratory settings. These small yet vital components play an essential role in sealing and securing various lab containers, ensuring the stability of samples and reagents.

This category includes a variety of stoppers, each tailored for specific needs. Rubber stoppers, known for their flexibility and tight seal, are perfect for general use in flasks and test tubes.

Convertible stoppers offer versatility, easily adapting to different lab apparatuses. Color-coded stoppers enhance lab organization, allowing for quick sample identification and reducing the risk of cross-contamination.

Lab stopper options include plug-type rubber sleeve stoppers, which provide a secure fit for more complex laboratory setups, ensuring airtight conditions for sensitive experiments.

Lab stoppers, ranging from simple rubber variants to specialized butyl stoppers and glass stoppers, are indispensable for ensuring the safety and accuracy of laboratory work.

Their ability to effectively seal and protect makes them an essential in any lab environment.

Compare Tool

Select up to 3 products

1 - 32 of 218
Sort
View
Show
  • Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

  • Standard Grade Size No. 000 is 18 mm long; sizes No. 00 to No. 13 are 25 mm long. Sizes No. 13 1/2, 14 and 15 are 35 mm, 36 mm and 39 mm respectively.

  • quick-ship

    GSC International, Inc.

    Quality, laboratory grade Cork Stoppers. Available in the following sizes: Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7 Size 8 Size 9 Size 10 Size 11 Size 12 Size 14 Size 16 Size 20 Size…

  • quick-ship

    Plasticoid

    M35 Green Neoprene for added chemical resistance Listed mainly by trade-size, available in solid, one-hole, and two hole rubber stoppers. Uses vary widely, some are outlined below: Carboy Stoppers Crucible Holders Laboratory & Test Tube Stoppers Masking Applications Micro Stoppers Pipe…

  • Charlie Plugs are breathable drosophila plugs made from recycled polyester. Polyester is stronger, more breathable and offers excellent mite prevention than cellulose acetate plugs. Charlie plugs leave no clinging fibres they do not retain moisture and are completely made in the USA from recycled…

  • Hollow plug to fit inside bottles, flasks, vials, or tubing with a sleeve to pull over neck to create a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on…

  • Inexpensive, tapered stopper provides for a tight, leak-proof fit while the top ring permits the stopper to be easily removed. Stoppers are made of yellow Polyethylene

  • Similar to CG-3026 and CG-3027 except with two holes. These stoppers are suitable for practically all general laboratory uses. Composition ensures resiliency and pliability over a long period and withstands laboratory conditions without hardening. The dimensions are in accordance with…

  • Plasticoid

    Hollow plug to fit inside bottles, flasks, vials, or tubing with a sleeve to pull over neck to create a double seal .Septa area allows insertion of needle, with excellent re-sealing properties for air sensitive chemistry Standard Compounds include Red and White Natural Rubber, Gray Butyl on…

  • MilliporeSigma

    Synonyms: rubber stopper; rubber stoppers; stopper

  • quick-ship

    United Scientific Supplies

    Convenient assortments of various sizes of rubber stoppers in 1lb bags.

  • DWK Life Sciences (Kimble)

    Stoppers are used with laboratory glassware such as flasks and separatory funnels. Sizes Standard Taper 10/30 through Standard Taper 19/38 are solid Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Medium length standard taper stoppers, size 7/15, 10/18 and 12/18 are solid, all others are hollow.

  • Engineered for a "push on" fit in NMR tubes and ampules. The unique design provides a penetration point for cannulation and a dual seal inside the tube and on the outer sleeve. Will not break delicate, thin-wall tubing. Manufactured from one certified raw material formulation for absolute…

  • DWK Life Sciences (Kimble)

    Yellow and blue closed-bottom linear high-density polyethylene stopper to fit in the ground glass neck Enlarged flange on stopper is designed to protect the glass if tipped over Size: 13 Case of 6

  • This precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…

  • A small, low holdup automatic head which can be completely disassembled for easy cleaning or replacement of parts. Lower column joint and side arm for condenser are 24/40. Joint on takeoff arm is 28/11. The plunger guide is 19/38 and the 10/30 thermometer joint may be used with our 8314 product…

  • DWK Life Sciences (Wheaton)

  • GSC International, Inc.

    1 pound pack of assorted solid rubber stoppers. Sizes and quantities are as follows: Size 00: 4 each Size 0: 4 each Size 1: 4 each Size 2: 3 each Size 3: 3 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each

  • •This narrow ring seal is an alternative to a PTFE joint sleeve •Greaseless protection for air- and moisture- sensitive compounds •Can be used for prolonged storage under vacuum •Slide easily onto medium and full length taper joints •Can be used with Keck® clip and similar metal joint clips …

  • •This narrow ring seal is an alternative to a PTFE joint sleeve •Greaseless protection for air- and moisture- sensitive compounds •Can be used for prolonged storage under vacuum •Slide easily onto medium and full length taper joints •Can be used with Keck® clip and similar metal joint clips …

  • •This narrow ring seal is an alternative to a PTFE joint sleeve •Greaseless protection for air- and moisture- sensitive compounds •Can be used for prolonged storage under vacuum •Slide easily onto medium and full length taper joints •Can be used with Keck® clip and similar metal joint clips …

  • Borosil® Amber Solid Penny Head Glass Stoppers are with Interchangeable Ground Joint and can be used with Volumetric Flask of 5645, 5647 families or for other suitable joints. Manufactured with low extractable quality grade USP Type I, 3.3 Borosilicate Glass confirming to ASTM E438 Class A…

  • Penny-Head Stopper, Glass, Solid, Synthware, Various Joint Sizes Available.

  • MilliporeSigma

    Sleeve stopper septa are manufactured from pure natural rubber for excellent resealability when used for cannulation techniques or from FKM rubber for high chemical resistance. Natural rubber septa are available in red and white colors and a soft rubber formulation that contains no fillers or…

  • DWK Life Sciences (Kimble)

    These high quality gray chlorobutyl stoppers are used for research and pharmaceutical packaging applications. Universal gray chlorobutyl formulation passes Japanese, European and United States pharmacopeia testing for globally marketed pharmaceutical products Formulation contains no…

  • DWK Life Sciences (Kimble)

    These stoppers are used as an accessory for microscale threaded Standard Taper 14/10 kits. Pennyhead stopper sizes 10/18 through 19/22 are solid borosilicate glass Sizes 24/25 and larger are hollow borosilicate glass Manufactured from 33 expansion, low extractable borosilicate glass…

  • Dynalon

    Stoppers - Test Tubes 11-12 MM (1211Z88) Product Dimensions (l x w x h) : 0x0.463x0.622in Natural Test Tube Stoppers. Low-Density Polyethylene, 11mm-12mm tubes. Single- position tight fitting stopper to fit disposable test tubes.  Stoppers - Test Tubes 16 MM (1211Z93) …

  • With a patented Glas-Col Snorkel Stopper, you'll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it…

  • The recommended choice for use with organic chemicals and solvents, pressure applications, and cannulation techniques:Precision Seal septa are designed specifically for the rigorous requirements of chemical applications. •Precision fit: Precision Seal septa have a longer, tapered plug that seats…

  • The recommended choice for use with organic chemicals and solvents, pressure applications, and cannulation techniques:Precision Seal septa are designed specifically for the rigorous requirements of chemical applications. •Precision fit: Precision Seal septa have a longer, tapered plug that seats…

  • Engineered for a "push on" fit in NMR tubes and ampules. The unique design provides a penetration point for cannulation and a dual seal inside the tube and on the outer sleeve. Will not break delicate, thin-wall tubing. Manufactured from one certified raw material formulation for absolute…

Compare Tool

Select up to 3 products