Stir Bar Micro, 1.5X15 mm ( 1210C97 ) Product Dimensions (l x w x h) : 0.591x0.073x0in 15 mm length. For stirring  test tubes, micro-beakers, etc... Covered with polytetrafluoroethylene white resin. Stir Bar Micro, 1.5X8 mm ( 1210C98 ) Product Dimensions (l x w x h) :…

Stir Bar Polygonal 108X27 mm (1212Z66) Product Dimensions (l x w x h) : 4.25x1.022x0in Extra Large Polygonal Stirring Bars. Polytetrafluoroethylene. 1 08 mm length. Heavy duty for stirring large volumes of liquids on large magnetic stirrers. Stir Bar Polygonal 159X27 mm …

The Corning stir bar retriever contains a strong magnet to remove a stir bar from all glass and plastic containers used in the laboratory. The container must be taken off the magnetic stirrer before using the retriever as the high-powered magnet in the stirrer cancels out the one in the retriever.…

Contamination-free stirring-price justifies single use Four convenient sizes Disposable price Resistant to virtually all chemical attacks High-quality stirring bars molded with strong magnets permanently coated with white PTFE. Available in the four most popular sizes to…

PTFE-covered round magnetic stirring bar. This stirrer bar permits stirring in closed containers without contamination. Supplied in glass vial with polyethylene stopper. Approx. Overall Width (mm) : 4 Approx. Overall Length (mm) : 12 Bars per Vial : 2

Convenient assortment packs suit a variety of needs. Choose from octagonal, round, micro or color-coded bars to best suit your needs Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO…

Flexible, Teflon® rod with a powerful Alnico Teflon® coated magnet for retrieving magnetic stirring bars from containers or non-magnetic sink drains and traps. Flexible white rod is 33cm (13") long Autoclavable

Reduce frequency of spinout in viscous solutions or when stirring at high speeds. The high magnetic field strength of Samarium Cobalt (Rare Earth) magnets can provide up to three times stronger coupling vs. Alnico magnetic stirring bars.  Stronger coupling with the drive magnet keeps…

Cylindrical magnetic stir bar with pivot ring. various sizes available.

Product Dimensions (l x w x h) : 0.518x0.473x0.849in Vane Bar. Polytetrafluoroethylene. Round Tapered for use in Trim to fit various. Solid polytetrafluoroethylene resin vanes with molded magnetic bars in center. Permit rotation in small conical tubes. Ensure thorough sample mixing.

Octagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Choose from red, yellow or blue. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and…

These stir bars have polygon multifaceted surfaces that add turbulence relative to similar smooth size cylindrical bars. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO 9001:2008 facility, as…

High quality polygon shaped stir bar without pivot ring, teflon coated magnet.

Eliminates sparking hazard Compact unit Stirrer is powered by a low pressure air supply that eliminates the sparking hazard from electrical sources. Compact unit operates using only 3 to 8 psi (21-55 kPa) air pressure and it is useful for stirring vesseals up to 1 liter. Tubing is…

Stir Bar Kit, Magnetic, PTFE, Mirco, To Consist Of The Following: 6ea CG-2003-12, 6ea CG-2003-14, 6ea CG-2003-16, 3ea CG-2003-10, 3ea CG-2003-13, 3ea CG-2003-17.

A variety of magnetic stirring bars from 159mm (6") to 10mm (0.5") bars are supported on the Garage. Wires on the upper half of the rack are arranged close together and designed to capture smaller magnetic stir bars; larger bars are captured on more widely spaced wires in the lower half…

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

Permanent magnet sealed in shell with triangular cross-section

Stir Bar Egg-Shaped 3/8X3/4" (1210D76 ) Product Dimensions (l x w x h) : 0.785x0.397x0.4in PTFE 20 mm length   Stir Bar Egg-Shaped 1/2X1" (1210D77 ) Product Dimensions (l x w x h) : 1x0.511x0.515in PTFE 25 mm length Stir Bar…

This Amicon stirred cell model provides high flow rates with solutions up to 10% macrosolute concentration. Capable of rapid concentration, or salt removal followed by concentration in the same unit.

Molded, seamless Teflon construction ideal for procedures using all bellco magnetic stirrers. Excellent for mixing media and buffer solutions Size: 25.4 x 7.6mm Case qty: 6

Molded, seamless Teflon construction ideal for procedures using all bellco magnetic stirrers. Excellent for mixing media and buffer solutions. Size: 50.8 x 9.5mm Case qty: 6

Stirring bars using rare earth magnets have significantly increased magnetic strength compared to those using Alnico magnets, but more importantly they are almost totally resistant to demagnetisation.Stir bars using rare earth magnets are identified by a carbon black spot which us chemically inert.…

This magnetic stirring bar fits into the standard 10mm light path cuvette and provides rapid vertical and horizontal mixing with a minimum of vortexing when placed on a magnetic stirring machine. Centrifugal pumping action, generated by the cross channels in the upper face, mixes without…

Cross head magnetic stir bars made of polytetrafluoroethylene. Greater mixing action at bottom, side, and top of container, even at low stirring speeds. No splashing, less noise. For test tubes, round bottom or flat bottom labware. Polytetrafluoroethylene resin with cross-shaped fins and…

These stirbar assortments come in a convenient storage box and provide instant availability of these highly popular Teflon® PTFE encapsulated Alnico magnets. Choose from Octagon, Cylindrical, Polygon, Micro, Egg-Shaped or Spinplus® shaped assortments FDA Grade, USP Class VI…

Magnet permanently embedded in PTFE rod Ideal for retrieving magnetic stirrer bars from particularly sensitive or corrosive liquids

The LaMotte 7 Inch stirring rod is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of sturdy plastic material which ensures durability and long lasting usage.

Octagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and added turbulence when compared to…

Spinwedge® magnetic stirring bars provide strong turbulence at fairly low speeds and are well suited for churning sediment or dissolving salts. Wedge shape is designed to plow up sediment for thorough dispersion Sharply angled broad face provides strong mixing action, perfect for…

Stirring bars using rare earth magnets have significantly increased magnetic strength compared to those using Alnico magnets, but more importantly they are almost totally resistant to demagnetisation.Stir bars using rare earth magnets are identified by a carbon black spot which us chemically inert.…

Two lengths to fit a wide range of vessels Autoclavable While many magnetic stirring bars are impeded by powders in a liquid, the Saturn Spinbar overcomes this problem. A large bulb in the bars center lifts the stirring bars ends while spinning thereby reducing surface contact area and…