Turbidity 4.0 NTU +/- 0.04 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material

Certified Reference Material Traceable® Certificate comes with each bottle Highest accuracy available Use Standards with all meters Traceable® Conductivity Standards, a Certified Reference Material, are 100% compatible with all makes of instruments and probes.…

KHP in dilute phosphoric acid Total organic carbon 1000 +/- 10 ppm Matrix: Phosphoric acid <1%

Inorganic Ventures' Tune B ICAP Thermo Standard is a certified reference material set in a nitric acid / hydrochloric acid matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date. …

T-CAL® Turbidity Standards are stable Formazin standards prepared in ready-to-use concentrations to ensure accurate turbidity measurements. All concentrations are verified to meet tight quality control specifications, are EPA & ISO compliant for reporting purposes and guaranteed to…

1000 ppm TKN in reagent water. TKN source is high purity Glycine. Packaged in a 500mL HDPE bottle. A NIST Traceable reference Material.

For all EPA 180.1 turbidimeters. TEST Turbidity 0.1 NTU +/- 0.02 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material

Turbidity 5.0 NTU +/- 0.05 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material

ProCal Primary Turbidity Standards have been certifiedby HF Scientific for use in the Hach® 2100Q Portable Turbidimeter. No formazin is used, making the standards safer, easier to use, accurate and less expensive that the equivalent Hach® product. In addition to being approved by the EPA,…

Use as a daily control standard. Check the accuracy and precision of your analysis. Trace Metals I, Groundwater And Wastewater Pollution Control Check Standards. Volume 125 mL. Elements Concentration Aluminum 500 mg/L Vanadium 250 mg/L Arsenic 100 mg/L Beryllium 100 mg/L Chromium 100 mg/L…

Turbidity 40 NTU +/- 0.4 Absorbance at 455nm (50mm pathlength) Lot Number of Baseline Material

TEST Turbidity 6.0 NTU +/- 0.06 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material

Product Name: 501 Trihalomethane Mix Conc. in Solvent and Volume: 200 μg/mL each in P&T methanol, 1 mL/ampul Min Shelf Life on Ship Date: 6 months Certified Reference Material (CRM): Yes Compounds Bromodichloromethane (75-27-4) Bromoform (75-25-2) Chloroform (67-66-3) …

Inorganic Ventures' AGI ICP-MS Tuning Solution 1 is a 125 mL certified reference material set in a nitric acid matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . To obtain COA…

pharmaceutical secondary standard; traceable to USP Synonym(s): 2- tert -Butyl-4-methoxyphenol; 3-BHA; BHA Empirical Formula: C₁₁H₁₆O₂ Formula Weight: 180.24 Linear Formula: C₁₁H₁₆O₂ MDL Number: …

This kit tests for turbidity using a turbidmetric card used match clarity to your sample. Range and sensitivity is 0, 20, 40, 60, 80, 100 JTU.

TEST Turbidity 600 NTU +/- 6 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material

TEST Turbidity (AQ4500) EPA mode Turbidity (AQ4500) ISO Neph. mode Turbidity (AQ4500) IR Ratio mode Thermo Electron AQ4500 serial number Instrument calibration date Formazin Concentrate (

Matrix: H2O Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility

TEST Turbidity (Haze) 1.0 EBC +/- 0.05 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material

For Endress and Hauser, Reagecon Diagnostic and Hach 2100 AN IS turbidimeters. TEST Turbidity (on Hach 2100 AN/IS) 4000 NTU Absorbance at 455 nm (10mm pathlength) 3.26-3.50 Lot Number of Baseline Material

pH: 3.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.000 g/cm3 (20°C) Ignition Point: 3.5 (H2O, 20°C)

TEST Turbidity (Emerson-Rosemount Clarity II EPA) 20 NTU Absorbance at 455nm (50mm pathlength) Lot Number of Baseline Material

Concentration: 1,000 µg/mL Matrix: H₂O/tr 0.24% F- Volume: 125 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate…

Inorganic Ventures' 10,000 ppm Tellurium for ICP is a certified reference material set in a hydrochloric acid matrix for stability. This tellurium standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …

TEST Turbidity (Haze) 5.0 EBC +/-0.1 Absorbance at 455nm (50mm pathlength) Lot Number of Baseline Material

Inorganic Ventures' 10,000ug/mL THORIUM . This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . To obtain COA and SDS information, please visit: https://www.inorganicventures.com/coa-sds-search …