Chemicals Standards S
-
SmartTune Solution for Standard ELAN/DRC-e
PerkinElmerFrom instrument installation to instrument calibration, we provide quality set-up, check and calibration standards to ensure instrument performance.
-
VeriSpec™ Sodium (Na) Standard for AAS, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
1000 ppm Sulfate for IC
Inorganic VenturesInorganic Ventures' 1000 ppm Sulfate for IC is a certified reference material set in a water matrix for stability. This sulfate standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . Size: …
-
-
The LabChem 1000 ppm silicon AA standard is set in water for stability and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Matrix: 2% HNO3/1% HF Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Assurance® Grade Scandium Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Concentration: 1,000 µg/mL Matrix: H2O Volume: 125 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…
-
SULFAMIC ACID, Primary Standard
GFS ChemicalsNH2SO2OH F.W.: 97.10 NFPA#: 2-0-2 Specific Gravity: 0.000 DOT: 8/III
-
Formula: Cr(NO3)3 in 3% HNO3
-
Copper 2 ppm Standard Solution
GFS ChemicalsAA, colorimetric or volumetric standard. Concentration 2 ug/ml Matrix: <5% HNO3 NIST Traceable
-
Ricca Yttrium ICP Standard
Ricca ChemicalThe Ricca Chemical yttrium ICP standard with a composition of 96.79% water, 3.09% nitric acid and 0.12% yttrium oxide, is suitable for research and laboratory use. It is used to increase strength of alloys of aluminum and magnesium. It can be stored at a temperature of 15 to 30 degree C.
-
-
Qualitative STEC Set
NSI Lab SolutionsA three sample set for qualitative identification of STEC. Set is designed to mimic typical FDA BAM and USDA MLG sample handling procedures. The PT set will contain one of the following: O26, O45, O103, O111, O121 or O145. The PT set can be used to rep
-
VeriSpec™ Gallium Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca 1000 ppm Ba in 3% HNO3 Barium AA Standard
Ricca ChemicalThe Ricca Chemical barium AA standard is perfect for the analysis and detection of chemical samples in laboratories and research facilities.
-
Concentration: 1,000 µg/mL Matrix: 2% HNO3 Volume: 125 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate …
-
spex® Sulfate-Sulfur Single-Element Ion Anion Standard
SPEX CertiPrepSingle and Multi-Element Standards for Ion Chromatography, Ion chromatography (IC) is an analytical process for the separation of ions based on charge affinity. IC can be used for a variety of different kinds of charged analytes from single elements to large proteins. In order to ensure accurate…
-
-
Ricca 1000 ppm Se in 3% HNO3 Selenium ICP Standard
Ricca ChemicalThe Ricca Chemicals selenium ICP standard is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Assurance® Grade Sulfur Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Concentration: 1,000 µg/mL Matrix: 2% HNO3 Volume: 500 mL Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate …
-
Iron 1,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 5% Nitric acid NIST Traceable
-
-
Common and Transition Elements Multielement Standard
GFS ChemicalsMatrix: 5% nitric acid with trace tartaric acid. Ag 100 ug/ml Al 100 ug/ml As 100 ug/ml Ba 100 ug/ml Be 100 ug/ml Bi 100 ug/ml Ca 1000 ug/ml Cd 100 ug/ml Cr
-
1000 ppm Mercury for ICP
Inorganic VenturesInorganic Ventures' 1000 ppm Mercury for ICP is a certified reference material set in a nitric acid matrix for stability. This mercury standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
-
VeriSpec™ Multi-Element Environmental Standard 26
Ricca Chemical100 ppm: Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sb, Se, Sn, Sr, Ti, Tl, V, Zn Matrix: 5% HNO3/ tr. HF/ tr. Tart. Ac. Min: >= 99.5 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accre
-
7500 Series PA Tuning Sol.1
Inorganic VenturesInorganic Ventures' 7500 Series PA Tuning Sol.1. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . To obtain COA and SDS information, please visit: …
-
VeriSpec™ Cadmium Standard for ICP, 1000 ppm in 2% HNO3
Ricca ChemicalMatrix: 2% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
1000 ppm Strontium for ICP
Inorganic VenturesInorganic Ventures' 1000 ppm Strontium for ICP is a certified reference material set in a nitric acid matrix for stability. This strontium standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . …
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)