Fast, easy-to-use film provides superior cling. Strong, clear Reynolds® Foodservice Film is ideal for covering, storing and wrapping. Continuous length rolls come in sturdy, easy-to-use dispenser cartons to prevent waste.

Acrylic Holds one standard box or roll of 4-in. (102mm) Parafilm* or two 2-in. (51-mm) rolls securely for easy dispensing. Channeled front allows for cutting Parafilm. Storage for blade included but blade is not included.

100% polyethylene wrap Low tangle High cling Ultra-clean film Metal tear-off bar makes it easy to cut the exact size you need Flap prevents roll from leaving box Wrap is 12” wide by 100 feet in length

Thermal Bond Thick Foil Heat Seal Ideal for PCR, especially water bath thermal cycler applications Appropriate for long term sample storage and transportation Appropriate for low temperature sample storage Strong, peelable bond to PP plates Excellent solvent resistance …

Clear Heat Seal, Peelable Optically clear, ideal for PCR, qPCR, fluorescence detection, and colorimetric assays Seals PP, PS, PC, PE, and COC plates Peelable Seal integrity: -80°C to 80°C Can be used up to 110°C when using a PCR instrument with pressurized heated lid…

Heat Sealing PCR Foil for sealing plates Hermetic sealing of multiwall plates Recommended for low reaction volumes Best protection against evaporation during PCR Easily removable PCR Foil is pierceable and peelable

This transparent sealing tape consists of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive which does not interfere with cycle reactions. It is ideal for reducing well-to-well contamination and/or spill over in sensitive PCR applications where the…

Standard Clear Adhesive Seal Suitable for short-term aqueous sample storage Peelable Seal integrity: -20°C to 80°C Certified free from DNase, RNase, nucleases and human gDNA

Pre-cut strips for sealing a single PCR 8-tube strip or a single 8-well row of a 96-well PCR plate. No more sore thumbs! Faster and easier to apply and remove than strip caps! Application: Ideal for standard PCR Temperature Range: -20°C to +120°C An economical and more…

AdvanceSeal Heat Seal, Peelable PCR Foil Application : Ideal for PCR applications Temperature Range : 4°C to +94°C Compatible with single sheet heat seal applicators Certified free of detectable levels of DNase-, RNase and Human DNA contamination (PCR Certified) …

Designed for long-term -80°C storage, light sensitive assays and robotics. The conformable foil allows visual verification of seal security around each well. Features excellent chemical resistance to DMSO.  Pierceable with pipet tips, robotic probes and needles. Removes easily and cleanly…

Axygen® Impermamat AxyMats™ sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. ImpermaMats are chemically resistant, reusable sealing mats, that provide a high degree of confidence. For storage applications involving more aggressive…

Ideal for cold storage, moderate and high temperature incubation, protection of light sensitive samples and high throughput samples Strong 2.7 mil thick pierceable aluminum film Non-cytotoxic and sterile Temperature stable from -80°C to 110°C Resistant to DMSO, chemicals,…

Kapton® thin window film for XRF liquid sample cups. 0.3 mil (8µm) thick. Supplied as continuous roll 2-7/8 in. (73 mm) wide, 50 ft. (15 m) long. FEATURES Often considered the closest thing to a “bombproof” XRF window film Incredibly strong and heat resistant…

MicronPlus  adhesive sealing films have adhesive-free areas over the microplate wells so that the adhesive is not in contact with the well contents. The sealing films are made with color adhesives with outstanding chemical and temperature resistance.  The PTFE material is inert, optically…

This premium-grade reusable and easy-to-clean film is made from virgin PTFE. The non-stick surface, temperature, and corrosion resistance features make Chemfluor® Film an ideal lining or covering for shelves, drawers, tables, trays, drain boards, and sinks. The film will not stain or retain…

ThermalSeal® A™ sealing films are an advanced version of Excel Scientific's classic ThermalSeal® sealing films for PCR. ThermalSeal A films consist of 50 µm polyester film with a 41 µm layer of acrylic adhesive formulated for improved protection against…

Eliminates the need for lubricants and vacuum greases on ground-glass joints, desiccators, bell jars, etc. Provides a vacuum-tight seal, yet will release readily even after long periods of time.

Application: PCR, Sample storage and transport, Long-term storage, High throughput, Automation, Anaerobic conditions, and Re-sealing pierced plates Temperature Range: -80°C to +105°C Features & Benefits ·Hermetically seals plates to protect samples …

Non-pierceable Peelable Seal integrity range: -40 °C to 110 °C Use Applications: qPCR and other fluorescent applications, plate readers, microscopy and protein crystallization (96 or 384 well) Removal: will not leave a sticky residue on the plate surface following removal

Peelable from all plate types Seal integrity range: -80 °C to 110 °C Good solvent resistance including DMSO Autoclavable (121°C) Use Suitable for short term room temperature storage Suitable for very low temperature storage

Recommended for use in sealing culture tubes, flasks, petri dishes, etc., as it prevents culture media from drying out Pliable, self-sealing, moisture-proof, thermoplastic sheet material, substantially colorless Molds and seals itself tightly around test tubes, flasks and instruments and…

Provides excellent evaporation protection Peelable film removes easily from plate surface Certified free of detectable levels of DNase-, RNase-, and human DNA contamination (PCR Certified) Heat and cold resistant, effective for temperatures from -80oC to +105°C Compatible with most…

Designed for PCR and general storage. The film is made from heat-resistant polyester and is much easier to handle and apply than foils due to its rigidity. Universal fit for use with flat-top, raised-rim and deep-well polypropylene plates. Smaller dimensions and chamfered corners result in no plate…

Ideal for short-term storage at ambient temperatures and robotics Designed for short-term handling and storage of samples that require multiple access to wells by pipet tips or robotic probes A pre-cut “X” over each well creates bendable flaps that provide sample access without…

Clear PCR Adhesive Seal Appropriate for PCR, qPCR, optical and storage applications Clear adhesive film with a strong adhesive Peelable Seal integrity: -20°C to 110°C Certified free from DNase, RNase, nucleases and human gDNA

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

BRAND offers a wide selection of accessories for multiwell plates including lids and sealing films. In cases where the multiwell plate needs not only to be covered, but also securely sealed, self-adhesive films are available. These film sheets can be applied on the plates and removed without the…

Semi-automatic sheet heat sealer compatible with a wide range of seals and microplates, PCR and assay plates, as well as storage plates of differing designs and heights. With variable temperature and time settings, sealing conditions are easily optimized to produce a 100% seal, eliminating sample…

This type of material is ideal for manual sealing during PCR work and also for high throughput applications. Adhesive backing makes it easy to apply. Will resist temperatures from -86 °C to +105 °C. Pierceable with a pipet tip for easy access to sample. DMSO resistant. It is recommended to use…

Suitable for PCR (requires the pressure from a screw-down heated lid) Easily pierced Peelable bond can be removed by hand 20μm foil is even more easily pierced and is suitable for multiple layering Recommended for use with DMSO Seal Integrity Range: -80°C to +80°C…