Reaction Vessels & Flasks
The versatility of reaction vessel chemistry makes them indispensable for experiments and production processes across scientific disciplines. They are crafted from materials that resist chemical corrosion and withstand high pressures, ensuring safety and durability.
Features like transparent walls for monitoring reactions and compatibility with heating and cooling systems add to their functionality, making them a foundational tool for researchers and professionals seeking reliable and efficient reaction solutions.
-
Jacketed large scale process reaction vessels. The 10, 15, and 20L vessels have a 200mm ID flange with an o-ring groove formed in the surface of the flange. The 30, 50, 75, and 100L have a 300mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964…
-
Reaction Vessel Lids, 6-Necks, 200mm
ChemglassSix-Neck lid for 200mm flanged vessel. Lid has 45/50 center neck, four 45/50 side necks and a 60mm angled flange for powder addition. PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.
-
EvoluChem™ Supplies
HepatoChemThomas No. 1160V24 This kit contains 1 reaction block (24x 2ml vial, 32X 0.3ml vial, 4X 2Dram vial), 1 decapper for 8 mm crimped vial and 1 syringe Hamilton 81000. Thomas No. 1160V25 1 reaction block (24x 2ml vial, 32x 0.3ml vial, 4x 2Dram vial) Thomas No. 1160V26 1…
-
Reaction Vessel Lids, PTFE, 150mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has nine openings: (A) center neck 1"; female NPT for PTFE standard taper adapter, (B) side necks 1"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 1"; female NPT with 10° X 10° compound…
-
Cylindrical, jacketed, peptide synthesis reaction vessel having a coarse porosity fritted resin support. The vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the corresponding lids. Lower…
-
Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The 10/30 outer joint will permit a thermometer to be inserted vertically to the bottom of the vessel. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
-
Solid phase peptide synthesis vessel having a medium porosity, fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower stopcock is a "T";-Bore 2mm PTFE to allow nitrogen to be used to upwardly agitate the resin beads…
-
Peptide Synthesis Vessels, Solid Phase
ChemglassSolid phase peptide synthesis vessel having a medium or coarse porosity fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower PTFE stopcock has a 2mm bore with the arm being 8mm O.D.
-
Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum
-
Ai Single Jacketed Filter Glass Reactor
Across InternationalThe Ai jacketed filter glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment, jacketed filter reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale…
-
Complete, two-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and…
-
50L Squatty Glass Reactor System
Chemglass50L Squatty, Low Profile, glass reactor system with 400mm flange, on our innovative Kwik Mount support frame. Complete 50L Squatty Reactor System Features: More Clearance: 50L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The…
-
Non-folding, removable side shelf support for Chemglass reactor support frames offers convenient support of distillation receiving flasks. Shelf features a V- shaped cut out area for easy viewing and installation of flasks with a bottom drain. Shelf attaches to the uprights of the support frame via…
-
Reaction Vessels, Cylindrical
ChemglassCylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T, for o-ring see CG-147.
-
Similar to CG-1864, but with the addition of a lower standard taper inner joint to allow collection into a vessel having a 24/40 outer joint. Available with MEDIUM or COARSE porosity fritted glass resin support. A serrated hose connection is sealed on the inner joint for connection to a vacuum…
-
Reaction Vessels, Jacketed, Benchtop
ChemglassFeatures: Chemically Resistant Perfluoro O-Rings On All CG-911-A And CG-511 Drain Valves Graduation Scale On Both Sides Showing the Approximate Volume Sidearm on Lower Drain Valve Can Be Used With a Standard 1/2 or 3/4in TFE, PFA or PP Compression Fitting All Vessels Are Serial…
-
OS1025 STEM Omni Reaction Stations
Electrothermal (Cole-Parmer)Our OS1025 STEM Omni Reaction Station enables you to run up to 10 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS1025 Omni Reaction Station means that the same base unit (OSCA) can accommodate a variety of cartridges and sample volumes…
-
Reaction Vessel Lids, PTFE, 80mm
ChemglassReaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 1/2"; female NPT for PTFE standard taper adapter, (B) side necks 3/4"; female NPT, vertical for PTFE standard taper adapters, (C) side neck 3/4"; female NPT with 10°; X 10°;…
-
Ai Dual-Jacketed 316L-Grade Stainless Steel Reactor
Across InternationalAi ETL C1D1 Dual-Jacketed 100L 316L-Grade Stainless Steel Reactor
-
ChemRxnHub™ Manifold System
ChemglassThe Chemglass manifold system for use with CG-1949-X ChemglassRxnHub™ frame system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as…
-
30L Process Reactor Sytems
ChemglassComplete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…
-
Pressure Reaction Vessels And Accessories
Andrews Glass Co.Allow for visual observation of all reactions and aerosols under pressure PVC coated glass minimizes potential hazard Additional protection furnished with optional clear plastic shield - highly recommended 1/8” NPT Threaded hole in needle valve adaptor (4967A66, not included)…
-
Double-Jacketed Reactor Vessel
Across InternationalAcross International replacement double-jacketed glass reactor vessels, specially made for Across International R20, R50 and R100 series 20L, 50L and 100L jacketed glass filter reactors.
-
Cylindrical shaped tube useful for storage or simple reactions with a standard taper inner joint at the top and a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from tube while a purge of inert gas is maintained through the sidearm. Valve size is as listed.
-
Ready Reactor™, Kilo-Scale
Ace GlassPre-packaged, turnkey 20 liter and 50 liter reaction systems for research and production purposes. Systems feature jacketed vessels, multi-neck flask heads, Universal support stand, and either a rod mounted brushless DC stir motor in our 20 liter (IKA Eurostar 60 Control) or a flange mounted 3/8 hp…
-
Adapters, Beaded Pipe, Aluminum
ChemglassAluminum transition adapter from beaded pipe on the inlet/outlet of the reactor to NPT. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.
-
Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. The unique design of the…
-
PTFE Baffle Cage, 4-Blade
ChemglassPTFE Baffle Cage, 4-Blade, 100mm ID Flange, for 1,000mL Vessel. PTFE insertable 4-blade baffle cage system for CG-1929-X series 100 and 150mm reactor systems. Baffle assembly has 4ea PTFE rectangular baffles attached 90 degrees apart to a 100 or 150mm flange ring. Flange ring is inserted between…
-
Ai Single Jacket Reactor w/ Explosion-Proof Motor & Controller
Across InternationalAi R-ex series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a…
-
This fluid driven Spray Ball gives nearly 360° spray coverage and is a convenient way to clean Chemglass 10 thru 100L glass reactors without dismantling the entire setup. It can also be used as a wall wetter. Spray ball is constructed of PTFE, the removable PTFE clip allows the…
-
Reaction Vessel Lids, 3-Necks
ChemglassThree neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)