Laboratory Liquid Pumps
Liquid pumps help maintain a consistent flow rate regardless of factors, including viscosity. Flow consistency is vital for maintaining accuracy with various experiments and processes.
Available at Thomas Scientific is a range of lab peristaltic pumps suitable for sensitive or corrosive liquids. Syringe pumps are also excellent for delivering precise and accurate volumes of liquid to support cell growth applications.
Microfluidic pumps are designed for applications that involve manipulating tiny volumes of fluids on microscales. Microfluidic pumps can control flows in the microliter or even nanoliter range.
Some pumps have additional accessories that provide easy maintenance, cleaning, and tubing replacement options to ensure clean and precise results.
-
Variable Speed Pump
Watson-MarlowThe 120 Series are small, but full-featured, laboratory pumps with simple intuitive operation and four pumphead options to suit any application. Compact footprint requiring minimal benchtop space: stacks two high Four pumphead options, with 1-, 2-, or 3-channel options to cover any application …
-
Syringe Infusion/Withdrawal Pumps
KD ScientificBacklit LCD Continuous dispense volume display Model 7888R96 is a single syringes infusion pump holding one syringe, 10 µL to 60 mL.
-
DPM Dispensing & Transfer Pump Accessories
Watson-MarlowThe Watson-Marlow accessories are suitable for use with DPM dispensing and transfer pump models, which are mainly used to overcome fluid handling challenges in various industries. These accessories ensure versatile, smooth and uninterrupted functioning of the transfer pumps.
-
5-pack AirChek ® XR5000 Pump Kit, high flow and low flow sampling, with five each: XR5000 pumps with high-power Li-Ion battery, filter cassette holders, adjustable low flow holders, constant pressure controllers, protective Type A tube covers, (1) five-station Multi-charger, 100-240V, and one…
-
Cartridge Pumps
Watson-MarlowSCI Q Speed range 0.5-90 rpm Switch selectable from 100-120 V to 220-240 V Digital closed-loop 180:1 speed control Pump liquids from 0.0003 to 21 mL /min per channel through 4 to 32 channels. Cartridges can be added or removed without disturbing pumping action of remaining…
-
-
BPLA Utility Pumps
Franklin ElectricSmall submersible pump that works well in marine applications. Pump can be used inline for intermittent use only.
-
Pony Pump® Series Utility Pumps
Franklin ElectricNon-submersible self-priming transfer pumps. Both in 115 V and 12 VDC, these models are designed to operate 15 minutes per hour. Model 370 is designed for higher and lower temperatures.
-
Pump, Submersible
Franklin ElectricSelf-priming, completely submersible Output 3 1/4 gpm (12 Lpm) at one-foot (0.3 m) head, 2 gpm (7.5 Lpm) at five-foot (1.5 m) head; maximum pressure 3.2 psi (22 kPa) Continuous-duty, 1.1 ampere motor, sealed and permanently lubricated, enclosed in epoxy-coated, cast-aluminum…
-
1-T/S Submersible Oil-Filled Pumps
Franklin ElectricFor commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…
-
9EN Series Effluent Pumps
Franklin Electric4/10 hp Submersible Sewage Pumps designed to handle 3/4" solids. Permanent split capacitor (PSC) motor, heavyduty cast iron housing, volute and cover, non-clog thermoplastic elastomer impeller and thermal overload protection. The "RF" automatic models feature a “piggyback” mechanical float switch…
-
GoatThroat pumps, long valued for their innovative design combined with a simple, safe, and clean hand-operated fluid delivery system, bring another innovative advancement to the industrial marketplace. These small, versatile pumps can now safely be used with shop air, aircompressors or…
-
BE Series Effluent Pumps
Franklin ElectricCentrifugal Self-Priming Effluent Pump available with ½ hp or ¾ hp, cast iron casing, higher than NEMA service factor dual compartment motors, built-in check valve facilitates fast priming and guards against siphoning action. Self-priming effluent pumps designed for installations with septic tanks…
-
6 Series Sump Pumps
Franklin Electric1/3 hp submersible sump pump with cast iron housing, polypropylene base, polycarbonate cover, and thermal overload protection. “CIA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". The 6-CIA-RS has a piggyback diaphragm switch with same “on/off”…
-
Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with…
-
Simple and Intuitive Operation Easy Calibration Cycle mode and adaptable to fluid characteristics Self priming, can run dry and dose up to 999 ml in one cycle Various control options Splashproof IP65 Small footprint
-
1/6 hp utiity pump, 115 V, 25' cord, manual operation
Franklin ElectricThe Franklin Electric 505712 is for submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter. Utility Water Pump: For submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and…
-
Stainless Steel Barrel Pumps
BürkleThe Bürkle barrel pump made of stainless steel AISI 304 (1.4301) is suitable for filling combustible and easily flammable liquids. The barrel pump can conduct electricity and therefore fulfills the requirements for handling flammable liquids in combination with the accessory antistatic set. …
-
GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…
-
5 Series Utility Pumps
Franklin Electric5 Series: 1/6 hp Submersible Sump/Utility Pump with cast aluminum housing, plastic base, bottom sump-type pick-up with removable plastic screen, pumps down to 1/8", thermal overload protection, 1" FNPT discharge with a garden hose adapter. 5-ASP features a diaphragm pressure switch…
-
Delta T™ Micro-Perfusion Pumps
BioptechsThe Micro-Perfusion Pump is a miniature, single or dual, channel, full-featured peristaltic pump designed for specific ranges of flow rates conducive to microscopy. Unlike most peristaltic pumps that are driven by stepper motors, the Micro-Perfusion Pump is driven by a tachometer regulated,…
-
Microsart e.jet Pump
SartoriusMicrosart e.jet Transfer Pump: The Microsart e.jet pump reduces operating complexity, conserves space and offers exceptional overall cleanliness. The e.jet is designed to pump both gas and liquids collectively, allowing the powerful system to draw simultaneous vacuum filtration and transfer the…
-
Anti-Static Set
BürkleWhen decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion. Bürkle’s Anti-static set ensures easy and reliable earthing. The…
-
Perfusion Temperature Controller
BioptechsThe Perfusion Temperature Control interface is a Windows XP computer program with associated interface hardware that allows the user to intuitively and repeatedly control perfusion or temperature in micro-fluidic cell chambers for time lapse imaging. It is designed to address the fluidic and…
-
ES60 High Capacity Sump/Effluent/Sewage Pumps
Franklin ElectricLittle Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…
-
Gas-Tight Barrel Pump
BürkleThe barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal…
-
VELP Scientifica has developed a range of peristaltic pumps useful for transferring liquids in industry sectors like pharmaceutical, food, biotechnological, chemical, beverage. Simple Operation Minimum maintenance (just replace the tube) Easy cleaning – no contact of liquid…
-
Heavy-Duty Siphon Drum Pump
New PigHeavy-duty Pump siphons up to 7 gallons per minute from 55-gallon drums. Moves up to 7 gallons of liquid per minute Compatible with mild solvents, light oils, diluted acids/caustics and disinfectants Maximum recommended viscosity: equal to 30-40 wt. oil
-
Epoxy Encapsulated Submersible Pumps
Franklin ElectricEpoxy filled pumps are compact in design, energy efficient, and have a corrosion-resistant plastic housing.
-
GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…
-
OTAL® disposable Pumps
BürkleWith universal plug made of soft PVC, for container volumes Ø 30-70 mm Scope of delivery: Pump ball, universal plug, cutter and 10 disposable delivery tubes OTAL pump with disposable delivery tube made of PE, for single use.In OTAL pumps the medium being transferred comes in contact only…
-
Thread Adapters
BürkleWe offer a broad range of thread adapters. This facilitates the secure connection of many of our pumps and discharge cocks to a variety of containers. You will always find the correct connection thanks to the combination of different adapters.
