Variable fill and dispense speeds Lighter, more compact than competing units Easy to operate Nine independently controlled fill and empty speed range options for liquids of varying viscosities. Fill and dispense both have fast, medium and slow settings. Can be used with glass and…

Thumb wheel rotated to raise or lower plunger Polypropylene housing, with silicone rubber seals Syringe-type, for easy, one-hand control of filling and delivery from conventional pipets. For rapid delivery, plunger can be depressed directly. Tapered-plastic chuck grips mouth end of…

The Accu-Jet® S Pipette Controller makes lab work simple, easy, and efficient, whether you work with cell cultures, in quality control or in a pharma lab. Precise pipetting of large and small volumes is easy due to single handed control of pipetting speed for fast, powerful aspiration,…

New ergonomic design - the most comfortable pipettor you ever laid a hand on New power source for uninterrupted extended operation - can be charged while in use New ultra quiet precision pump - great control for aspiration or dispensing The new Drummond Pipet-Aid XP2 advances the…

Capp Controller is light and fatigue free: weights only 167g, including the battery. Its lithium battery has no memory effect and enables up to 12 hours of continuous use. Capp Controller can be charged while using. It’s a powerful instrument, filling up a 50ml pipette in less than 10 seconds.…

Volumetric accuracy and reproducibility better than ±1% Hand-held and adjustable with digital readout of selected volume Utilizes color-coded and calibrated, disposable glass capillaries Pipet body of molded plastic; capillary held by collet chuck with rubber o-ring …

For safer, better contol of pipets up to 200 mL For use with glass or plastic serological or volumetric pipets Accommodates pipets from 0.1 to 200 mL Integrated hydrophobic filter helps prevent over aspiration Fits the hand for comfort and easy control Constructed of…

Resilient silicon rubber Enables filling and dispensing of pipets with one hand, safely through avoidance of hand or mouth contact with liquid. Our Silicone Pipet Fillers offer a softer feel with easier and faster operation of valves. Silicone is also more chemically resistant and more…

The Oxford Lab Products AccuHelp Pipette Controller is a powerful, lightweight and an ergonomically designed pipette controller that is perfectly suited for use with all commonly used glass or plastic pipettes. The powerful yet quiet pump of the AccuHelp Controller can fill a 25 mL serological…

Repeat Valve with Kit Adapts 7691K20 for continuous pipetting operations Pall valve has Luer slip fitting at dispensing tip; side arm takes 2 mm bore tubing for connection to suitable reservoir Valve diaphragm is ethylene polypropylene rubber Kit includes 7691L60 Pall…

Superior design for better pipette visibility and more precise dispensing User-friendly shape for maximum comfort Lightweight for easy, one-handed use Compact design is ideal for working in hoods or glove boxes Ergonomically designed for comfort and simplicity, the Pipette Pump III has a…

The 3-Valve Pipette Filler is available in chemically-resistant silicone rubber. The bulb accommodates pipettes up to 50mL and has a 1/4 inch diameter opening. Silicone construction

Longer lightweight handle reduces arm strain Efficient pump for extended operation Three speed settings for precise control The Portable Pipet-Aid XL has a longer handle to reduce arm strain during pipetting. Its ergonomic design includes an adjustable sliding hand rest and a…

Includes one natural rubber red three valve pipette filler, one silicon three valve pipette filler, one red natural rubber two valve "FLIP" style pipette filler, and one natural rubber three valve multicolored pipette filler.

Greiner Bio-One, a leading provider of labware, now offers compatible equipment as part of its product portfolio. Whether a start-up or established lab, we make it easier for you to order what you need from one supplier. We continue to look for synergies with compatible products to simplify…

Made of 302 stainless steel Typical load, 200 pipets, 7 mm o.d.; dries in approximately 1 1/2 to 2 hours Operating temperature at center of chamber is approximately 110°C Efficient drying is accomplished by chimney convection from a 275W heater in base, promoted by peripherally…

Compatible with most plastic and glass pipettes from 0.1 to 100mL  Eight speeds of selection for aspiration and dispensing  LCD display shows low battery warning and speed setting  Powerful rechargeable Li-ion battery enables 8h runtime  Enables single handed…

Manifolds for Drummond Microdispenser For use with 7691K20 Microdispenser and L55 Repeat Kit or L60 Pall Valve for multiple, simultaneous deliveries to microtest plates Manifolds are stainless steel, with removable Teflon ® end caps and Luer connector for attachment to pall valve …

EZ Grip Nosepiece TC Gasket Rubber Inserts

Powerpette® Wall Bracket:  Supplied with fixing screws and adhesive pad.

Easy and accurate to use. Can be used with all types of pipettes. Made from high quality plastic for long lasting use. Fast release lever Knurled thumbwheel East to clean Color coded

Motoric pipette filler for measuring, volumetric and Pasteur pipettes, from 0.1mL to 200mL Additional safety for special surroundings - pipetus® standard provides the best prerequisites for working in potentially explosive environments, with toxic reagents or in clean room technology…

Includes one each of Red, Black, Green, and Blue natural rubber three valve pipette filler for use with pipettes up to 100mL.

The light, ergonomic, motorized pipet controller Designed for use with glass and plastic serological  pipets from 0.5 to 100 mL volume ranges. Conveniently positioned switches change operating modes and speeds quickly to handle different liquid volumes and viscosities.…

ProPette™ Controllers from MTC Bio™ are lightweight (only 6.3oz/170g) and designed to fit comfortably in either the right or left hand. The natural feel of the ergonomic body design, the computer balanced weight distribution and the low pressure fingertip control buttons…all…

This molded rubber filter disc is designed to support and seal in place a filter crucible or a funnel in the neck of a filter flask. Inside diameter of the socket at top is 32mm, and outside diameter of the disc is 76mm. The bottom of the disc is flat so that it seals tightly against the lip of…

This bulb-type safety pipette filler is designed for efficient one-hand operation. Made from natural rubber for better memory and resistance to chemical attack. Its three glass valves control the evacuation of air, liquid uptake and liquid dispensing. Expel air from the bulb by squeezing the…

Syringe-type for easy, one-handed control of filling and delivery from conventional pipets Knurled thumbwheel is rotated to raise or lower plunger by rack-and-pinion drive For rapid delivery, plunger can be pressed directly Tapered socket grips mouth end of pipet Quick release lever on side of…

The electronic pipettes Eppendorf Xplorer and Eppendorf Xplorer plus were specially designed for high professional standards to provide optimal support for you in your work, with a new intuitive operating concept and design based on the proven Eppendorf PhysioCare® Concept. These features set…

Lightweight, ergonomic 0.5 to 100 mL pipette range Autoclavable Motorized and Ergonomic The labForce™ Pipette Controller — Lightweight and ergonomically shaped motorized pipette controller designed for work with glass or plastic serological pipettes from 0.5 to…

For Use With 0.1-100ml Glass and Plastic Pipettes.

XPress speed feature for faster dispensing A powerful pump designed specifically for Pipet-Aid® use Compact, lightweight design Individual speed controls for both the aspirate and the dispense buttons Designed and constructed with material that will withstand commonly used reagents …