Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Flint glass, with slight shoulder Tight fitting, lower-density polyethylene cap with thumb tab can be removed and applied easily with the same hand in which the jar is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays which can be pulled out as drawers.…

Borosilicate glass Base does not extend beyond body Used to display materials, particularly at exhibits and medical schools Fitted corks are included

White Polypropylene Jars are ideal for solids, powders and cosmetics. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Polypropylene offers greater tolerance to high temperatures than HDPE and better contact…

Autoclavable at 121°C Heavy walled, with standard Mason threaded neck Polypropylene screw cap has sealing ring and grip lugs

Rigid Clear Polystyrene Jars offer glass-like clarity with a smooth surface that is slip-resistant. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Attached PP SturdeeSeal® PE Foam Lined Caps are known for…

White, opaque jars with tight-fitting lids Designed to simplify and standardize the handling and storage of specimens Excellent chemical resistance Cannot be attacked by formaldehyde, weak acids or bases. Resist freezing or boiling temperatures. Easily disposable but sturdy enough for reuse.

Highly polished, tungsten carbide grinding jar set. Each jar set includes grinding jar, lid and rubber washer.

Wide Mouth Straight Sided Jars, Assembled with White Polypropylene Closure, Unlined.

Lid closely fits on shoulder but is not ground airtight Dimensions shown below are height, exclusive of lid x diameter Lid adds approximately 1 1/2” to height

Nalge 5242 Polyethylene Jars Cross-linked, high density polyethylene resilient; safer than glass. Tough, stiff, seamless jars resist stress-cracking. Ideal for soaking glassware, washing pipets with corresponding rinsers and baskets (see Thomas number 7792H78 in Pipets, Accessories). All sizes…

Clear glass allows for easy viewing of contents. Amber glass protects light-sensitive contents. Wide mouth design allows for efficient addition and removal of contents. Type III soda-lime glass. Six capacities: 1, 2, 4, 8, 16 and 32 ounces. Choice of five liner styles. 32 ounce jars are packed in…

Rigid Clear Polystyrene Jars offer glass-like clarity with a smooth surface that is slip-resistant. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Purchase closures separately.

Isostatically molded in pure, FDA approved, PTFE. Guaranteed chemically resistant and inert. Heavy wall construction. Suitable for IPA Method 1311 TCLP

Clarified Polypropylene Jars feature glass like clarity and excellent moisture barriers properties Jars are ideal for storing and collecting specimens and lab supplies Wide neck and straight sides facilitate easy recovery of content

With Caps with White Rubber Liners Wide-mouth design for efficient addition and removal of contents Clear glass allows for easy viewing of contents Type-III Soda Lime Glass

Highly shock resistant polypropylene, heavy-walled Mason Jars are ideal for industrial waste sampling, long term storage and a variety of laboratory uses. Standard 70mm, G-threaded necks, and screw caps with unique grip lugs and removable leakproof silicone rubber ring seal Cap and…

With Caps with PTFE-Faced LDPE Foam Liners Wide-mouth design for efficient addition and removal of contents Clear glass allows for easy viewing of contents Type-III Soda Lime Glass

QEC’s wide mouth straight-sided jars are excellent for sampling of soil, sediment and sludge. Level Three 4 oz. and 2 oz. jars are also tested and certified for volatiles. All are shipped assembled with PTFE-lined polypropylene caps. Preparation Levels for products on this page: …

Useful for collecting and storing pastes, solids, specimens and miscellaneous lab supplies; Nalge 2116 Straight sides and no shoulders to trap materials. Window-clear with high-impact resistance; non toxic. Excellent for cold room and refrigerated use. Autoclavable with white polypropylene screw…

Highly non-sticky PTFE jars. These jars are used whenever small quantity of samples need to be grinded/milled without contamination. Each jar set includes grinding jar, lid, silicon sealing gasket and a mixed size agate grinding balls. Lead tim

Transparent Straight-Side Containers of PETE (Polyethylene Terephthalate) with white polypropylene liner less screw closures. Store pastes, samples, powders, specimens etc. in industrial and lab applications. PETE is durable, shatterproof and has excellent gas barrier properties with H20, O2 and…

Fix, protect, and transport your slides all-in-one. Slide-Fix™ Slide Jars are used in a variety of applications including preservation and transport of Pap smear slides, post-surgical tissues and fine needle aspiration (FNA) biopsies. Prefilled jars contain about 25 mL of 95% ethyl…

Preassembled with foamed polyethylene lined polypropylene closures. All HDPE bottles and jars are also available with PTFE-lined closures or unlined closures. Available in standard and precleaned in accordance wth recommended E.P.A. Protocol. CLASS 1: (Standard) Containers are assembled with…

Nalge 2115 Autoclavable leakproof With 70 mm neck which fits fixtures or closures having Mason jar threads, such as Osterizer blending assemblies. Molding ring in polypropylene cap seals against mouth of jar to prevent breakage.

Ideal for use in soil, sediment and sludge sampling. Preassembled with .015" PTFE or F217 lined closed top white polypropylene closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. protocol. CLASS 1: (Standard) Containers are assembled…

Containers are HDPE except 8, 16, 32 oz natural and white, and 83 oz natural, which are PPCO, a copolymer of Polypropylene and High Density Polyethylene. PPCO offers a product with a higher temperature range while maintaining good impact strength. Recycling code is "5" for PP and the HDPE…

Store and transport solids with Thermo Scientific™ Nalgene™ Polypropylene Jars. These jars are chemically compatible with a wide range of lab materials. Straight sides and no neck making access and retrieval easy Larger sizes make excellent waste crocks Autoclavable

Designed for collecting soil, sludge, waste and water samples for a variety of organic and inorganic target analytes where light protection is required. Thermo Scientific™ Wide-Mouth Amber Glass Packers are available Certified to meet EPA performance-based specifications for semi-volatile…

Product Dimensions (l x w x h) : 0x5.75x6.5in 1/2 gallon capacity, high density polyethylene utility jar with plastic closure. Hundreds of uses around the lab. Wide mouth, natural color. Withstands temperatures to 110ºC.  

Natural Polypropylene Jars are translucent and durable. Jars are ideal for storing and collecting specimens and lab supplies. Wide neck and straight sides facilitate easy recovery of contents. Polypropylene offers greater tolerance to high temperatures than HDPE and better contact clarity. Purchase…

Purchasing assembled jars reduces sample contamination and streamlines ordering and inventory needs. The amber color protects light sensitive materials. The PTFE lined cap is inert making it a great option for use with strong acids and corrosive materials. The F-217 Foam liners seal with the…