ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

This hyper skimmer cone screw is used with NexION 1000, 2000, 300 S, 300 Q, 300 X, 300 D and 350 ICP-MS series instruments.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies front and back ferrule is suitable for use with 1.6 mm O.D tubing. It is compatible with ISIS-DS used with Agilent 7500 ICP-MS. Application: For ISIS-DS used with Agilent 7500 ICP-MS This product is only available to U.S. Domestic Customers. For research use only,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

PerkinElmer ICP-MS Coolant fluid, for ELAN 9000/6xX00/DRC/NexION, 1 L. Application: For Elan 9000/6Xx00/DRC/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum is the material of choice for more corrosive samples. The ELAN sampler cone, with a 1.1 mm orifice diameter, and the skimmer cone, with a 0.9 mm orifice diameter, are the largest in the industry. They…

Precision-designed and manufactured, large-ori ce sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum…

The Agilent Technologies two-stage ammonia/helium reaction gas regulator has high purity stainless-steel body and diaphragms which provide excellent strength and durability. It has CGA705 inlet with maximum pressure of 3000 psig and outlet pressure of 15 psig with 30 psig gauge and 1/4 Inch FPT…

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

The Agilent Technologies replacement membrane tube measuring 300 mm has female locking luer for argon humidifier. It is compatible for use with ICP-MS (G8400-60700), ICP-OES and MP-AES (G8010-60346). Application: For Argon Humidifier. Used with ICP-MS (G8400-60700), ICP-OES & MP-AES (G8010-60346) …

Precision-designed and manufactured, large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies vacuum pump fluid acts as a coolant in a Leybold roughing pump and helps in the smooth lubrication of the pump. Application: For Leybold Roughing Pump, For Elan 9000/6Xx00/DRC. Suitable for PerkinElmer Elan ICP-MS This product is only available to U.S. Domestic…

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

The Agilent Technologies two-stage oxygen gas regulator with PTFE seals and stainless-steel diaphragms has a brass body which provide excellent strength and durability. It has CGA580 inlet with maximum pressure of 3000 psig and outlet pressure of 15 psig with 30 psig gauge and 1/8 Inch Swagelok…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

The Agilent Technologies basic consumables kit consists of 12 easy-fit peristaltic pump tubes for sample (2-stop, white/white, 5005-0020), 12 waste (3-stop, yellow/blue, 5005-0022), 12 internal standard (2-stop, blue/orange, 5005-0021). It also includes PFA sample tubing measuring 0.5 mm I.D x 1.6…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Oil mist filter for DS402 rotary vane pump. Replacement oil mist filter only, does not include tubing or clamp. Replace oil mist filter every 12mths along with rotary pump oil. Application: For DS402 Rotary Vane Pump. Replacement Oil Mist Filter Only, Replace Oil Mist Filter Every 12Mths Along…

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

ICP peristaltic pump tubing is used together with an on-board peristaltic pump that controls the flow of solution into and waste out of the sample introduction system for ICP-MS. It can reduce the variation in uptake flow rate due to variation in physical properties of the solutions. Easy-fit peri…

ICP peristaltic pump tubing is used together with an on-board peristaltic pump that controls the flow of solution into and waste out of the sample introduction system for ICP-MS. It can reduce the variation in uptake flow rate due to variation in physical properties of the solutions. Easy-fit peri…

The peristaltic pump tubing has to be washed prior to use. The common way is to run about 5% HNO 3 (v/v) solution. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies basic connection kit consists of PFA sample tubing measuring 0.3 mm I.D x 1.6 mm O.D x 3 Meter, 2 union joints, 3 PEEK finger-tight fittings, two 10-32 male nuts measuring 1/16 Inch, APG remote cable and a gender changer connector D9S-FF. It helps in speciation analysis…

Many types of autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 and ASX 500 series used with earlier model instruments. Standard carbon fiber sample…

Precision-designed and manufactured, large-ori ce sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Nickel is a very rugged, long-lasting material for the majority of sample types, while platinum…

The Agilent Technologies replacement argon gas filter is suitable for use with all Agilent ICP-MS instruments. Application: Replacement Argon Supply Filter Suitable for All Agilent ICP-MS Instruments This product is only available to U.S. Domestic Customers. For research use only, not to…