Designed to provide a low cost chemical hood solution for protection of the operator and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in…

Frame Measures: 36" x 38" x 9" Chamfered Ends Rods are corrosion-resistant

Epoxy coated steel, belt drive, exhaust blowers for canopy hoods based on duct runs under 25ft and no more than 4 elbows. These exhaust blowers are designed to maintain between 80 to 100FPM.

Flat phenolic work surface for Universal and Clean Aire II hoods.

The Protector XL Benchtop Laboratory Hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. Protector XL Benchtop Laboratory Hoods are suitable for general chemistry applications. Features …

The Purair® Basic ductless Fume Hoods, ductless filtering enclosure, are designed to provide high level performance features at an affordable price.  Purair Basic ductless hoods are found in research laboratories, educational facilities, and forensic laboratories throughout…

The Purifier Axiom Class II, Type C1 is the first biological safety cabinet that can be used in a recirculating Type A-mode for standard microbiological work, or can be connected to an exhaust system to function in Type-B mode for handling hazardous chemical vapors or radionuclides. Because of the…

Protector PVC Perchloric Acid Laboratory Hood. 37.7" deep. Features heat-welded unplasticized PVC liner, built-in washdown system, integral work surface, drainage trough and 3/16" thick tempered safety glass vertical-rising sash with frame of powder-coated aluminum and PVC (glass is suitable for…

The patented Protector ClassMate Laboratory Hood is designed to meet the needs of instructional laboratories. Clear back and sides and taller front viewing window provide enhanced visibility for conducting chemistry demonstrations or observing students using the hood. The clear back also does not…

Require no outside ducting Non-sparking motor/blower Foot operated on/off switch Durable construction Hard rubber casters Adjustable blower speed An accessory to the Protector® VS™ Ventilation Station, the Filtermate filters the contaminated air generated and returns purified air to the…

The Universal Fume Hood is designed for light to medium duty fume removal, and offers such features as a sturdy dual wall construction, and a fully vertical sliding sash. It is completely molded of fire retardant fiberglass. Thomas Numbers 1167M01-M04: Units do not have a blower and require a…

Compact, benchtop Fiberglass 30 Laboratory Hoods are designed for research, educational and clinical applications requiring small working space and efficient fume removal. The fiberglass liner is corrosion-resistant, durable, fire-resistant and light reflective. The smooth one-piece molded…

AirClean® Systems Dead Air Boxes provide a circulation free environment with UV light sterilization. The Dead Air Box is standard with a 0-15 minute mechanical timer for sterilization between amplifications. A safety interlock switch prevents exposure to UV light when sash is raised. …

Guardian™ Airflow Monitor senses and alerts the operator to low airflow conditions. From the monitor's face plate, the user can easily select and calibrate a set point between 30 and 250 fpm using a velocity meter and a screwdriver. Audible/visual alarm. Includes night setback, external alarm and…

Applicable Products: Fiberglass 30 Laboratory Hoods, Protector PVC Acid Digestion Laboratory Hoods, Protector PVC Perchloric Acid Laboratory Hoods, Protector Radioisotope Laboratory Hoods, Protector Perchloric Acid Laboratory Hoods, Protector XL Laboratory Hoods, Protector XLE Laboratory Hoods,…

Labconco offers a variety of accessories to customize your Biosafety Cabinet, Procedure Station, Clean Bench or Filtered PCR Enclosure. Thomas No. 1197K28 Ultraviolet Lamp Applicable Products: PuriCare Procedure Stations (pre-2008), Purifier Cell Logic & Cell Logic+ Biosafety…

Protector Premier I-S Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire…

Ductless Fume Absorbers are configurable as Horizontal or Vertical Flow. 115V 60Hz, North American Cord set (unless specified). Includes Carbon Filter.  Fume Box™ ductless enclosures are designed to protect the user from chemicals, vapors or powders during low-volume chemical…

This fume hood features a one-piece shell molded of polyethylene plastic with a clear acrylic sash that slides on inside tracks. Sash can be set in an open, closed or intermediate position; remains open slightly when in closed position to facilitate continuous air flow Front opening is…

Standard or extra height models 2-, 3- or 4-feet wide Protector XVS Ventilation Station provides user protection by keeping powders and fumes contained during light duty, fume-generating or weighing procedures. Patented features include air foil with Clean-Sweep openings to enhance airflow and…

Air Science Spill Tray fits Purair BASIC Ductless Fume Hoods

Scienceware® Clear View fume hoods with 3 position sash offer 360° visibility while letting you safely vent noxious or potentially hazardous fumes and dust. Clear polycarbonate construction has excellent durability Sash can be completely lowered or fixed at two height positions …

Promotes a safer, healthier workplace Mountable vertically or horizontlly Includes two heavy duty extractor arms Easy access enables fast change of filters Captures and removes contaminants at the source by collecting and filtering smoke, dust and odors. Perfect for use during…

XPert Filtered Balance Stations are designed to protect the user during powder weighing operations. Ducting to an outside blower is required. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal…

Ductless polypropylene fume hood with AirSafe automatic safety controller, vertical safety glass sliding sash, and vapor proof fluorescent light. Hood requires a minimum of three like filters for operation, not included in price. 110V AC.

The MY-2400 is a compact, basic ductless solution for capturing fumes and particulate during routine laboratory analysis. This lightweight model is constructed from durable construction material that provides excellent durability in typical laboratory environments. The clear base section is…

AirClean® Systems Type C PowderSafe ductless balance enclosures incorporate the airflow dynamics and HEPASafe™ features of the PowderSafe Type B with the user-friendly features and chemical fume containment capabilities of an AirClean Systems ductless fume hood. Thermally-fused…

The Protector® Echo™ Filtered Fume Hood combines the trusted filtration of Erlab’s Neutrodine® Unisorb Filter with the quality, innovation and energy-efficient fume hood designs of Labconco's unparalleled engineering to create an adaptable fully-featured fume hood that…

Clean Aire II Fume Hoods are a Class 1 ductless hood workstation with activated Carbon Filtration for fumes, odors, non-hazardous chemical vapors. This is a self contained ductless hood unit, equipped with integral carbon filter, vapor proof light, vertical sash and controls, and completely molded…

The Protector® Airo™ Filtered Fume Hood has a compact design that avoids potential challenges of existing lab conditions while still providing space, utility and options of a traditional hood. It features all of the characteristics of Labconco Protector Hoods including the patented…

Protector Pass-Through Laboratory Hoods offer sashes on two sides allowing operation on either side of the fume hood. An audible alarm sounds to prevent simultaneous opening of both sashes. With unobstructed visibility from either side, this hood is ideal for conducting chemistry demonstrations. …

Simpler to use, Safer to operate Erlab’s CaptCaptairStore Filtering Chemical Storage Cabinets are designed with advanced carbon filtration, Flex Technology and a simple, innovative way to keep you safe. With the push of one button, it will set you free of limitations in order to focus…