The Omni TH is a powerful Tissue Homogenizer designed to handle a wide range of laboratory samples from 0.2 mL to 100 mL in volume. The TH tissue homogenizer can usually process a tissue sample in less than 30 seconds and is compatible with a wide variety of generator probes for flexibility in…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

Homogenize most samples in under 30 sec. For volumes from 100µl to 250ml Supplied with both 5mm and 7mm generator probes Benchmark’s new handheld homogenizer, the D1000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with…

The BeadBug™ is a high energy benchtop homogenizer that sets the performance standard for personal sized cell disruption and lysis instruments. Simultaneous homogenization of up to 3 samples takes place (often within 45 seconds) inside the disposable 2ml screw cap microtubes. The…

The Mini-Beadbeater-96 is high-energy, high-throughput cell disrupter. In a single 1-3 minute batch run it handles up to 192 samples using a deep-well microplate format or 45 samples in 1.5 or 2 ml screw-cap microvials. In a busy day thousands of samples can be processed. The MiniBeadbeater-96…

The Micro Tube Homogenizer System features an advantaged micro tube that is specially matched to a micro pestle which provides the tightest tolerances between the tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large…

Bead beater ideal for lysing, extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. Supplied with holders to hold vertically 12 microtubes (1.5 or 2.0ml), 6 15ml tubes, or 3 50ml tubes, and 12 microtubes (1.5 or 2.0ml) horizontally. Beads are also…

Balls made of Type 316 stainless steel For bead beating applications Use with Bead Genie™ and Disruptor Genie® Can be cleaned and reused

Fast, efficient bead homogenization Process up to 6 samples simultaneously For all sample types, from soft tissue to bone Accepts 2.0ml or 5.0ml tubes Full range of bead materials and sizes are available The BeadBug™ 6 joins the large capacity BeadBlaster™ 24 and…

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

Designed for low-volume applications, the SFX150 Sonifier® delivers up to 150 watts of power at 40 kHz for quiet operation. It’s the only cell disruptor and homogenizer of its type that includes a handheld converter designed for ergonomic comfort and easy control to simplify and speed…

Stand-disperser (High-End Line), flexible-use disperser with power cable, PC software, RS-232 / USB connection cable Applications with the highest demands for reproducibility and scaling up can be efficiently performed with this device. The fully digitized control and regulation…

The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…

This closed system tissue homogenizer (tube with pestle) is non-sterile and packaged in a bulk pack configuration.

Lyses, grinds and homogenizes a wide range of samples Process up to 24 samples simultaneously Powerful refrigeration system protects heat sensitive samples Full range of beads available The Benchmark BeadBlaster 24R is a high capacity, refrigerated bead homogenizer that meets a…

Zirconia/Silica has a density of 3.7g/cc (50% more dense than glass - good for spores and most tissues). Beads are sold in one pound bottles.

The Precellys Evolution is the most efficient and flexible bead beating tissue homogenizer on the market. Thanks to its powerful 3D precession movement associated to a high energy motor (up to 10 000rpm) and an exclusive tube locking system, the Precellys Evolution can homogenize any sample from…

/2 Design: universal geometry of two rows of teeth, suitable for a large spectrum of laboratory applications when emulsifying, suspending, dispersing, or extracting samples. /4 Design: geometry with two rows of teeth for more shear allowing for finer extractions, emulsions and suspensions. …

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

PRO Scientific CBD Homogenizing packages are perfect for homogenizing of various cannabis solutions and oils. High shear homogenization of sample physically breaks down your particle size creating a uniform, homogenous solution.  This is vital for ensuring consistent dosing and potency as…

Powerful stand-disperser (Ecoline), flexibile-use disperser PT 10-35 GT features high drive power and a sleek design. With its large reserve capacity, it can be used for sample with large volumes as easily as preparing samples with smal volumes. BENEFITS Ergonomics Easy…

Thomas No. 1204B80 Recommended for 0.5ml,1.5ml, and 2ml tubes Best used with sample volumes below 0.4ml Compatible with all homogenizer models Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible…

The BioRotator-6 is a compact, rotational mixer used for a wide variety of mixing needs. The mixing angle is fully adjustable and six mixing speeds are provided. When adjusted with the rotation axis of the motor in a horizontal position, a roller tube attachment (792E) permits hybridization and…

The FastPrep-24 Classic instrument is a high-speed benchtop homogenizer offering the ultimate in speed and performance for the lysis of biological samples. Simultaneous homogenization of up to 24 samples takes place within 40 seconds. * Thorough and quick lysis of any tissues and cells *9…

A compact, low cost screw-press designed to pulverize 50-500mg of hard, brittle material such as bone or teeth. If fresh tissue is used, the sample is cooled in liquid nitrogen to make the tissue hard and brittle, inserted into in the pre-cooled pulverizer 'nut' and then crushed by manually…

Adapter is required for all Mixer Style Homogenizer Product Line generator probes. (One adapter is included with each Omni Mixer, Omni Macro, and Omni Macro-ES)

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

CoolPrep 24 X 2 mL Adapter is a cryogenic adapter which allows simultaneous lysis of 24 x 2 mL samples. Based on passive temperature control technology, the CoolPrep Adapter ensures an efficient cooling of the samples as dry-ice, placed into the moving tray, is in direct contact with the sample…

Cooling system to protect heat sensitive samples during homogenization The BR-Cryo Cooling Unit is compatible with the Bead Ruptor 24 and is designed to prevent the increase of sample temperature during the homogenization process. Friction generated through the bead milling process generates…

Large scale sample holder with All-Metal construction. The TeenPrep All-Metal Adapter holds 12 x 15mL Lysing Matrix Tubes. This is the strongest FastPrep-24™ adapter, intended for the most difficult and long-lasting lysis applications. Due to its metal construction, it can be continuously run…

Tungsten Carbide has a density of 14.9g/cc. While very dense, this bead is not recommended for biopreps. It will leave your prep dirty. Note: These beads impart a brown-gray color to homogenates. This inert, colloidal tungsten-carbide can often be removed by centrifugation or filtration.

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…