Process materials up to 9 Mohs Closed grinding chamber with Plexiglas window Timed or continuous operation Wet or dry grinding Mortar grinders reduce inorganic and organic substances to analytical fineness. They can mix and homogenize powders, suspensions and pastes. Grinders…

Speed range of 6,000 to 18,000 rpm Gentle, rapid size reduction via 2-step process High throughput Quiet, reliable, easy-to-clean The ZM 200 Ultra-Centrifugal Grinding Mill rapidly reduces soft to medium-hard and fibrous materials to analytical sample size. Grinding takes…

Perfect Grind for the Perfect Pre-Roll! Designed to optimize grinding and extraction, the Revolution 2.0 commercial cannabis grinder delivers a consistent, homogenous grind, optimal for evenly packed rolls, extractions and higher potency of the product.  The Revolution 2.0 employs a low heat,…

Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…

Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a…

No sharp edges Stainless steel construction Easy-to-use Sample is placed in mill cavity, the two mill halves are pressed together and rotated in opposite directions. Mill is durable and corrosion resistant. Clearance between cutting heads is adjustable; factory preset at…

Sand is specially graded natural silica sand graded to retain 98% on a No. 100 (150µ) sieve, 75% on a No. 50 (300µ) 30% on a No. 40 (425µ) and 2% on a No. 30 (600µ). Specific gravity is 2.65 Packed in 50 lbs. (22.7kg) bags

The BioVortexer is a lightweight, battery powered unit designed to be used with microcentrifuge tubes. Centrifugal pellets, precipitates, and other solids are completely dispersed in seconds by a combination of mechanical and vortex action. A new polypropylene stir rod is used with each sample. …

These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…

Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are “total” not “annular”.

The Humboldt, Small, Riffle-Type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such…

Selected to give the best fit to Pellet Pestles, Thomas 3411D75 series Constructed of autoclavable polypropylene Available in blue or natural color

The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent. Pestle is rounded to conform to bottom of grinding chamber and is either…

These tapered tissue grinders have an improved design, which incorporates a longer tapered surface on both the mortar and pestle. The conical surface allows initial size reduction followed by passage through the cylindrical section for the final homogenization step. Grinding efficiency is improved,…

Stand Assembly for Ultra EZgrind™ Tissue Homogenizer

Biodegradable Plastic Cylinder Molds for single-use applications are non-absorptive and molded as single piece units for dimensional uniformity. Rugged molds have unlimited shelf life and are weather-resistant, but contain a unique additive that allows microbes present in landfills and composting…

For grinding chemicals, drugs and gums, as well as heavier minerals in the dry state Distance between grinding plates is adjustable to vary fineness of the product Includes one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at…

These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…

Sand is specially graded natural silica sand to pass a No. 20 (850µ) sieve. Specific gravity is 2.65 Packed in 50 lb. (22.7kg) bags

The Denville Ultra EZgrind™ Homogenizer Line is perfect for customers continually homogenizing small volume samples with little variation in sample size. 125 Watt Lab Homogenizer with 7mm Steel Generator Probe

Double-ended pestle is perfect for use with the Scienceware® 12-Well Tissue Disaggregator. The flat ends effectively press soft tissues through the diaggregator’s screens thereby disrupting the organ structure and producing cell isolates. Double-ended design for a wide variety of…

Simple operation Large capacity Threaded piston minces 10 to 50 grams of non-fibrous tissue. As the piston crank is turned, tissue is extruded through a sieve screen at the bottom. Clean up is simple with non-abrasive detergent and water. Includes three sieve screens with pore diameters…

Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8,…

Precision large and small tissue grinder systems Ready-to-use Packaged in a sterile peel pouch Completely disposable Grinder tube doubles as a specimen container for transport and storage. Protective sleeve helps to contain aerosolization created during grinding. Tissue is…

The DR 100 vibratory feed is for pourable bulk materials and combines an ergonomic design with the versatility to perform everyday functions smoothly and accurately. Performance features include feed grain size <2 mm (DR 100/15), <6 mm (DR 100/40) and <12 mm (DR 100/75). Hopper volumes…

Re-suspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles can be hand operated or motor driven Autoclavable types available Ideal for cell and tissue culture preparation Choose the best pellet pestle for your applications RNase-, DNase- and Pyrogen-free …

High Shear Mill pulverizes chemicals, pigments, wood, bones, paper and more Easy access for sample recovery and cleaning Microswitch prevents operation while lid is open Powerful dual speed motor, 14,000/18,000 rpm 60 minute timer, speed selector switch and amperage…

Borosilicate glass Especially for soft tissues Stainless steel rod is long enough to chuck into a suitable drive motor

Thomas number 3371J15 is included with motor-driven grinder Thomas numbers 3371J25 and J30 are replacement feeds for 3371J15 and J20 grinding units Thomas number 3371J35 grinding plates can be used in both the hand and motor-driven grinders

Borosilicate Glass Finely ground pestle and tube Teflon® spacer aligns pestle and reduces aerosoling of product Matched sets

These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the…