Supplies AA General

Compare Tool

Select up to 3 products

1 - 32 of 353
Sort
View
Show
  • Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Agilent Technologies

    Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Agilent Technologies

    Agilent burner heads for PerkinElmer PinAAcle/AAnalyst flame AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Nitrous Oxide-Acetylene or Air-Acetylene Operation, For Pinaacle & AAnalyst…

  • Agilent Technologies

    Easy-fit inert torch, for Agilent 4200 MP-AES, for use with HF digests. Not compatible with the earlier model 4100-MP-AES. Supplied with an inert alumina injector, PTFE ball joint coupler and inert torch clamp. Recommended for use with the inert double pass spray chamber (p/n G8010-80034) - not…

  • Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Agilent Technologies

    The Agilent Technologies mercury absorption cell is suitable for use with VGA 76/77 continuous-flow vapor generation accessory. Application: For VGA 76/77 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

  • Agilent Technologies

    The Agilent Technologies 1B connector with nipples is compatible to use with 2.4 to 3.2 mm OD tubing. Application: For 2.4 to 3.2 mm id Tubes, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use…

  • Agilent Technologies

    Simple ordering of peristaltic pump tubing for your MP-AES instrument saves time when provisioning your routine instrument maintenance. Agilent top-quality peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Whether it is PVC, Solvaflex, FPM Viton, or Marprene,…

  • Agilent Technologies

    The Agilent Technologies two-way T-piece assembly is used to adjust and conforms neatly to the PEEP control knob during surgical procedures in hospitals. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    The Agilent Technologies nebulizer cleaning wire is suitable for use in Mark V, VI and 7 spray chambers. Application: For Mark V, VI & 7 Spray Chambers This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    The Agilent flame AA spray chamber has an adjustable glass bead positioned in front of the nebulizer venturi, which breaks up the aerosol droplets and provides the operator with control over the aerosol concentration. Removable twin-head mixing paddles twice reverse the direction of aerosol…

  • Agilent Technologies

    The Agilent Technologies tube split ring kit is suitable for use with SPS-3 model. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample Tubing, For PerkinElmer, FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only…

  • Agilent Technologies

    Agilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. …

  • Agilent Technologies

    A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each model autosampler is…

  • Agilent Technologies

    Agilent mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems are equivalent to genuine mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems. With these supplies you can be confident that it will integrate…

  • Agilent Technologies

    The Agilent Technologies transducer assembly and O-ring is suitable for use with chromatography system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    The Agilent fully automated modular VGA 77 vapor generation accessory is used with Agilent flame AA systems to. enables rapid trace level determinations of mercury and other hydride-forming elements at parts-per-billion (µg/L) concentrations using the vapor or hydride generation technique. The VGA…

  • Agilent Technologies

    Agilent graphite furnace AAS electrodes provide good electrical contact, ensuring you achieve optimum performance with maximum tube life. Application: For GTA 96/100/110 Zeeman This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    The Agilent Technologies zeeman HGA contact cylinder is a perfect accessory for any THGA graphite furnace systems. Application: For Zeeman HGA 300/600/700/800/850/900 Furnaces, PerkinElmer GFAAS Systems This product is only available to U.S. Domestic Customers. For research use only, not…

  • Agilent Technologies

    Agilent adapters with internal thread, adapters with external thread, and connectors for PerkinElmer FIMS/FIAS systems are equivalent to genuine adapters and connectors for PerkinElmer FIMS/FIAS systems. You can be confident that these adapters will integrate seamlessly with your PerkinElmer…

  • Agilent Technologies

    The Agilent Technologies complete cell and window is compatible to use with cells and Hg lamps in any PerkinElmer instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

  • Agilent Technologies

    The Agilent Technologies 1000 mL rinse bottle is suitable for use with 97/100/120 PSD (programmable sample dispenser) models. Application: For PSD-97/100/120 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…

  • Agilent Technologies

    Agilent mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems are equivalent to genuine mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems. With these supplies you can be confident that it will integrate…

  • Agilent Technologies

    The Agilent Technologies 1 ABS AA certified filter is suitable for use with chromatography or spectrometry system models. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    The Agilent Technologies flame AA sampling probe assembly has a sturdy stainless steel construction for more strength and the PTFE lining delivers optimum results. Application: For AS-90/90A/90plus/91/93plus/S10 Autosamplers, PerkinElmer Autosamplers This product is only available to U.S.…

  • Agilent Technologies

    The Agilent Technologies graphite tube removal tool is suitable for use with graphite furnace. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

  • Agilent Technologies

    Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other…

  • Agilent Technologies

    Agilent mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems are equivalent to genuine mixing/separation assembly, mixing block and gas/liquid separator for PerkinElmer FIMS/FIAS systems. With these supplies you can be confident that it will integrate…

Compare Tool

Select up to 3 products