Specialty Flasks
-
Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks.
-
Round bottom, HEAVY WALL two neck flask with standard taper outer joints on both the center neck and angled side neck. Flasks with 10/30 side neck are for use with CG-3506 thermometers. The 29/26 center neck flasks have a groove tooled just below the grind to aid in clamping of the flask.
-
Glassblowers Flask Blanks, Round Bottom
ChemglassBlanks for fabrication of single or multi-neck round bottom flasks. NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Heavy Wall blanks are 30% heavier than our standard CG-618 series. Blanks are used in the fabrication of single or multi-neck round bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.
-
Flask, Trypsinizing
ChemglassManufactured from Type 1 Class A borosilicate glass with FOUR deep side baffles for optimum agitation during trypsinization. Flask comes with beaded, break-resistant lips and 50mm OD necks. Sold 1 per case.
-
Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
Cylindrical Reaction Vessels with Flat Flange
SP Wilmad-LabGlassThese borosilicate glass cylindrical reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing…
-
Round bottom, HEAVY WALL, three neck flask with standard taper outer joints on the center and side necks. Lower outlet is a CG-424-05, 4mm straight bore PTFE stopcock.
-
Flask, Reaction, Cylindrical
Ace GlassCylindrical, heavy wall reaction flask with extra thick flat, ground flange. Without constriction at top to facilitate introduction/removal of material and allow for ease of cleaning. Available in 1L to 4L capacities, flat bottom and round bottom, with
-
Biomass Flasks
GSC International, Inc.These biomass flasks are made from quality borosilicate glass. They all have a 24/40 ground glass bottom joint, but their top joints are all different sizes that are designed to fit our various distilling arms . The large top openings are ideal for inserting materials for distillation. …
-
Cylindrical Jacketed/Indented Reaction Vessels, O-Ring Flange
SP Wilmad-LabGlassThese borosilicate glass reaction vessels are jacketed with 1/2" hose connectors. They have four indentations for improved stirring and a tooled flat flange with an O-ring groove for a greaseless seal.
-
Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with
-
Scale-Up Series™ Bench-Top Reactor
Ace GlassAce Glass Scale-Up Series™ plain bench-top reactor base system includes the essential items needed to begin building a customized reactor specifically for your application. Reactors scale-up from 100mL to 6000mL on the bench and their geometry tr
-
Round bottom, HEAVY WALL flask with a standard taper outer joint and a side well to accept a thermometer. Top of thermowell is tooled to accept a #0 rubber stopper.
-
SYNTHWARE Reaction Vessel, Photochemical
Kemtech AmericaReaction Vessel, Photochemical, Synthware, Joint: 14/20 + 24/40, #50 Internal Top Thread, #7 Arm Side Thread, 500mL Capacity.
-
Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi
-
Head, Filter Reactor
Ace GlassReactor head, 60mm o-ring groove flange with (3) in-line 24/40 joints. Use with our 6384, 6386 and 6388 reactor bodies.
-
Ace Glass Freeze Drying Flask
Ace GlassComplete fast-freeze flask with snap-on rubber cap and 1/2-inch or 3/4-inch O.D. plain or valve adapter, compatible with all major brand freeze drying manifold valves. Borosilicate flasks are designed for ease of handling, faster loading. Uniform wall weight maximizes heat transfer while…
-
Rugged cylindrical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For…
-
Flask, Reaction, Cylindrical, Plain
Ace GlassRugged cylindrical reaction flask with Duran ground flange with o-ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE (PTFE encapsulated silicone) o-ring. Plain silicone o-rings are also available (see 7855). For reaction heads, see 6528 or 6530. For…
-
Kjeldahl shape facilitates heating and stirring while permitting easy transfer of liquids or solids. Lower portion of flask fits standard heating mantles. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap®…
-
CELLine Bioreactor Flasks
Argos TechnologiesCELLine Flasks are ideal for monoclonal antibodies and expressed recombinant cellular protein production. Viable in vitro alternative to using mouse ascites, standard cell culture or tissue culture products. Bioreactors utilize innovative membrane technology to separate the cell cultivation area…
-
Instatherm Reaction Flask
Ace GlassThis integral heating element eliminates the local super heating com- monly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. The response is raoid and accurate the attention can be directed to contents instead of the pot. supplied with cord. Flask…
-
Flask, European Style
Ace GlassEuropean style, tapered walls with shallow bottom for more efficient magnetic or mechanical half-moon shaped paddle stirring. Supplied with center neck, two side necks. Available with 1 additional #7 Ace-Thred or 2 additional #7 Ace-Threds complete wit
-
3 Neck Reaction Vessel/Kettle Cover
SP Wilmad-LabGlassFeaturing a center neck and two side necks with full length outer Standard Taper joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or…
-
Disposable Side-arm Assembly
CorningCorning Spinner Flask Aseptic Transfer Caps will enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10?6 SAL), individually double bagged and fit the side arms on 3L Corning Disposable Spinner Flasks (Cat. No. 3563).…
-
Flask, Two Necks, Pear-Shaped
Ace GlassPear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.
-
Peptide Synthesis Vessel, Solid Phase, Synthware, Capacity: 25-500mL Available, Disc Porosity: Medium or Coarse available, Frit OD: 25-80mm available, Thread Size: 25 and 32 available, Joint Size: 24/40 Inner with drip tip, Hose Connection: 8mm, Supplied with PTFE-lined screw cap and T-bore PTFE…
-
SYNTHWARE round bottom two neck reaction flask with standard taper outer joints and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.
-
