Boiling Flasks
-
PYREX VISTA flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The flat bottom boiling flasks are designed to ASTM E-1403.
-
Round Bottom Two Vertical Neck Flasks
SP Wilmad-LabGlassWith two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.
-
-
SYNTHWARE Round Bottom Flasks
Kemtech AmericaSYNTHWARE round bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.
-
SYNTHWARE Round Bottom Angled Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
SYNTHWARE Round Bottom Vertical Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Flask Boiling Flat Bottom 250ml
DWK Life Sciences (Kimble)KIMAX boiling flask with a short joint neck. Designed from ASTM Specification E1403, Type I, Class 4 requirements.
-
Angled Two Neck Round Bottom Flasks
DWK Life Sciences (Kimble)Two-neck heavy wall flask with Standard Taper outer joints Side neck is angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Heavy Wall 10L Round Bottom 3-Neck Flasks
Across InternationalAi 10L heavy wall, 3-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and one 24/40 center neck. Glass material: high borosilicate glass 3.3.
-
-
Single Standard Taper Neck Heavy Wall Round Bottom Flasks
DWK Life Sciences (Kimble)Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.
-
-
Round Bottom Boiling Flasks, SJ Joint, Heavy Wall, with Plastic Safety Coating
DWK Life Sciences (Kimble)KimCote® plastic-coated single neck flask with a SJ socket joint. Useful as rotary evaporator condensate collection flask or as a replacement for European designation KS 20/35.
-
SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Flask, Round bottom, Two Neck
Ace GlassRound bottom, two neck flask. Side neck is angled. Available in standard wall for more rapid heating or heavy duty for mechanical shock resistance.
-
Heavy wall, wide mouth flask with a GL80 glass thread and a 24/40 connecting adapter. Flasks have a heavy wall for vacuum applications and are balanced to prevent run-out during rotation. Unique design makes it easier to handle highly viscous liquids, powders, and solids. The large opening permits…
-
Flask, Three Necks, Angled
Ace GlassRound bottom flask, three necks with angled sides. All joints are standard taper. Available in standard and heavy wall.
-
Flask Boiling Flat Bottom 500ml
DWK Life Sciences (Kimble)KIMAX® boiling flask with a short Standard Taper joint neck. Designed from ASTM Specification E1403, Type I, Class IV requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Flask 1000 ml
CorningThis specially designed PYREX® 1L boiling flask is a replacement part for the PYREX® Cyanide Distilling Apparatus (No. 3350-C).
-
Borosilicate Glass Round Bottom Boiling Flasks
United Scientific SuppliesBorosilicate Glass Round Bottom Boiling Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack.
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Round bottom flask with four necks arranged 3 in-line and one #7 Ace-Thred neck (ideal for suspending a thermometer or probe) at 90 degrees. The 500ml and 250ml sizes have angled side necks while the larger sizes feature vertical necks. Available in he
-
Flat-Bottom Flasks
GSC International, Inc.These quality flat bottom boiling flasks are made from heat-resistant borosilicate glass, and have narrow mouths, tooled top finishes, and thick walls. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including lead, which are known to the State of California to…
-
-
Flask, Round Bottom, Single Neck
NDS Technologies5 mL 14/20 center neck Single neck round bottom flask with an outer joint.
-
Class A Mixing Bulb Style Wide Mouth Flasks with Standard Taper Stoppers
DWK Life Sciences (Kimble)Wide mouths allow easy access into these mixing bulb volumetric flasks for applications such as dissolving tablets and other solids. Mixing bulb in neck accommodates approximately one tenth of the flask’s total volume and is designed to aid in dissolving or mixing the contents of the…
-
-
Flask Boiling Round Bottom 250ml
DWK Life Sciences (Kimble)KIMAX® round bottom boiling flask with a short neck and a medium length Standard Taper joint Designed from ASTM Specification E1403, Type II, Class III requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Borosil® Round Bottom Boiling Flasks have uniform wall thickness for even heat distribution. Constructed from stress-free borosilicate. Borosil® Boiling Flasks are heat-resistant. Built to withstand the demands of the modern lab, each flask has a flame-polished, beaded rim for added…
-
PYREX® Long Neck Boiling Flask
CorningThese 100mL PYREX(r) round bottom boiling flasks have long necks with tooled mouths and take a rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
SYNTHWARE Round Bottom Flasks with Spherical Socket Joints
Kemtech AmericaSYNTHWARE round bottom boiling flasks with spherical socket joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness. These flasks can be used as replacements for the collection flask on rotary evaporators.
