Peel-away funnels with reservoirs and CN membranes Nalgene 130 47mm CN membrane Complete pre-packaged sterile assemblies Stable wide-base design and 150 mL volume size for larger sample and rinse procedure volumes “Squeeze and twist” polypropylene design…

It is mainly used in tissue culture media and biological fluids for separation and purification of large volume samples. The whole set includes membrane diaphragm, a graduated, transparent polystyrene funnel connected to a receiving bottle by a connector. The disposable vacuum filter utilizes a…

Corning is introducing a new 0.1µm square filter system with a Polyethersulfone (PES) membrane for mycoplasma removal. These new 1000mL Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The new system consists of a 1000mL polystyrene…

Designed to collect the filtrate directly into a standard laboratory bottle Connection to the bottle is made with a polybutylene terephthalate (PBT) cap and a PTFE-faced silicone sealing ring Glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

A ready-to-use and disposable filtration unit for microbiological analysis of beverages and in-process water Convenient and easy to use Sterilized, ready to use devices saves time and expense Test beverages and other liquids faster and easier with 55-Plus monitors from Millipore. These…

Membrane filtration, General microbiological analysis

Extremely low protein-binding Wide bottle opening for easy pouring Individually wrapped, peel-open packaging Engraved graduations Connector fits multiple hose diameters Certified non-pyrogenic & gamma irradiated Filtration tops fit on 45mm neck bottles 45mm neck size …

Filtration adapter assembly makes it easier to connect standard 47 and 90mm filtration assemblies with stopper connections to a standard laboratory bottle with a GL45 thread Replaces the stopper to make the connection to the bottle A GL32 PBT cap with a PTFE faced silicone sealing ring makes…

Assembly consists of stainless steel funnel, funnel base, and filter support; anodized aluminum locking ring; nylon lockwheels; PTFE gaskets; silicone stopper; grounding wire. Holder is autoclavable but not with filter in place.

Ideal for HPLC solvent/sample filtrate recovery, as well as filtration of corrosive liquids for particulate contamination analysis The flask and fritted glass base are joined with a Standard Taper 40/35 ground joint, so liquids will only come in contact with borosilicate glass Vacuum…

PUREGRIP® HPLC solvent reservoir cap and bottle assemblies offer the safest and most ergonomic lab safety solution in the industry. These assemblies come with patented VersaCap® tech-nology, a Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2μm PTFE Filter for…

Process larger volumes of liquids for analysis of particulate or biological contamination Wheaton-33® low extractable borosilicate glass Unit includes a coarse porosity fritted glass filter support base, an aluminum clamp and a 300 mL glass funnel Screen is removable in…

It is mainly used in tissue culture media and biological fluids for separation and purification of large volume samples. The whole set includes membrane diaphragm, a graduated, transparent polystyrene funnel connected to a receiving bottle by a connector. The disposable vacuum filter utilizes a…

Using 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base and…

Low-profile design; polystyrene Three membrane materials available: Cellulose Nitrate (CN), Surfactant Free Cellulose Acetate (SFCA) and Polyethersulfone (PES) Membrane diameter 50 mm with surface area 17.3 cm 2 Provide fast flow rates Graduations on upper and lower chambers, padless…

Nalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron…

Using 47mm membranes for filtering corrosive solutions, particulate removal from HPLC solvents, and filtration analysis with solid phase extraction disks. Support base has removable 47mm stainless steel support screen for use with viscous or proteinaceous solutions. Complete assembly includes a…

Biosart 100 Monitors: Sterile, ready to use disposable funnels designed to be placed directly onto a vacuum manifold, eliminating the cleaning and sterilization required of reusable funnels. Each monitor includes a membrane filter and cellulose pad into the funnel unit. After filtration, the 100 ml…

It is mainly used in tissue culture media and biological fluids for separation and purification of large volume samples. The whole set includes membrane diaphragm, a graduated, transparent polystyrene funnel connected to a receiving bottle by a connector. The disposable vacuum filter utilizes a…

Corning® Vacuum Filter/Storage Bottle Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The systems consist of a 1000mL polystyrene receiver bottle and filter funnel with a 0.22 µm pore 54.5cm² cellulose nitrate membrane…

This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly  

PUREGRIP® HPLC solvent reservoir cap and bottle assemblies offer the safest and most ergonomic lab safety solution in the industry. These assemblies come with patented VersaCap® tech-nology, a Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2μm PTFE Filter for…

Low-profile polystyrene housing 50 mm Supor® machV PES membrane 115 mL capacity The 524 is an economical asymmetric polyethersulfone filter unit that is suitable for small-volume benchtop filtration. Wide, stable base design. Pore size (0.2 µm) and membrane type are printed in easy-to-see Blue…