I.C. 16oz. Static Dissipative Catch All container can be used for storing pens, pencils and other miscellaneous items. This ESD Static Dissipative bottle has an average surface resistivity of 10^9 to 10^10 Ohm/sq. and will dissipate a static charge of +/- 5000V in less than two seconds. 

Contains 40 - 3mL LDPE (Low Density Polyethylene) bottles Assembled with dropper tip and cap attached to bottle Average drop size is 44uL +/- 6uL Packaged in a reusable plastic case Extended controlled dropper tip dispenses one drop at a time Alphanumerical indexing of contents…

Measure Liquids from 5mL to 25mL Just By Squeezing the Bottle Squeezing forces the desired volume of liquid through the tube and into the cup. When pressure is released, excess fluid returns into the bottle for spill free pouring. Measure liquids from 5ml to 25ml just by…

These amber boston round flint glass bottles include screw cap with dropper assembly are designed for general use. The glass is non-porous, which allows for easy cleaning or autoclaving. The amber color helps protect light sensitive materials.

Bottle made of low density polyethylene Manufactured to strict quality control standards to ensure the best product for your application Available in 1, 3, 6, 7, 10, 15, 30, 60, or 120mL Packaged in cases of 100 or 1000 Dropper tip caps and tips sold separately

HDPE Flip Top Dispensing Bottles are translucent and impact resistant. LDPE Flip top dispensing bottles give you maximum squeezability. Ideal for dispensing small amounts of liquid.

Replacement piston/cylinder cartridges for seripettor and seripettor pro. Non-Sterile 10mL pack of 3

These low density polyethylene bottles are supplied with a ribbon applicator cap. The specially designed spout dispenses a free-flowing ribbon 5/16" wide. Ribbon may be adjusted from thin to thick spread by positioning on cap. The sealer top tongue completely seals the dispenser spout.

Always dispense just one drop at a time Nalge 2411 Of low-density polyethylene Captive spout in center of screw cap with closure Leakproof

Create a dropper bottle using a serum bottle with 20mm OD finish Dropper tip is made from PVC with PE cap Dispenses 40

Designed to protect contents from UV rays and ideal for light-sensitive products. Supplied with 20-400 GPI screw cap, bulb and plastic or glass dropper assembled on the bottle Manufactured from soda-lime glass conforming to USP Type III and ASTM E438, Type II requirements

The SCS 8 oz square bottle is mainly used for dispensing liquids or solvents with each pump. It is made of high quality HDPE material which ensures durability and long lasting usage.

Dropping bottles made of low-density polyethylene (LDPE) with screw-on dropper cap.

These Boston Round Flint Bottles include screw cap with dropper assembly are designed for general use. The glass is non-porous, which allows for easy cleaning or autoclaving.

This dropper bottle is made of translucent and low density polyethylene. Bottle can be used with or without dropper.

Safe and Precise Dispensing with No Loss of Reagent The Corning Bottle Top Dispenser is a universal solution for dispensing organic and inorganic liquids. The specialized airpurging and closed circuit system ensures no loss of reagent during dispensing, as well as when the device is not in…

Reduce the risk of contamination and maintain purity with the ULTREX™ bottle-top dispenser specifically designed for use with ULTREX™ II acids. This Teflon PFA or TFM (modified PTFE) constructed dispenser will eliminate leaching and airborne contamination, minimize waste and enhance…

Translucent color Very flexible with high impact strength Excellent for mild and strong buffers, good chemical resistance Raise the spout to dispense contents and depress spout to seal bottle

These low density polyethyelene dispenser bottles  feature a graduated clear PMP measuring cup that slides  up and down on the vertical polyethylene tube for  easy adjustment. The variation in height determines  the volume to be dispensed. The cup is filled by squeezing…

The dropping bottles and assemblies are used to store and dispense liquids, protecting them from contamination. The Bottles are Flint Glass, Clear, French Square.  

Dispense strong acids/alkalis, reagents and solvents with Thermo Scientific™ Nalgene™ Teflon™ FEP Drop-Dispensing Bottles, featuring excellent chemical resistance for dispensing virtually any chemical. Tethered spout cap snaps securely into place and won't pop off or leak when…

Yorker Top Bottles with Red Tip are supplied with LDPE Yorker cap and red tip attached. These bottles are squeezable yet impact resistant and provide an excellent moisture barrier.

Reduces spills and potential for breakage and injury Threads directly to bottles with GPS No. 38-430 or 38-400 threads This dispenser fits many 2.5 & 4 liters, 5 pint (80 fl. Oz), ½ gallon & 1-gallon jugs and bottles. To use, squeeze the smaller bottle and depress the top button to…

I.C. ESD Safe, Static Dissipative Fluid dispenser with a with Yorker Spout Cap. Has an average surface resistivity of 10^9 to 10^10 Ohm/sq. and will dissipate a static charge of +/- 5000V in less than two seconds. To be used with Water, Conformal Coatings and Solvents. Available in 8…

Supplied with PP closure, this 500mL Pump Dispensing Bottle is highly suitable for dispensing liquids and creams. Wide surface area is easily labeled with contents. Pump Dispensing Bottle is suitable for food grade products. Dimensions: 3” diameter x 8.25” height

Opaque brown High density polyethylene bottle protects light sensitive fluids Lasting-touch pump allows for quick one-handed dispensing - perfect for alcohol dispensing in working environments Wide neck opening with “Swing lid” - easy to fill, easily closes, reduces odors, and…

Polyethylene Nalge 2750 series Excellent chemical resistance Dropper bottles provide accurate, reliable and repeatable dispensing of various reagents. They are excellent alternatives to pipets and other dispensing devices. Dropper bottles are made from materials with excellent chemical…

Dropping bottles dispense small uniform drops of liquids when pressed lightly. Made from low-density polyethylene (LDPE).

Made from optically clear polystyrene Sterilized to SAL 10 -6 Corning polystyrene Storage Bottles are now available as closed system solutions. They are sterile and arrive individually double-bagged and peassembled. The preassembled transfer caps have two ports. One port ends in a…

These natural low-density Polyethylene dispensing bottles with nozzle feature a leakproof screw closure. The white polyethylene screw cap has a pivoting nozzle which can be raised to give a direct jet of liquid as the bottle is squeezed. When the nozzle is closed the passage for liquid is shut off…

Product Dimensions (l x w x h) : 0x3.1x10.875in Tall-style one liter cylindrical bottle supplied with spout and sealer caps. Sealer snaps on easily for tight seal. Spout openings are standard .030" and can be enlarged by cutting tip. Maximum temperature for low-density Polyethylene …

Locking pump will not leak when engaged - suitable for travel High density polyethylene suitable for many solvents Square shape provides stability and saves storage space Wide opening that is easy to fill Translucent - allows easy viewing of contents Height: 3.375 inches Dispenses…