General purpose gravity eluted column having a PTFE stopcock and reinforced beaded top. Column is constructed using MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom.

Roc HPLC columns are built to be the cornerstone for your LC lab. These solid, reliable columns are pressure rated for any 400 bar HPLC system and deliver the peak shape, reproducibility, ruggedness, and performance you demand for all of your conventional HPLC applications. An exceptional value,…

The use of SPE sample preparation can significantly enhance the robustness and reliability of many biological, pharmaceutical, forensic and environmental applications. Thermo Scientific™ HyperSep C18 SPE Cartridges feature a highly retentive alkyl-bonded phase for nonpolar to moderately…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Thermo Scientific™ HOT POCKET Column Heaters, Eluent Preheater/Precooler and COOL POCKET Chiller offer column heating or cooling in a compact, efficient design. Easy to install and use with a variety of column lengths up to 300mm (up to 150mm for short HOT POCKET model) Dual…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Extend the life of your analytical GC or GC/MS column by using a guard column reliably connected to you analytical column with our high performance capillary GC column connector, the Ultimate Union. New-technology Ultimate Union kits eliminate the “arts and crafts” involved in…

Phenyl Arylene polymer virtually equivalent to a (5%-Phenyl)-methylpolysiloxane Non-polar Very low bleed, suitable for GC/MS Exhibits inertness to active compounds Temperature limits are -60° to 325°/350°C Improved signal-to-noise ration for increased sensitivity and mass…

G-Biosciences present several empty low pressure chromatography columns. The columns and its parts are made of polypropylene which is chemically resistant to most of the commonly used reagents for chromatography. The end adaptors supplied with the column contain 10-32 UNF connections which are…

316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules Preassembled prior to shipment Internal 1/16" seats are compatible with Valco and Parker fittings

Thomas Scientific offers a large selection of ferrules made from PTFE, Graphite, Vespel® and Vespel/Graphite composites. Ferrule sizes refer to the size of the fittings into which they fit; they are not the diameter of the ferrule. (For example, 1/16" ferrules are 1/8" diameter.) …

A wide range to cover most applications Variety of materials and temperature limits for all applications For use in Thermo Scientific TRACE and Thermo Scientific FOCUS GCs and instruments from other manufacturers Contaminant-free in individual blister packs Temperature limit: 400°C

High resolution and rapid analysis of 24 amino acids Use tested for amino acid analysis Uses well known OPA and FMOC precolumn derivatization chemistry Easily automated using a detailed online, derivatization protocol available for use with Agilent 1100/1200 Autosampler The ZORBAX…

Bring the Lab to the Sample© with the Axcend Focus LC™, a new, portable high-performance liquid chromatograph (HPLC). The Axcend Focus LC is a shoebox-sized, nano-flow capillary solution that delivers greater sensitivity than other UV-Absorption-based HPLC systems, while using 1/500th…

DB-1ms is an excellent general-purpose GC column and ideal for GC/MS of active analytes commonly found in drug screening and environmental analyses. The Ultra Inert 1ms GC columns set the new industry standards for consistent column inertness and exceptionally low column bleed. These columns…

High loadability for maximum sample purification Easy scalability from 4.6 mm ID up to 50 mm ID for rapid method development High throughput 21.2 mm ID cartridges for fast purification Exceptional column stability and loadability up to pH 10 Agilent Prep LC columns are designed for…

Purospher® STAR RP-18 endcapped is the best choice for HPLC separation of basic, neutral, metal chelating samples or indeed any other format. Its outstanding performance and stability, allows a maximum flexibility in method development. Robust methods can be developed across the entire pH…

Ultra HPLC Columns The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications. …

Chromatographic column with integral reservoir at top, and 2 mm bore 1:5 taper PTFE stopcock plug at bottom. Opening at top is either 24/40 outer joint or opening for #3 stopper. Available with or without porosity B (70-100micron), fritted disc sealed in.

Reversed Phase (Non-Polar) 25% carbon loading Silica-based particles reduce pressure drop and increase flow reproducibility Average particle size of 45 µm and pore diameter of 60 Angstrom to reduce pressure drop and increase flow reproducibility Agilent’s…

polar phase; Crossbond polyethylene glycol Restek’s polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability, relative to competitive columns. Because of the increased stability produced by the bonding process, Stabilwax columns exhibit long column…

RR: Rapid Resolution 3.5 µm Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

For performing quick separations using a vacuum source. All funnels have a lower standard taper inner joint with a sealed in drip tip and an outlet for connection to a vacuum source. All sizes have a Coarse porosity fritted disc.

Similar to CG-1186 but with a sealed in COARSE porosity fritted disc to support column packing. Lower end of the column has a round bottom. Column is constructed using MEDIUM WALL TUBING.

Recommended application: Preparation of capillary columns As precolumns, whenever a larger contamination capacity is required Different deactivations are available: Methyl-Sil deactivated Phenyl-Sil deactivated CW deactivated

PSA (Primary Secondary Amine) is a weak anion exchange SPE sorbent used to extract strong acids and polyacidic compounds from aqueous samples. The weak anion exchange sorbent allows analytes to be eluted by eliminating the charge on the sorbent at high pH. The sorbent is supplied in the free base…

SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top spherical socket joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Joint: SJ 35/20 Note: since the chromatography column is used with…