Used for venting the Protector Acid Storage Cabinet through the SpillStopper Work Surface and into the fume hood. Includes one plastic vent tube assembly complete with 2" diameter threaded connection locknut, flexible tubing and vent extension

Black chemical-resistant work surface Dished or flat Dished surfaces feature are contoured to fit the dimensions of the enclosure and to contain spills. They are compatible with Xpert Balance Systems & Filtered Balance Stations, Purifier Class I, HEPA Filtered & Filtered PCR…

Protector Acid Storage Cabinets support all Labconco benchtop fume hoods and safely store and vent acids and other corrosive liquids. Features: two rear vent connection cutouts for venting the cabinet into a fume hood; durable epoxy-coated steel construction; corrosion-resistant polyethylene-lined…

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

These durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. …

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

SoLo Hydraulic Lift Base Stands are designed to support Purifier Logic Biosafety Cabinets. They are constructed of durable epoxy-coated steel and support a maximum of 700 pounds of equipment, excluding the weight of the safety cabinet. A built-in hydraulic lift is operated by a remote control with…

Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

Acid Storage Standing Height Cabinet are used to store acids and are lined with a chemically resistant polyethylene liner. Full height doors are lined with 1/8" thick polyethylene. Chemical resistant 3/16" thick molder polyethylene lining with coved corners and 2" lip at front…

Set includes four HD leveling casters rated at 550lbs.

Adjustable height accommodates persons sitting or standing Support Protector, Protector XL Benchtop, HOPEC IV. Basic fume hoods, Paramount Ductless Enclosures, Purifier Class I and HEPA Filtered Enclosures, Purifier Clean Benches, PCR Enclosures, Protector XVS Ventilation Station and XPert…

The CPU holder attaches via a bracket mount and swivels side to side. The heavy duty holder is adjusted 12" to 20" high and 3.5" to 9" depth.

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with full extension soft close slides, stainless steel wire pulls, and full overlay construction. Standing height BC30 4-drawer…

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with sliding framed glass doors, inset pulls, and inset construction.

These durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required.

Adjustable Height Mobile Base Stands and Adjustable Height Stationary Base Stands have permanently-mounted black laminate work surfaces and epoxy-coated steel frames. These base stands are designed to support Protector Glove Boxes and Precise Glove Boxes and may also function as tables for general…

16ga/304 stainless steel, removable front access panel, 4" backsplash, square edge on front and sides, temperature control mixing valve, Z-clips for wall mounting, includes stainless steel flat strainer drain, tail piece and p-trap, includes flexible stainless steel supply hoses.

Wall Cabinets are to be hung on a wall typically above a run of base cabinets. Wall cabinets come with two adjustable shelves and feature a flush bottom. Each wall cabinet includes a hanging rail.

Available with fixed feet or casters Telescoping Base Stands with Fixed Feet: provide support for a variety of Labconco fume hoods and enclosures. Stands have removable pins to adjust the legs to eight different heights in 1" increments from 27.5" to 34.5". Four fixed…

Protector Vacuum Pump Storage Cabinets provide an enclosed space for storing vacuum pumps. Durable, glacier white powder-coated steel construction complements laboratory casework and Labconco fume hoods. Features: a single, manual-closing, non-locking door with left or right hinge; one 115V, 60 Hz…

4ft Stand adjustable from 26” to 37”. Work surface height of  28” to 39”. Leveling Feet. Shipped flat. Esco offers Support Stands for all its cabinets that complement their style and appearance. These accessories provide a complete floor-standing system with…

Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC41 standing height base cabinet…

Suspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.

Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

Modular Workstation E1 includes: (2) 72" Lab Bench Half Height (36) with Casters (C), Ships Knockdown (K) (2) 72" Lab Bench Half Height Worktop - Epoxy Resin, Beveled Edge, Black (8) 36" F24 Powder Coated Steel Upper Shelves (4) 96" F11 Wall System Support Rails (4)…

These Chase Support Assemblies are adjustable height, floor mounted, support assemblies for work surfaces as well as drain line and plumbing chase for piping.

Formed of heavy guage cold-rolled steel. Designed to capture lip on top rear of wall cabinets for easy installation.

Application: Deck mounted mixing faucet with vacuum breaker and wrist blade handles for hot and cold water. Body: Forged brass. Valve Units: WaterSaver self-contained compression valve units with replaceable stainless steel seats. Handles: Forged brass wrist blade handles with…