Laboratory Cabinets & Casework

Wire super slide is made of nickel-chrome wire with clear protective coating. Only for use with 24" deep units. Designed to hold metro totes.

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with two drawers at 22"D.

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. Solid  door wall cabinet...

Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white...

Used for venting the Protector Acid Storage Cabinet through the SpillStopper Work Surface and into the fume hood. Includes one plastic vent tube assembly complete with 2" diameter threaded connection locknut, flexible tubing and vent extension

Sink Supports are required for undermount sinks.

Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons...

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with overlay front applique at 22"D.

Sitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons...

SoLo Hydraulic Lift Base Stands are designed to support Purifier Logic Biosafety Cabinets. They are constructed of durable epoxy-coated steel and support a maximum of 700 pounds of equipment, excluding the weight of the safety cabinet. A built-in hydraulic lift is operated by a remote control with...

Cabinet base molding is installed directly on the toe-kick of a base cabinet and is the final step in installing a lab to create a finished look. The base molding has a self-adhesive back for easy application.

Mobile Cabinet Work Surface is 3/4" thick black phenolic resin that provides a 1" overhang on the front and a 1/2" overhang at the rear and sides. It adds 3/4" to the over all height of the cabinet. There is a grip notch included under the front edge of the work surface to help...

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with full extension soft close slides, stainless steel wire pulls, and full overlay construction. Standing height BC30 4-drawer...

Adjustable height accommodates persons sitting or standing Support Protector, Protector XL Benchtop, HOPEC IV. Basic fume hoods, Paramount Ductless Enclosures, Purifier Class I and HEPA Filtered Enclosures, Purifier Clean Benches, PCR Enclosures, Protector XVS Ventilation Station and XPert Balance...

Cold Water Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.

Pipe Enclosures are used to provide a cover for pipes running from the ceiling to the work surface. This enclosure can be used for island or perimeter locations. They can support pegboards or water purification systems. The cover is pre-punched for attachment and is furnished in three sections for...

Formed of heavy guage cold-rolled steel. Designed to capture lip on top rear of wall cabinets for easy installation.

Modular Workstation C1 includes: (1) 24" D30 Standing Height 4-Drawer Base Cabinet (1) 36" E40 Standing Height 1-Drawer / 2-Door Base Cabinet (1) 48" E41 Standing Height 2-Drawer / 2-Door Base Cabinet (1) 36" A00 Steel Box Apron 22"D with Full Overlay Applique (1) 36"...

These durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required....

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC03 standing height base cabinet...

Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC40 standing height base cabinet...

Suspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.

Manual Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with hand crank so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons of...