EMD Logo
Material Safety Data Sheet
Section 1. Product and Company Identification
Product Name Zinc Sulfate, Heptahydrate Product Code 1.08881
Manufacturer
EMD Chemicals Inc.
P.O. Box 70
480 Democrat Road
Gibbstown, NJ 08027
Prior to January 1, 2003 EMD Chemicals Inc. was EM Industries, Inc. or EM Science, Division of EM Industries, Inc.
Effective Date
1/3/2006
For More Information Call In Case of Emergency Call
856-423-6300 Technical Service
Monday-Friday: 8:00 AM - 5:00 PM
800-424-9300 CHEMTREC (USA)
613-996-6666 CANUTEC (Canada)
24 Hours/Day: 7 Days/Week
Synonym Zinc Sulfate Heptahydrate, Zinc Sulfate
Material Uses Analytical reagent.
Chemical Family Metal salt.


Section 2. Composition and Information on Ingredients
Component CAS # % by Weight
Zinc Sulfate 7446-20-0 100


+ Section 3. Hazards Identification
Physical State and Appearance Solid. (Crystals or powder)
Emergency Overview CAUTION!
HARMFUL IF SWALLOWED.
CAUSES SEVERE EYE IRRITATION.
CAUSES RESPIRATORY TRACT AND SKIN IRRITATION.
MAY BE HARMFUL IF INHALED.
Routes of Entry Absorbed through skin. Dermal contact. Eye contact. Inhalation. Ingestion.
Potential Acute Health Effects
Eyes Extremely hazardous in case of eye contact (irritant). Inflammation of the eye is characterized by redness, watering, and itching.
Skin Hazardous in case of skin contact (irritant). Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering.
Inhalation Hazardous in case of inhalation (lung irritant). May be hazardous in case of inhalation.
Ingestion Hazardous in case of ingestion.
Potential Chronic Health Effects
Carcinogenic Effects This material is not known to cause cancer in animals or humans.
Additional information See Toxicological Information (section 11)
Medical Conditions Aggravated by Overexposure: Repeated exposure to a highly toxic material may produce general deterioration of health by an accumulation in one or many human organs.


Section 4. First Aid Measures
Eye Contact Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention immediately.
Skin Contact In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cover the irritated skin with an emollient. Cold water may be used. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention immediately.
Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
Ingestion If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention immediately.


Section 5. Fire Fighting Measures
Flammability of the Product May be combustible at high temperature.
Auto-ignition Temperature Not available.
Flash Points Not available.
Flammable Limits Not available.
Products of Combustion Some metallic oxides.
Fire Hazards in Presence of Various Substances Not available.
Explosion Hazards in Presence of Various Substances Risks of explosion of the product in presence of static discharge: No.

Risks of explosion of the product in presence of mechanical impact: No.
Fire Fighting Media
and Instructions
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Protective Clothing (Fire) Be sure to use an approved/certified respirator or equivalent.
Special Remarks on Fire Hazards Not available.
Special Remarks on Explosion Hazards Not available.


Section 6. Accidental Release Measures
Small Spill and Leak Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill and Leak Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition sources. Call for assistance on disposal. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.
Spill Kit Information No specific spill kit required for this product.


Section 7. Handling and Storage
Handling Avoid contact with eyes, skin and clothing. Do not ingest. Avoid breathing dust. Keep container closed.
Storage Keep container in a cool, well-ventilated area.


Section 8. Exposure Controls/Personal Protection
Engineering Controls Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection
Eyes Splash goggles.
Body Lab coat.
Respiratory Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate.
Hands Gloves.
Feet Not applicable.
Protective Clothing (Pictograms)
Splash goggles Lab coat Dust Respirator Gloves
Personal Protection in Case of a Large Spill Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self-contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Product Name Exposure Limits
Zinc Sulfate SUVA (Switzerland, 1997). Skin
Kurzzeitsgrenzwerte: 0.2 mg/m3 15 minute(s).
MAK: 0.1 mg/m3 8 hour(s).


Section 9. Physical and Chemical Properties
Odor Odorless.
Color Colorless. White.
Physical State and Appearance Solid. (Crystals or powder)
Molecular Weight 287.56 g/mole
Molecular Formula ZnSO4 . 7H2O
pH Not available.
Boiling/Condensation Point Not available.
Melting/Freezing Point Not available.
Specific Gravity Not available.
Vapor Pressure Not available.
Vapor Density Not available.
Odor Threshold Not available.
Evaporation Rate Not available.
LogKow Not available.
Solubility Soluble in water.


+ Section 10. Stability and Reactivity
Stability and Reactivity The product is stable.
Conditions of Instability Not available.
Incompatibility with Various Substances Reactive with acids, moisture.
Rem/Incompatibility Not available.
Hazardous Decomposition Products sulfur oxides (SO2, SO3...) , Zinc Oxide.
Hazardous Polymerization Will not occur.


Section 11. Toxicological Information
RTECS Number:
Zinc Sulfate, Heptahydrate Not available.
Toxicity LD50: Not available.
LC50: Not available.
Chronic Effects on Humans Not available.
Acute Effects on Humans Extremely hazardous in case of eye contact (irritant). Inflammation of the eye is characterized by redness, watering, and itching. Hazardous in case of skin contact (irritant). Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering. Hazardous in case of inhalation (lung irritant). May be hazardous in case of inhalation. Hazardous in case of ingestion.
Synergetic Products (Toxicologically) Not available.
Irritancy Draize Test: Not available.
Sensitization Not available.
Carcinogenic Effects This material is not known to cause cancer in animals or humans.
Toxicity to Reproductive System Not available.
Teratogenic Effects Not available.
Mutagenic Effects Not available.


Section 12. Ecological Information
Ecotoxicity Not available.
BOD5 and COD Not available.
Toxicity of the Products of Biodegradation The products of degradation are less toxic than the product itself.


Section 13. Disposal Considerations
EPA Waste Number Not available.
Treatment Material does not have an EPA Waste Number and is not a listed waste, however consultation with a permitted waste disposal site (TSD) should be accomplished. Always contact a permitted waste disposal (TSD) to assure compliance with all current local, state, and Federal Regulations.


Section 14. Transport Information
DOT Classification Proper Shipping Name: CHEMICALS,N.O.S.
RQ: Not applicable.
TDG Classification Not available.
IMO/IMDG Classification Not available.
ICAO/IATA Classification Not available.


+ Section 15. Regulatory Information
U.S. Federal Regulations TSCA 8(b) inventory: Zinc Sulfate
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: Zinc Sulfate
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: Zinc Sulfate: Immediate (Acute) Health Hazard
SARA 313 toxic chemical notification and release reporting: No products were found.
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean air act (CAA) 112 accidental release prevention: No products were found.
Clean air act (CAA) 112 regulated flammable substances: No products were found.
Clean air act (CAA) 112 regulated toxic substances: No products were found.
WHMIS (Canada) Class D-2B: Material causing other toxic effects (TOXIC).
No products were found.
This product has been classifed in accordance with the hazard criteria of the Controlled Product Regulations and the MSDS contains all required information.
International Regulations
EINECS Not available.
DSCL (EEC) R37/38- Irritating to respiratory system and skin.
R41- Risk of serious damage to eyes.
International Lists Australia (NICNAS): Zinc Sulfate

Japan (MITI): Zinc Sulfate

Japan (MOL): Zinc Sulfate

Philippines (RA6969): Zinc Sulfate
China: No products were found.
State Regulations No products were found.
California prop. 65: No products were found.


Section 16. Other Information
National Fire Protection Association (U.S.A.)
0

Health
2
0
Fire Hazard

Reactivity

Specific Hazard
Changed Since Last Revision +
Notice to Reader
The statements contained herein are based upon technical data that EMD Chemicals Inc. believes to be reliable, are offered for information purposes only and as a guide to the appropriate precautionary and emergency handling of the material by a properly trained person having the necessary technical skills. Users should consider these data only as a supplement to other information gathered by them and must make independent determinations of suitability and completeness of information from all sources to assure proper use, storage and disposal of these materials and the safety and health of employees and customers and the protection of the environment. EMD CHEMICALS INC. MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, WITH RESPECT TO THE INFORMATION HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.