Caustic Spill Kit, SpillSolv ® SX1320 Page: 1/1


Material Safety Data Sheet
Caustic Spill Kit, SpillSolv ®
EMD Logo
Section 1. Product and Company Identification
Product name : Caustic Spill Kit, SpillSolv ®
Product code : SX1320
Synonym : None.
Material uses : Other non-specified industry: Analytical reagent.
Manufacturer : EMD Chemicals Inc.
P.O. Box 70
480 Democrat Road
Gibbstown, NJ 08027
856-423-6300 Technical Service
Monday - Friday: 8:00 - 5:00 PM
Validation date : 1/8/2007.
Print date :
In case of emergency : 800-424-9300 CHEMTREC (USA)
613-996-6666 CANUTEC (Canada)
24 Hours/Day: 7 Days/Week


Section 2. Hazards Identification
Physical state : Solid. (Powder.)
OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). 
Emergency overview : WARNING!
CAUSES SEVERE EYE IRRITATION.
CAUSES RESPIRATORY TRACT AND SKIN IRRITATION.
Avoid contact with skin and clothing. Avoid breathing dust. Keep container closed. Use only with adequate ventilation. Wash thoroughly after handling.
Routes of entry : Inhalation. Ingestion.
Potential acute health effects
Eyes : Severely irritating to eyes.
Skin : Irritating to skin.
Inhalation : Irritating to respiratory system.
Ingestion : Ingestion may cause gastrointestinal irritation and diarrhea.
Carcinogenic effects : No known significant effects or critical hazards.
Mutagenic effects : No known significant effects or critical hazards.
Teratogenicity / Reproductive toxicity : No known significant effects or critical hazards.
Medical conditions aggravated by over-exposure : Repeated skin exposure can produce local skin destruction or dermatitis. Repeated or prolonged exposure to the substance can produce lung damage. Repeated exposure of the eyes to a low level of dust can produce eye irritation.
See toxicological information (section 11)


Section 3. Composition/Information on Ingredients
United States
Name CAS number % by Weight
Citric Acid, Anhydrous 77-92-9 60 - 100


Section 4. First Aid Measures
Eye contact : Get medical attention immediately. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Chemical burns must be treated promptly by a physician.
Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Inhalation : Move exposed person to fresh air. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Ingestion : Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if symptoms occur. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training.


Section 5. Fire Fighting Measures
Flammability of the product : No specific hazard.
Extinguishing media
Suitable : Use an extinguishing agent suitable for the surrounding fire.
Not suitable : None known.
Special exposure hazards : Not available.
Special protective equipment for fire-fighters : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special remarks on explosion hazards : Potentially explosive reaction with metal nitrates. (Citric Acid, Anhydrous )


Section 6. Accidental Release Measures
Personal precautions : Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable protective equipment.
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Methods for cleaning up : If emergency personnel are unavailable, vacuum or carefully scoop up spilled material and place in an appropriate container for disposal by incineration. Avoid creating dusty conditions and prevent wind dispersal.


Section 7. Handling and Storage
Handling : Avoid contact with eyes, skin and clothing. Keep container closed. Use only with adequate ventilation. Avoid breathing dust. Wash thoroughly after handling.
Storage : Keep container tightly closed. Keep container in a cool, well-ventilated area.


Section 8. Exposure Controls/Personal Protection
Consult local authorities for acceptable exposure limits.
Engineering measures : Use only with adequate ventilation. If user operations generate dust, fumes, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Personal protection
Eyes : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts.
Recommended: safety glasses with side-shields
Skin : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Body: Recommended: lab coat
Respiratory : Use a properly fitted, particulate filter respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Hands : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Recommended: nitrile rubber
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.


Section 9. Physical and Chemical Properties
Physical state : Solid. (Powder.)
Color : Colorless to light yellow.
Melting/freezing point : 152.85°C (307.1°F) based on data for: Citric Acid, Anhydrous .
Relative density : The only known value is 1.54 (Water = 1) (Citric Acid, Anhydrous ).


Section 10. Stability and Reactivity
Stability and reactivity : The product is stable.
Incompatibility with various substances : Reactive or incompatible with the following materials: alkalis.
Hazardous decomposition products : carbon oxides (CO, CO2)
Hazardous polymerization : Will not occur.


Section 11. Toxicological Information
Toxicity data
United States
Product/ingredient name Test Result Route Species
Citric Acid, Anhydrous LD50 5040 mg/kg Oral Mouse
Other toxic effects on humans : Extremely hazardous in case of eye contact (irritant).
Very hazardous in case of skin contact (irritant), of inhalation (lung irritant).
Specific effects
Carcinogenic effects : No known significant effects or critical hazards.
Mutagenic effects : No known significant effects or critical hazards.
Teratogenicity / Reproductive toxicity : No known significant effects or critical hazards.
Sensitization
Ingestion : No known significant effects or critical hazards.
Inhalation : Irritating to respiratory system.
Eyes : Severely irritating to eyes.
Skin : Irritating to skin.


Section 12. Ecological Information
Environmental precautions : No known significant effects or critical hazards.
Products of degradation : These products are carbon oxides (CO, CO2) and water.
Toxicity of the products of biodegradation : The product itself and its products of degradation are not toxic.


Section 13. Disposal Considerations
Waste disposal : The generation of waste should be avoided or minimized wherever possible. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Disposal should be in accordance with applicable regional, national and local laws and regulations. Local regulations may be more stringent than regional or national requirements.

The information presented below only applies to the material as supplied. The identification based on characteristic(s) or listing may not apply if the material has been used or otherwise contaminated. It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste identification and disposal methods in compliance with applicable regulations.

Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION for additional handling information and protection of employees.


Section 14. Transport Information
Regulatory information UN number Proper shipping name Class PG* Label Additional information
DOT Classification - CHEMICALS, N.O.S. - - Not available.
PG* : Packing group


Section 15. Regulatory Information
United States
HCS Classification : Irritating material
U.S. Federal regulations : TSCA 8(b) inventory: Listed
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: Citric Acid, Anhydrous
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: Citric Acid, Anhydrous : Immediate (acute) health hazard
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean Air Act (CAA) 112 accidental release prevention: No products were found.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found.
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
State regulations : No products were found.
Canada
WHMIS (Canada) : Class D-2B: Material causing other toxic effects (Toxic).
CEPA DSL/CEPA NDSL : CEPA DSL: Citric Acid, Anhydrous
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
EU regulations
Risk phrases : This product is not classified according to EU legislation.
International regulations
International lists : Australia (NICNAS): Citric Acid, Anhydrous

China: Citric Acid, Anhydrous

Germany water class: Citric Acid, Anhydrous

Japan (METI): Citric Acid, Anhydrous

Korea (TCCL): Citric Acid, Anhydrous

Philippines (RA6969): Citric Acid, Anhydrous


Section 16. Other Information
Label requirements : WARNING!
CAUSES SEVERE EYE IRRITATION.
CAUSES RESPIRATORY TRACT AND SKIN IRRITATION.
National Fire Protection Association (U.S.A.) :

Health
0 Flammability
1 0 Instability
Special
Other special considerations : Contains additional nonhazardous component(s) not released by the manufacturer.
Notice to reader
The statements contained herein are based upon technical data that EMD Chemicals Inc. believes to be reliable, are offered for information purposes only and as a guide to the appropriate precautionary and emergency handling of the material by a properly trained person having the necessary technical skills. Users should consider these data only as a supplement to other information gathered by them and must make independent determinations of suitability and completeness of information from all sources to assure proper use, storage and disposal of these materials and the safety and health of employees and customers and the protection of the environment. EMD CHEMICALS INC. MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE, WITH RESPECT TO THE INFORMATION HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS.